[PATCH v5 2/7] ASoC: qcom: sdm845: use DSP_A format for TDM codec DAIs

[David Heidelberg via B4 Relay <devnull+david.ixit.cz@kernel.org>]

From: David Heidelberg <david@ixit.cz>

cs35l36 set_dai_fmt() never accepted DSP_B, so old DSP_B was broken with
"Left TDM fmt err:-22", not silently wrong timing.
cs35l36 codec was patched to map both DSP_A and DSP_B to the same
hardware register value (asp_fmt = 0), which is inherently DSP_A timing.
Use the right codec (DSP_A) which works as expected.

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 sound/soc/qcom/sdm845.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c
index 0ce8265ab1c1f..d1cc825fc5cdc 100644
--- a/sound/soc/qcom/sdm845.c
+++ b/sound/soc/qcom/sdm845.c
@@ -382,17 +382,17 @@ static int sdm845_snd_startup(struct snd_pcm_substream *substream)
 	case QUATERNARY_TDM_RX_0:
 	case QUATERNARY_TDM_TX_0:
 		if (++(data->quat_tdm_clk_count) == 1) {
 			snd_soc_dai_set_sysclk(cpu_dai,
 				Q6AFE_LPASS_CLK_ID_QUAD_TDM_IBIT,
 				TDM_BCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK);
 		}
 
-		codec_dai_fmt |= SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_DSP_B;
+		codec_dai_fmt |= SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_DSP_A;
 
 		for_each_rtd_codec_dais(rtd, j, codec_dai) {
 
 			if (!strcmp(codec_dai->component->name_prefix,
 				    "Left")) {
 				ret = snd_soc_dai_set_fmt(
 						codec_dai, codec_dai_fmt);
 				if (ret < 0) {

-- 
2.55.0