[PATCH v6 1/2] dt-bindings: clock: gpio-gate-clock: Add a new compatible string

[Vyacheslav Yurkov via B4 Relay <devnull+V.Yurkov.EXT.bruker.com@kernel.org>]

From: Vyacheslav Yurkov <V.Yurkov.EXT@bruker.com>

Extend the binding to be used also for gpio-locked-fixed-clock.
A GPIO-locked fixed clock provider exposes a fixed-rate clock whose
availability depends on one or more GPIO lock-status signals.

Some hardware designs provide fixed-frequency clocks generated outside
software control, such as by FPGA-resident PLLs. While the clock rate is
fixed, a separate GPIO signal indicates whether the clock source is
locked and producing a valid output.

Signed-off-by: Vyacheslav Yurkov <V.Yurkov.EXT@bruker.com>
---
 .../devicetree/bindings/clock/gpio-gate-clock.yaml | 32 ++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml b/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
index d09d0e3f0c6e..f44fdb17b627 100644
--- a/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: gpio-gate-clock
+    enum:
+      - gpio-gate-clock
+      - gpio-locked-clock
 
   clocks:
     maxItems: 1
@@ -23,10 +25,29 @@ properties:
     description: GPIO reference for enabling and disabling the clock.
     maxItems: 1
 
+  enabled-gpios:
+    description: GPIO that indicates whether the clock is enabled or disabled.
+    maxItems: 1
+
 required:
   - compatible
   - '#clock-cells'
-  - enable-gpios
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: gpio-gate-clock
+    then:
+      required:
+        - enable-gpios
+  - if:
+      properties:
+        compatible:
+          const: gpio-locked-fixed-clock
+    then:
+      required:
+        - enabled-gpios
 
 additionalProperties: false
 
@@ -40,3 +61,10 @@ examples:
         #clock-cells = <0>;
         enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
     };
+
+    clk_gpio_locked {
+        compatible = "gpio-locked-fixed-clock";
+        #clock-cells = <0>;
+        clocks = <&pll>;
+        enabled-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+    };

-- 
2.34.1