From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-pz2-f12.google.com (mail-pz2-f12.google.com [74.125.228.12]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 2B7D63D565B for ; Tue, 29 Sep 2026 02:09:05 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=74.125.228.12 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1790647746; cv=none; b=Z4cnIubuhAM0bFXJbhxslTnlBLE3TN2/T8I4s+FbRTArvvmsJDQ0GzTRSaJXQ5j8OeabE0W3YHT1TZYxK2zlG9HsYF+T+MLM1g+FKk/nR6qxwRSZXlssiCYY+HPcABwcy/J4VbJw/mlou8zKCjSnCrvQ4SXph/XHwFPEiqfHWgs= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1790647746; c=relaxed/simple; bh=UesWAnvidu5V+vT7hnQQOomMWRZS3pnTvN95fJQ+MW4=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=UD43u2mDAcpyGQLeg8U1+n+e/CIYCVByvrUf6aQvXj0X72Ik44+L2ifZolphVghflxyKSsgS/jvOWC0F74dfnkksxtjja/QhhFyIvdnjlwLs+2grJvP7m2waa5EBLBMwGHgbNQsrIUCngJt4M4lLS+d5mhHyHtKwq2jeixO7OZg= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=ggvkrC7j; arc=none smtp.client-ip=74.125.228.12 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="ggvkrC7j" Received: by mail-pz2-f12.google.com with SMTP id d2e1a72fcca58-8693af0d7c4so2117045b3a.3 for ; Mon, 28 Sep 2026 19:09:05 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1790647744; x=1791252544; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to:content-type; bh=X72fT8j3aTk48j/y0v4w7hMGoPZwDLH0NPKuxge34uQ=; b=ggvkrC7jQ3d7do5Y3WTVRcytrz1+hDRlxvVCurwqdoFTuxA2Jh6G4fY6dwEbuMA2ud BRlFnkmRzcP+gc+5/nZYYgglJAsz/r/k7LDcdYN8BbJDH6AQ3yo0QcS/7aRVxVflw5NJ K5L5Y4pbwNm8qw4mE6UWfb+ihgQoybuYb7H7r4jv1lAccrmaE1G1ZpI4NTGhitukhMpJ Vxevqej0jzpYQ8T9vIFKN/IcESMGc25a1x7TRz13l7GSZP7niLiEsz2GiYHqqfCCQgQc s9eozCpSkvfQ4yASBuDovw8WUUQtDRwSuaa0WCvbGW09kO+2zHsVRasPbaQtgErZ680t f9Ag== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20260707; t=1790647744; x=1791252544; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from :to:cc:subject:date:message-id:reply-to:content-type; bh=X72fT8j3aTk48j/y0v4w7hMGoPZwDLH0NPKuxge34uQ=; b=L7Zj94TZWZgyskfQrsSjwJfTdFpv9nCBYCwpRBE/ejgRP/iGFISYyAtXak5SRTLHPS SDmiXIPKguTZz2NkatXCH6axZBhBqop3GZVHxuy7LbZ8dY5IMXE0vOzxd2DaXnxJrlBZ xAkXs6D/rCzEhfXo3q6ux8IJbbZhwUjZXB3iNu5TRAR82hwlje7EukdGVnLwonCXueHS kym2O36zrEhR++eLrKEDaPm7HIVF/gUffQtdnTVxwaZ4QYKqf7i0nAvi4Y73EXypXSZ7 J6yo3JRvA+v7LVUvJcB/Cy/JWAYL3zZfiGm4PwKxXJXxfvDHSIhxF5PyBQXAmevCphlI 2vQQ== X-Forwarded-Encrypted: i=1; AKwUvByrQgU1MNy2ZSQcyUM5NT95xq2zU4jLYdZNRZY/J2l/SbDUM4/SizoMItRmx+dt+9CyjwrodrPHij93@vger.kernel.org X-Gm-Message-State: AFuF++lprjXC9fSINJOinYj7bol0HsUFf6Q/EW0A1mW4drJQbWYxtXpL 89l7x4HIOFF4xu7M2k6oykKdZZxtkMh0bqnA/eCB6SuBwaYneMP3ckKVTcCvlQ== X-Gm-Gg: AYBFou2QszaUZkXGABbbtunoEWcjTz6hp4D9ICns9O4hN44lyofdb7PFWgO+OJp9oDC w+Aaccxg/XmG36Dd6tSuOe3VbJkvPsagdnqH29n9RZdPtJgWzqBP06ymKlWqVc2uqerbRQx6+Ar F9sDdFyv+NRvvvFojT280quwhVdLuInF2g3zeHfSgTeOIY0ff5Js7rrPUqsuJMkXyeFL+F6wlaL f+YRiXIxq7cN/L/xDiDUu/UBkJ22DmR3ni3LF2X53StlhX81A12cLhCGutF9z3XQZm+48kWvgOz OFTPtO4SRHhd03FfZxglbLlBESYCAYFC5aLmBfq83WnebTsYZGnNy/uwHgrmmDf1uc93h0Lq3E7 0N3gNBHkL0VEh0ZtJJdj05gzM1lIO76I+nvyRJJ8rosRQaws9+9X+yIhOCySmIvnRKwUsxuF5DA +BJmXIzddto8XA3Y6li99q3IYpaXUUsAwhbNFE4785GNo38R5GAfeshSbx/8pRkEvE3Z2Vh3sCm RmwzUFJB1CNkmLnXML/sNcZaOkLzEGlsAMa436IIZMhoo7BFtm4KnD/jzO/xwIV X-Received: by 2002:a05:6a21:e104:b0:3dd:a197:cf1b with SMTP id adf61e73a8af0-3de0e8e18ccmr13432494637.63.1790647744404; Mon, 28 Sep 2026 19:09:04 -0700 (PDT) Received: from localhost.localdomain (60-250-196-139.hinet-ip.hinet.net. [60.250.196.139]) by smtp.gmail.com with ESMTPSA id 41be03b00d2f7-cc78796cf39sm5448596a12.32.2026.09.28.19.09.01 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 28 Sep 2026 19:09:04 -0700 (PDT) From: Joey Lu To: Vinod Koul , Neil Armstrong Cc: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Arnd Bergmann , Catalin Marinas , Jacky Huang , Shan-Chun Hung , Hui-Ping Chen , Joey Lu , linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Joey Lu , Krzysztof Kozlowski Subject: [PATCH v6 1/3] dt-bindings: phy: nuvoton,ma35d1-usb2-phy: extend for dual-port and OTG Date: Tue, 29 Sep 2026 10:08:52 +0800 Message-ID: <20260929020854.1282339-2-a0987203069@gmail.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20260929020854.1282339-1-a0987203069@gmail.com> References: <20260929020854.1282339-1-a0987203069@gmail.com> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit The MA35D1 exposes two USB PHY ports (PHY0 and PHY1) managed by the same hardware block (USBPMISCR register in the system-management syscon). PHY0 is shared between the DWC2 gadget controller and EHCI0/OHCI0 through an automatic hardware mux that follows the USB ID pin; PHY1 is dedicated to EHCI1/OHCI1. Because both ports share the same register topology a single binding and driver should cover both. Changing '#phy-cells' from const: 0 to enum: [0, 1] lets consumers name the port they need while preserving backward compatibility: boards already using '#phy-cells = <0>' continue to validate and function unchanged. The two new optional properties: - nuvoton,rcalcode: the resistor calibration trim code is determined at board design time to match the PCB trace impedance. Both PHY0 and PHY1 values must be supplied together when the property is present. - nuvoton,oc-active-high: the over-current detect polarity depends on the choice of VBUS power switch. Signed-off-by: Joey Lu Reviewed-by: Krzysztof Kozlowski --- .../bindings/phy/nuvoton,ma35d1-usb2-phy.yaml | 44 ++++++++++++++++++- 1 file changed, 42 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/nuvoton,ma35d1-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/nuvoton,ma35d1-usb2-phy.yaml index fff858c909a0..1bd22dd0e5fc 100644 --- a/Documentation/devicetree/bindings/phy/nuvoton,ma35d1-usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/nuvoton,ma35d1-usb2-phy.yaml @@ -8,6 +8,18 @@ title: Nuvoton MA35D1 USB2 phy maintainers: - Hui-Ping Chen + - Joey Lu + +description: + USB 2.0 PHY for the Nuvoton MA35D1 SoC. The PHY node is a standalone + platform device that accesses the USB PHY control registers inside the + system-management syscon block via the nuvoton,sys phandle. + + PHY0 is the OTG port whose signals are routed to either the DWC2 gadget + controller or the EHCI0/OHCI0 host controller by a hardware mux that + follows the USB ID pin automatically. + + PHY1 is a dedicated host-only port used by EHCI1/OHCI1. properties: compatible: @@ -15,7 +27,12 @@ properties: - nuvoton,ma35d1-usb2-phy "#phy-cells": - const: 0 + enum: [0, 1] + description: + When 0, the node exposes PHY0 only and consumers reference it + with no cell argument. When 1, the single cell selects the port, + with 0 for the OTG port (USB0, shared with DWC2 gadget controller) + and 1 for the host-only port (USB1). clocks: maxItems: 1 @@ -23,7 +40,29 @@ properties: nuvoton,sys: $ref: /schemas/types.yaml#/definitions/phandle description: - phandle to syscon for checking the PHY clock status. + Phandle to the system-management syscon node providing access to the + USB PHY control registers. + + nuvoton,rcalcode: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + minimum: 0 + maximum: 15 + description: + Resistor calibration trim codes for PHY0 and PHY1 respectively. + Each 4-bit value is written to the RCALCODE field in USBPMISCR and + adjusts the PHY's internal termination resistance. Both entries must + be supplied when this property is present; when absent the hardware + reset default is used for each port. + + nuvoton,oc-active-high: + type: boolean + description: + When present, the over-current detect input from the VBUS power switch + is treated as active-high. The default (property absent) is active-low. + This setting is shared by both USB host ports. required: - compatible @@ -42,4 +81,5 @@ examples: clocks = <&clk USBD_GATE>; nuvoton,sys = <&sys>; #phy-cells = <0>; + nuvoton,rcalcode = <7 7>; }; -- 2.43.0