From: Alexey Charkov <alchark@flipper.net>
To: "Sebastian Reichel" <sre@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Pali Rohár" <pali@kernel.org>, "Andrew F. Davis" <afd@ti.com>
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Alexey Charkov <alchark@flipper.net>
Subject: [PATCH 0/2] power: supply: bq27xxx: Add TI BQ28Z620 battery gauge
Date: Fri, 02 Oct 2026 16:02:53 +0400 [thread overview]
Message-ID: <20261002-bq28z620-v1-0-bdcc10d42519@flipper.net> (raw)
Add BQ28Z620, which is very similar to the already supported BQ28Z610 but
drops some registers and shifts the data flash layout as a result. This
means they are not strictly compatible, even though the existing Linux
driver for BQ28Z610 can drive the BQ28Z620 with no changes, due to it only
implementing the (unchanged) standard command set.
Signed-off-by: Alexey Charkov <alchark@flipper.net>
---
Alexey Charkov (2):
dt-bindings: power: supply: bq27xxx: add BQ28Z620
power: supply: bq27xxx: add support for BQ28Z620
Documentation/devicetree/bindings/power/supply/bq27xxx.yaml | 2 ++
drivers/power/supply/bq27xxx_battery.c | 6 ++++++
drivers/power/supply/bq27xxx_battery_i2c.c | 2 ++
include/linux/power/bq27xxx_battery.h | 1 +
4 files changed, 11 insertions(+)
---
base-commit: 9f24d789f03b22941b905ded43cb5ff8eea9ce62
change-id: 20261002-bq28z620-53468b7670b6
Best regards,
--
Alexey Charkov <alchark@flipper.net>
next reply other threads:[~2026-10-02 12:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-02 12:02 Alexey Charkov [this message]
2026-10-02 12:02 ` [PATCH 1/2] dt-bindings: power: supply: bq27xxx: add BQ28Z620 Alexey Charkov
2026-10-03 14:37 ` Krzysztof Kozlowski
2026-10-02 12:02 ` [PATCH 2/2] power: supply: bq27xxx: add support for BQ28Z620 Alexey Charkov
2026-10-04 17:46 ` [PATCH 0/2] power: supply: bq27xxx: Add TI BQ28Z620 battery gauge Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261002-bq28z620-v1-0-bdcc10d42519@flipper.net \
--to=alchark@flipper.net \
--cc=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=pali@kernel.org \
--cc=robh@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox