From: sashiko-bot@kernel.org
To: "Komal Bajaj" <komal.bajaj@oss.qualcomm.com>
Cc: conor+dt@kernel.org, devicetree@vger.kernel.org, robh@kernel.org
Subject: Re: [PATCH v3 1/2] dt-bindings: remoteproc: qcom,shikra-pas: Allow 3 IOMMUs for LPAICP
Date: Mon, 05 Oct 2026 11:24:58 +0000 [thread overview]
Message-ID: <20261005112458.6FAE61F000FF@smtp.kernel.org> (raw)
In-Reply-To: <20261005-shikra-el2-v3-1-618f7343695c@oss.qualcomm.com>
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [Medium] dt-bindings: remoteproc: qcom,shikra-pas: Broken inheritance drops #cooling-cells
- [Low] dt-bindings: remoteproc: qcom,shikra-pas: Missing minItems: 3 for iommus
--
commit e7d5ea05bb3cbb1ebebda930478b2df76f82dd6e
Author: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
dt-bindings: remoteproc: qcom,shikra-pas: Allow 3 IOMMUs for LPAICP
This patch removes the common PAS schema inheritance (qcom,pas-common.yaml)
and specifies local IOMMU entry limits for each Shikra PAS compatible. It
allows 3 IOMMU entries for the LPAICP variant, resolving a conflict where the
common schema previously limited iommus to a single entry.
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,shikra-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,shikra-pas.yaml
> index 34a2f15e93616..4196f61a8ba0c 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,shikra-pas.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,shikra-pas.yaml
[ ... ]
> @@ -92,10 +95,14 @@ required:
> - compatible
> - reg
> - memory-region
> + - clocks
> + - clock-names
> + - interrupts
> + - interrupt-names
> + - qcom,smem-states
> + - qcom,smem-state-names
>
> allOf:
> - - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
> -
> - if:
> properties:
> compatible:
[Severity: Medium]
Does removing the $ref to qcom,pas-common.yaml# cause the schema to lose
support for standard PAS features like #cooling-cells?
Because json-schema allOf cannot loosen constraints, the inheritance from the
common PAS schema was severed to resolve the conflict with the inherited
maxItems: 1 constraint on iommus.
However, this prevents qcom,shikra-pas.yaml from receiving future updates to
the common PAS schema and silently drops support for inherited properties.
Since unevaluatedProperties: false is used, any attempt to use #cooling-cells
in a Shikra PAS node will now trigger a schema validation error.
Would it be better to relax the iommus: maxItems constraint in
qcom,pas-common.yaml (e.g., to 3 or higher) and apply stricter local
constraints where needed, rather than breaking the inheritance chain?
[ ... ]
> @@ -134,6 +143,8 @@ allOf:
> minItems: 2
> firmware-name:
> minItems: 2
> + iommus:
> + maxItems: 3
[Severity: Low]
Should there be a minItems: 3 constraint added here?
The commit message explicitly states: "The Shikra LPAICP PAS requires three
IOMMU entries." However, maxItems only sets an upper bound.
Without minItems: 3, incomplete device tree overlays with only 1 or 2 iommus
entries will silently pass schema validation despite violating the strict
hardware requirement.
Making the property mandatory via required: would be incorrect since iommus
is intentionally omitted from the base DT and added via an EL2 overlay, but
when the property is present, the 3-entry minimum size constraint must be
enforced.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261005-shikra-el2-v3-0-618f7343695c@oss.qualcomm.com?part=1
next prev parent reply other threads:[~2026-10-05 11:24 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-05 11:14 [PATCH v3 0/2] arm64: dts: qcom: shikra: Add EL2 overlay for EVK variants Komal Bajaj
2026-10-05 11:14 ` [PATCH v3 1/2] dt-bindings: remoteproc: qcom,shikra-pas: Allow 3 IOMMUs for LPAICP Komal Bajaj
2026-10-05 11:24 ` sashiko-bot [this message]
2026-10-05 15:37 ` Mukesh Ojha
2026-10-05 11:14 ` [PATCH v3 2/2] arm64: dts: qcom: shikra: Add EL2 overlay for remoteproc SMMU mappings Komal Bajaj
2026-10-05 11:18 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261005112458.6FAE61F000FF@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=komal.bajaj@oss.qualcomm.com \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox