From: Francesco Dolcini <francesco@dolcini.it>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Cc: Francesco Dolcini <francesco.dolcini@toradex.com>,
devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: freescale: imx952: Add GPIO5 lines 18 to 20
Date: Mon, 5 Oct 2026 19:26:21 +0200 [thread overview]
Message-ID: <20261005172622.135725-1-francesco@dolcini.it> (raw)
From: Francesco Dolcini <francesco.dolcini@toradex.com>
Add missing GPIO5 lines, GPIO_IO38, GPIO_IO39 and GPIO_IO40 are
GPIO-only pads fixed to GPIO5[18:20], their SW_MUX_CTL registers have no
MUX_MODE field (IMX952RM Rev.1, 2026-07-08, sections 33.3.2.44-46 and
33.3.2.184-186).
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
arch/arm64/boot/dts/freescale/imx952-pinfunc.h | 6 ++++++
arch/arm64/boot/dts/freescale/imx952.dtsi | 4 ++--
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx952-pinfunc.h b/arch/arm64/boot/dts/freescale/imx952-pinfunc.h
index debe6ede2d70..72cfe7893af8 100644
--- a/arch/arm64/boot/dts/freescale/imx952-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx952-pinfunc.h
@@ -307,6 +307,12 @@
#define IMX952_PAD_GPIO_IO37__WAKEUPMIX_TOP_LPUART7_RX 0x00A4 0x02D4 0x05B0 0x02 0x01
#define IMX952_PAD_GPIO_IO37__WAKEUPMIX_TOP_LPSPI4_SCK 0x00A4 0x02D4 0x0568 0x04 0x01
+#define IMX952_PAD_GPIO_IO38__WAKEUPMIX_TOP_GPIO5_IO_18 0x00A8 0x02D8 0x0000 0x00 0x00
+
+#define IMX952_PAD_GPIO_IO39__WAKEUPMIX_TOP_GPIO5_IO_19 0x00AC 0x02DC 0x0000 0x00 0x00
+
+#define IMX952_PAD_GPIO_IO40__WAKEUPMIX_TOP_GPIO5_IO_20 0x00B0 0x02E0 0x0000 0x00 0x00
+
#define IMX952_PAD_CCM_CLKO1__CCMSRCGPCMIX_TOP_CLKO_1 0x00D4 0x0304 0x0000 0x00 0x00
#define IMX952_PAD_CCM_CLKO1__NETCMIX_TOP_NETC_TMR_1588_TRIG1 0x00D4 0x0304 0x0494 0x01 0x00
#define IMX952_PAD_CCM_CLKO1__WAKEUPMIX_TOP_FLEXIO1_FLEXIO_26 0x00D4 0x0304 0x04AC 0x04 0x00
diff --git a/arch/arm64/boot/dts/freescale/imx952.dtsi b/arch/arm64/boot/dts/freescale/imx952.dtsi
index 1154b66dadb2..4930e09e0206 100644
--- a/arch/arm64/boot/dts/freescale/imx952.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx952.dtsi
@@ -1076,8 +1076,8 @@ gpio5: gpio@43850000 {
clocks = <&scmi_clk IMX952_CLK_BUSWAKEUP>,
<&scmi_clk IMX952_CLK_BUSWAKEUP>;
clock-names = "gpio", "port";
- gpio-ranges = <&scmi_iomuxc 0 103 12>, <&scmi_iomuxc 12 36 6>;
- ngpios = <18>;
+ gpio-ranges = <&scmi_iomuxc 0 103 12>, <&scmi_iomuxc 12 36 9>;
+ ngpios = <21>;
};
aips1: bus@44000000 {
--
2.47.3
next reply other threads:[~2026-10-05 17:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-05 17:26 Francesco Dolcini [this message]
2026-10-05 17:32 ` [PATCH] arm64: dts: freescale: imx952: Add GPIO5 lines 18 to 20 Francesco Dolcini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261005172622.135725-1-francesco@dolcini.it \
--to=francesco@dolcini.it \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=francesco.dolcini@toradex.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox