From: Ryan Chen <ryan_chen@aspeedtech.com>
To: Stefan Schaeckeler <sschaeck@cisco.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>,
Borislav Petkov <bp@alien8.de>, Tony Luck <tony.luck@intel.com>
Cc: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<linux-edac@vger.kernel.org>, Borislav Petkov <bp@suse.de>,
Ryan Chen <ryan_chen@aspeedtech.com>
Subject: [PATCH v5 2/9] EDAC/aspeed: Free the interrupt before the mem_ctl_info on remove
Date: Wed, 7 Oct 2026 14:13:19 +0800 [thread overview]
Message-ID: <20261007-edac-v5-2-5c31fc5df4cf@aspeedtech.com> (raw)
In-Reply-To: <20261007-edac-v5-0-5c31fc5df4cf@aspeedtech.com>
The ECC interrupt is devm-managed, so it is only released after .remove()
has returned, and masking the controller does not wait for a handler
already running on another CPU. edac_mc_free() can therefore free the
mem_ctl_info the handler uses as its context while it is still running.
Register the handler with request_irq() and free it before the memory
it uses. aspeed_probe() returns as soon as config_irq() succeeds, so
devres has no error path left to unwind.
Fixes: 9b7e6242ee4e ("EDAC, aspeed: Add an Aspeed AST2500 EDAC driver")
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
---
Changes in v5:
- Use request_irq()/free_irq() rather than devm_request_irq() followed
by an explicit free, and keep the interrupt number in a file-scope
variable so aspeed_remove() does not have to call platform_get_irq()
a second time.
Changes in v4:
- Drop the Cc: stable tag.
Changes in v2:
- New patch.
---
drivers/edac/aspeed_edac.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/edac/aspeed_edac.c b/drivers/edac/aspeed_edac.c
index 83d60414f89a..cb233a33d29a 100644
--- a/drivers/edac/aspeed_edac.c
+++ b/drivers/edac/aspeed_edac.c
@@ -36,6 +36,7 @@
static struct regmap *aspeed_regmap;
+static int aspeed_irq;
static int regmap_reg_write(void *context, unsigned int reg, unsigned int val)
@@ -212,11 +213,12 @@ static int config_irq(void *ctx, struct platform_device *pdev)
if (irq < 0)
return irq;
- rc = devm_request_irq(&pdev->dev, irq, mcr_isr, IRQF_TRIGGER_HIGH,
- DRV_NAME, ctx);
+ rc = request_irq(irq, mcr_isr, IRQF_TRIGGER_HIGH, DRV_NAME, ctx);
if (rc)
return rc;
+ aspeed_irq = irq;
+
/* enable interrupts */
regmap_update_bits(aspeed_regmap, ASPEED_MCR_INTR_CTRL,
ASPEED_MCR_INTR_CTRL_ENABLE,
@@ -364,6 +366,8 @@ static void aspeed_remove(struct platform_device *pdev)
regmap_update_bits(aspeed_regmap, ASPEED_MCR_INTR_CTRL,
ASPEED_MCR_INTR_CTRL_ENABLE, 0);
+ free_irq(aspeed_irq, platform_get_drvdata(pdev));
+
/* free resources */
mci = edac_mc_del_mc(&pdev->dev);
if (mci)
--
2.34.1
next prev parent reply other threads:[~2026-10-07 6:13 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-07 6:13 [PATCH v5 0/9] Add Aspeed AST2700 SDRAM EDAC support Ryan Chen
2026-10-07 6:13 ` [PATCH v5 1/9] EDAC/aspeed: Set the DIMM grain Ryan Chen
2026-10-07 6:13 ` Ryan Chen [this message]
2026-10-07 6:13 ` [PATCH v5 3/9] EDAC/aspeed: Clean up whitespace and include ordering Ryan Chen
2026-10-07 6:13 ` [PATCH v5 4/9] EDAC/aspeed: Free the mem_ctl_info unconditionally on remove Ryan Chen
2026-10-07 6:13 ` [PATCH v5 5/9] dt-bindings: edac: aspeed: Add AST2700 SDRAM EDAC Ryan Chen
2026-10-07 6:13 ` [PATCH v5 6/9] EDAC/aspeed: Replace regmap with direct register access Ryan Chen
2026-10-07 6:22 ` sashiko-bot
2026-10-07 6:13 ` [PATCH v5 7/9] EDAC/aspeed: Abstract SoC differences behind chip data Ryan Chen
2026-10-07 6:13 ` [PATCH v5 8/9] EDAC/aspeed: Add AST2700 support Ryan Chen
2026-10-07 6:13 ` [PATCH v5 9/9] MAINTAINERS: Step down as Aspeed AST2500 EDAC driver maintainer Ryan Chen
2026-10-07 20:32 ` Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261007-edac-v5-2-5c31fc5df4cf@aspeedtech.com \
--to=ryan_chen@aspeedtech.com \
--cc=andrew@codeconstruct.com.au \
--cc=bp@alien8.de \
--cc=bp@suse.de \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sschaeck@cisco.com \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox