From: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
To: Johannes Berg <johannes@sipsolutions.net>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jeff Johnson <jjohnson@kernel.org>
Cc: linux-wireless@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, ath12k@lists.infradead.org,
Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>,
Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Subject: [PATCH ath-next 00/17] wifi: ath12k: Add support for QCN6432
Date: Thu, 08 Oct 2026 15:53:56 +0530 [thread overview]
Message-ID: <20261008-mpp_bringup-v1-0-2c5797b5e4ac@oss.qualcomm.com> (raw)
QCN6432 is a PCIe-based device attached to the WCSS Q6 processor. It is
registered as a platform device (AHB), and remoteproc APIs are used to
boot and shut down the device, similar to other AHB-based devices such
as IPQ5332.
However, PCI APIs are used for device setup and register access. Since
QCN6432 requires both AHB and PCI APIs for its operation, a hybrid
AHB/PCI approach is implemented.
Overview:
- Patch [1/17] adds DT binding documentation for QCN6432.
- Patch [2/17] refactors PCI operations and MSI config structure to
support different MSI configurations.
- Patches [3,4,5/17] add hardware parameters, ring mask, and registers
for QCN6432.
- Patch [6/17] moves multi MSI vector flag to ath12k_dev_flags.
- Patches [7,8/17] add hybrid_bus_type and HIF operations support for
QCN6432.
- Patch [9/17] adds support for unified data-region memory allocation.
- Patch [10/17] moves MSI config to pcic for better abstraction.
- Patches [11,12/17] enable MSI interrupt support for CE and DP rings
specific to QCN6432.
- Patch [13/17] uses CMEM write for PPT on hybrid bus devices.
- Patch [14/17] stores and uses per CE DP MSI data for QCN6432.
- Patch [15/17] derives QMI service instance ID per protection domain.
- Patch [16/17] add userpd ID mapping per device.
- Patch [17/17] adds support for QCN6432 in the driver.
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
---
Aaradhana Sahu (10):
dt-bindings: net: wireless: Add QCN6432 device tree binding documentation
wifi: ath12k: Refactor PCI operations and MSI config structure
wifi: ath12k: move multi MSI vector flag to ath12k_dev_flags
wifi: ath12k: Add hybrid_bus_type in ath12k_hw_params
wifi: ath12k: add support for unified data-region memory allocation
wifi: ath12k: move MSI config to pci.c
wifi: ath12k: Add platform MSI support for CE
wifi: ath12k: use CMEM write for PPT on hybrid bus devices
wifi: ath12k: Resolve userPD ID per device
wifi: ath12k: Add QCN6432 AHB support
Sowmiya Sree Elavalagan (7):
wifi: ath12k: Add hardware parameter for QCN6432
wifi: ath12k: Add hardware ring mask for QCN6432
wifi: ath12k: add hardware registers for QCN6432
wifi: ath12k: Add hif operation support for QCN6432
wifi: ath12k: Enable MSI interrupt support for DP interrupt
wifi: ath12k: store and use MSI data per CE and DP interrupt group for QCN6432
wifi: ath12k: Derive QMI service instance ID per protection domain
.../bindings/net/wireless/qcom,qcn6432-wifi.yaml | 149 +++++++
drivers/net/wireless/ath/ath12k/Makefile | 2 +-
drivers/net/wireless/ath/ath12k/ahb.c | 51 ++-
drivers/net/wireless/ath/ath12k/ahb.h | 10 +-
drivers/net/wireless/ath/ath12k/ce.c | 7 +-
drivers/net/wireless/ath/ath12k/ce.h | 6 +
drivers/net/wireless/ath/ath12k/core.c | 10 +-
drivers/net/wireless/ath/ath12k/core.h | 24 ++
drivers/net/wireless/ath/ath12k/dp.c | 39 +-
drivers/net/wireless/ath/ath12k/dp.h | 2 +-
drivers/net/wireless/ath/ath12k/hif.h | 30 ++
drivers/net/wireless/ath/ath12k/hw.h | 8 +-
drivers/net/wireless/ath/ath12k/mhi.c | 4 +-
drivers/net/wireless/ath/ath12k/pci.c | 111 +++---
drivers/net/wireless/ath/ath12k/pci.h | 21 +-
drivers/net/wireless/ath/ath12k/pcic.c | 434 +++++++++++++++++++++
drivers/net/wireless/ath/ath12k/pcic.h | 24 ++
drivers/net/wireless/ath/ath12k/qmi.c | 83 +++-
drivers/net/wireless/ath/ath12k/qmi.h | 1 +
drivers/net/wireless/ath/ath12k/wifi7/ahb.c | 45 ++-
drivers/net/wireless/ath/ath12k/wifi7/hal.c | 7 +
.../net/wireless/ath/ath12k/wifi7/hal_qcn9274.c | 85 ++++
.../net/wireless/ath/ath12k/wifi7/hal_qcn9274.h | 1 +
drivers/net/wireless/ath/ath12k/wifi7/hw.c | 141 +++++++
drivers/net/wireless/ath/ath12k/wifi7/pci.c | 22 +-
25 files changed, 1213 insertions(+), 104 deletions(-)
---
base-commit: 17e4b9ea527b6c9491bed60f646bb2eff7d8db7b
change-id: 20261008-mpp_bringup-ea2187d10a28
next reply other threads:[~2026-10-08 10:24 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-08 10:23 Aaradhana Sahu [this message]
2026-10-08 10:23 ` [PATCH ath-next 01/17] dt-bindings: net: wireless: Add QCN6432 device tree binding documentation Aaradhana Sahu
2026-10-09 10:30 ` Krzysztof Kozlowski
2026-10-08 10:23 ` [PATCH ath-next 02/17] wifi: ath12k: Refactor PCI operations and MSI config structure Aaradhana Sahu
2026-10-08 10:23 ` [PATCH ath-next 03/17] wifi: ath12k: Add hardware parameter for QCN6432 Aaradhana Sahu
2026-10-08 10:24 ` [PATCH ath-next 04/17] wifi: ath12k: Add hardware ring mask " Aaradhana Sahu
2026-10-08 10:24 ` [PATCH ath-next 05/17] wifi: ath12k: add hardware registers " Aaradhana Sahu
2026-10-08 10:24 ` [PATCH ath-next 06/17] wifi: ath12k: move multi MSI vector flag to ath12k_dev_flags Aaradhana Sahu
2026-10-08 10:24 ` [PATCH ath-next 07/17] wifi: ath12k: Add hybrid_bus_type in ath12k_hw_params Aaradhana Sahu
2026-10-08 10:24 ` [PATCH ath-next 08/17] wifi: ath12k: Add hif operation support for QCN6432 Aaradhana Sahu
2026-10-08 10:24 ` [PATCH ath-next 09/17] wifi: ath12k: add support for unified data-region memory allocation Aaradhana Sahu
2026-10-08 10:35 ` sashiko-bot
2026-10-08 10:24 ` [PATCH ath-next 10/17] wifi: ath12k: move MSI config to pci.c Aaradhana Sahu
2026-10-08 10:24 ` [PATCH ath-next 11/17] wifi: ath12k: Add platform MSI support for CE Aaradhana Sahu
2026-10-08 10:41 ` sashiko-bot
2026-10-08 10:24 ` [PATCH ath-next 12/17] wifi: ath12k: Enable MSI interrupt support for DP interrupt Aaradhana Sahu
2026-10-08 10:45 ` sashiko-bot
2026-10-08 10:24 ` [PATCH ath-next 13/17] wifi: ath12k: use CMEM write for PPT on hybrid bus devices Aaradhana Sahu
2026-10-08 10:24 ` [PATCH ath-next 14/17] wifi: ath12k: store and use MSI data per CE and DP interrupt group for QCN6432 Aaradhana Sahu
2026-10-08 10:24 ` [PATCH ath-next 15/17] wifi: ath12k: Derive QMI service instance ID per protection domain Aaradhana Sahu
2026-10-08 10:24 ` [PATCH ath-next 16/17] wifi: ath12k: Resolve userPD ID per device Aaradhana Sahu
2026-10-08 10:43 ` sashiko-bot
2026-10-08 10:24 ` [PATCH ath-next 17/17] wifi: ath12k: Add QCN6432 AHB support Aaradhana Sahu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261008-mpp_bringup-v1-0-2c5797b5e4ac@oss.qualcomm.com \
--to=aaradhana.sahu@oss.qualcomm.com \
--cc=ath12k@lists.infradead.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jjohnson@kernel.org \
--cc=johannes@sipsolutions.net \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_ssreeela@quicinc.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox