On Fri, Oct 09, 2026 at 06:55:56PM +0800, Quchaosheng wrote: > From: Chaosheng Qu > > Convert the Bosch CC770 and Intel AN82527 controller binding from > free-form text to DT schema, and reference the common can-controller.yaml > schema. > > The driver reads one more property than the old text documented: > "bosch,no-comperator-bypass", which is checked at cc770_platform.c:94. > It is documented here so that it can be used. Its spelling is kept as > the driver spells it. > > The interrupt is obtained with platform_get_irq(), so interrupts is > required. The register window is described with the chip select, the > address offset and the size, as the original text and the existing > device trees on the local bus use three cells. The size is usually 0x80. > > unevaluatedProperties is used rather than additionalProperties so that > properties provided by can-controller.yaml, such as termination-gpios, > remain usable. > > Assisted-by: LLM > Signed-off-by: Chaosheng Qu Acked-by: Conor Dooley Acked-by: Conor Dooley pw-bot: not-applicable