On Thu, Oct 08, 2026 at 09:49:07PM +0800, Jisheng Zhang wrote: > On Wed, Oct 07, 2026 at 02:04:05PM +0100, Conor Dooley wrote: > > On Mon, Oct 05, 2026 at 11:19:18PM +0800, Jisheng Zhang wrote: > > > Add the compatible for the UARTs of the Synaptics SL2610, which are > > > compatible with the Synopsys DesignWare APB UART. > > > > > > Signed-off-by: Jisheng Zhang > > > --- > > > > > > since v1: > > > - use sl2610 instead of sl261x > > > - send as a separate patch > > > > > > .../devicetree/bindings/serial/snps-dw-apb-uart.yaml | 12 +++++++++++- > > > 1 file changed, 11 insertions(+), 1 deletion(-) > > > > > > diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml > > > index 664305de4986..a40f2737e71b 100644 > > > --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml > > > +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml > > > @@ -34,7 +34,16 @@ allOf: > > > properties: > > > resets: > > > minItems: 2 > > > - else: > > > + > > > + - if: > > > + not: > > > + properties: > > > + compatible: > > > + contains: > > > + enum: > > > + - starfive,jh7110-uart > > > + - syna,sl2610-uart > > > > Is the number of uart resets on this device variable? > > Yes, some uarts have only 1 reset, while others have two resets. In the future, please mention this so it doesn't look like an oversight. Acked-by: Conor Dooley pw-bot: not-applicable Thanks, Conor. > > > > > > + then: > > > properties: > > > resets: > > > maxItems: 1 > > > @@ -80,6 +89,7 @@ properties: > > > - starfive,jh7100-hsuart > > > - starfive,jh7100-uart > > > - starfive,jh7110-uart > > > + - syna,sl2610-uart > > > - ultrarisc,dp1000-uart > > > - const: snps,dw-apb-uart > > > - const: snps,dw-apb-uart > > > -- > > > 2.53.0 > > > > >