[PATCH net-next v3 0/3] net: phy: motorcomm: Add cable test support for internal YT861x PHYs

[David Yang <mmyangfl@gmail.com>]

The YT921x switches integrate GbE PHYs of the YT861x family (PHY ID
0x01e04281) on the switch-internal MDIO bus exposed by the yt921x DSA
driver. Add a driver entry and TDR cable test support.

v3:
 - add dt-bindings
 - add PHY_IS_INTERNAL
v2: https://lore.kernel.org/r/20261006202352.1616626-1-mmyangfl@gmail.com
 - split into a driver entry patch and a cable test patch
 - update comments and kconfig
 - add yt861x_config_init() and apply the auto sleep setting, restore auto
   sleep when starting the TDR test fails
 - use separate variables for the TDR status
v1: https://lore.kernel.org/r/20261004184246.1260426-1-mmyangfl@gmail.com

David Yang (3):
  dt-bindings: net: motorcomm: Add YT861x PHY compatible
  net: phy: motorcomm: Add driver entry for internal YT861x PHYs
  net: phy: motorcomm: Add cable test support for internal YT861x PHYs

 .../bindings/net/motorcomm,yt8xxx.yaml        |   1 +
 drivers/net/phy/Kconfig                       |   3 +-
 drivers/net/phy/motorcomm.c                   | 152 +++++++++++++++++-
 3 files changed, 153 insertions(+), 3 deletions(-)

-- 
2.53.0