From: Dinh Nguyen <dinguyen@kernel.org>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org
Cc: dinguyen@kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 2/2] arm64: dts: altera: Add support for the Agilex27 platform
Date: Thu, 15 Oct 2026 07:37:00 -0500 [thread overview]
Message-ID: <20261015123700.2137706-2-dinguyen@kernel.org> (raw)
In-Reply-To: <20261015123700.2137706-1-dinguyen@kernel.org>
The Agilex72 platform is being rebranded to Agilex27. The Agilex27 is
exactly the same as the Agilex72. Add the base DTSI and the devkit's
DTS.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v2: leave the agilex72 files
---
arch/arm64/boot/dts/altera/Makefile | 1 +
.../boot/dts/altera/socfpga_agilex27.dtsi | 156 ++++++++++++++++++
.../dts/altera/socfpga_agilex27_socdk.dts | 27 +++
3 files changed, 184 insertions(+)
create mode 100644 arch/arm64/boot/dts/altera/socfpga_agilex27.dtsi
create mode 100644 arch/arm64/boot/dts/altera/socfpga_agilex27_socdk.dts
diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile
index 8f41349103b80..14e260fb16f3b 100644
--- a/arch/arm64/boot/dts/altera/Makefile
+++ b/arch/arm64/boot/dts/altera/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
socfpga_agilex_socdk.dtb \
socfpga_agilex_socdk_emmc.dtb \
socfpga_agilex_socdk_nand.dtb \
+ socfpga_agilex27_socdk.dtb \
socfpga_agilex3_socdk.dtb \
socfpga_agilex5_socdk.dtb \
socfpga_agilex5_socdk_013b.dtb \
diff --git a/arch/arm64/boot/dts/altera/socfpga_agilex27.dtsi b/arch/arm64/boot/dts/altera/socfpga_agilex27.dtsi
new file mode 100644
index 0000000000000..369981fe85e38
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_agilex27.dtsi
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2026, Altera Corporation
+ */
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "altr,socfpga-agilex27";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ atf_reserved: atf@80000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x80000000 0x0 0x100000>;
+ alignment = <0x1000>;
+ no-map;
+ };
+
+ service_reserved: svcbuffer@80100000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x80100000 0x0 0xf00000>;
+ alignment = <0x1000>;
+ no-map;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a520";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x0>;
+ };
+
+ cpu1: cpu@100 {
+ compatible = "arm,cortex-a520";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x100>;
+ };
+
+ cpu2: cpu@200 {
+ compatible = "arm,cortex-a720";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x200>;
+ };
+
+ cpu3: cpu@300 {
+ compatible = "arm,cortex-a720";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x300>;
+ };
+ };
+
+ clocks {
+ uart_clk: uart-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ intc: interrupt-controller@7000000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x7000000 0x0 0x10000>,
+ <0x0 0x7080000 0x0 0x100000>;
+ ranges;
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x40000>;
+
+ its: msi-controller@7040000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x0 0x7040000 0x0 0x20000>;
+ msi-controller;
+ #msi-cells = <1>;
+ };
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+ ranges = <0 0 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ interrupt-parent = <&intc>;
+
+ smmu: iommu@c100000 {
+ compatible = "arm,smmu-v3";
+ reg = <0x0c100000 0x30000>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "gerror", "priq";
+ dma-coherent;
+ #iommu-cells = <1>;
+ };
+
+ ocram: sram@0 {
+ compatible = "mmio-sram";
+ reg = <0x00000000 0x80000>;
+ ranges = <0 0 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ uart0: serial@9038000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x9038000 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@9039000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x9039000 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/altera/socfpga_agilex27_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_agilex27_socdk.dts
new file mode 100644
index 0000000000000..15d331cdeeb47
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_agilex27_socdk.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2026, Altera Corporation
+ */
+#include "socfpga_agilex27.dtsi"
+
+/ {
+ model = "Altera SoCFPGA Agilex27 SoCDK";
+ compatible = "altr,socfpga-agilex27-socdk", "altr,socfpga-agilex27";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--
2.42.0.411.g813d9a9188
next prev parent reply other threads:[~2026-10-15 12:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-15 12:36 [PATCHv2 1/2] dt-bindings: arm: altera: document the Agilex27 platform Dinh Nguyen
2026-10-15 12:37 ` Dinh Nguyen [this message]
2026-10-15 12:48 ` [PATCHv2 2/2] arm64: dts: altera: Add support for " sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261015123700.2137706-2-dinguyen@kernel.org \
--to=dinguyen@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox