Devicetree
 help / color / mirror / Atom feed
From: Srinivas Neeli <srinivas.neeli@amd.com>
To: Nagadheeraj Rottela <nagadheeraj.rottela@amd.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	"Jakub Kicinski" <kuba@kernel.org>,
	Paolo Abeni <pabeni@redhat.com>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Richard Cochran <richardcochran@gmail.com>,
	"Michal Simek" <michal.simek@amd.com>,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	Clark Williams <clrkwllms@kernel.org>,
	"Steven Rostedt" <rostedt@goodmis.org>,
	Eric Dumazet <edumazet@kernel.org>,
	"Eric Dumazet" <edumazet@kernel.org>
Cc: <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-rt-devel@lists.linux.dev>,
	Srinivas Neeli <srinivas.neeli@amd.com>,
	<neelisrinivas18@gmail.com>, <git@amd.com>
Subject: [PATCH net-next v3 8/8] net: xilinx: tsn: deliver endpoint RX frames to DSA user ports
Date: Fri, 16 Oct 2026 15:02:07 +0530	[thread overview]
Message-ID: <20261016-patches_v2_external-v3-8-e33d3960ca1e@amd.com> (raw)
In-Reply-To: <20261016-patches_v2_external-v3-0-e33d3960ca1e@amd.com>

From: Nagadheeraj Rottela <nagadheeraj.rottela@amd.com>

The endpoint MAC is the DSA conduit for the three-port TSN switch. DSA
selects an RX frame's user port from the port metadata on the skb, so a
frame from either MAC needs that metadata to reach its swpN netdev.

Allocate a METADATA_HW_PORT_MUX entry per MAC port at probe and attach it
to each RX frame by its TUSER port_id (1 for MAC1, 2 for MAC2), guarded by
netdev_uses_dsa() so it runs only while a switch is bound as the conduit.

The RX callback runs in softirq and hands the frame to __netif_rx(), which
queues it on the backlog, so the attached dst must be a counted reference
(dst_hold() + skb_dst_set()) to survive the handoff.

Signed-off-by: Nagadheeraj Rottela <nagadheeraj.rottela@amd.com>
Co-developed-by: Srinivas Neeli <srinivas.neeli@amd.com>
Signed-off-by: Srinivas Neeli <srinivas.neeli@amd.com>
---
 drivers/net/ethernet/xilinx/tsn/xilinx_tsn_ep.c | 55 ++++++++++++++++++++++++-
 1 file changed, 54 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/xilinx/tsn/xilinx_tsn_ep.c b/drivers/net/ethernet/xilinx/tsn/xilinx_tsn_ep.c
index bd8cd504cefb..5103a3b4b018 100644
--- a/drivers/net/ethernet/xilinx/tsn/xilinx_tsn_ep.c
+++ b/drivers/net/ethernet/xilinx/tsn/xilinx_tsn_ep.c
@@ -28,6 +28,8 @@
 #include <linux/timer.h>
 #include <linux/types.h>
 
+#include <net/dsa.h>
+#include <net/dst_metadata.h>
 #include <net/netdev_queues.h>
 
 #include "xilinx_tsn.h"
@@ -57,6 +59,9 @@
 #define TSN_TUSER_PORT_MAC1		0x1
 #define TSN_TUSER_PORT_MAC2		0x2
 
+/* Sized to index port_md[] by TUSER port_id (1 or 2, slot 0 unused) */
+#define XLNX_TSN_EP_PORT_MD_SLOTS	(TSN_TUSER_PORT_MAC2 + 1)
+
 /**
  * struct skbuf_dma_descriptor - skb container for each in-flight DMA descriptor
  * @sgl: scatter-gather list backing the DMA mapping
@@ -115,6 +120,8 @@ struct xlnx_tsn_ep_dma_chan {
  * @tx_chans: array of TX channels (size @num_tx_queues)
  * @rx_chans: array of RX channels (size @num_rx_queues)
  * @closing: set in ndo_stop so the RX completion callback stops re-arming
+ * @port_md: per-TUSER-port METADATA_HW_PORT_MUX entries attached on RX,
+ *	indexed by port_id (1 for MAC1, 2 for MAC2)
  */
 struct xlnx_tsn_ep {
 	struct net_device *ndev;
@@ -131,6 +138,8 @@ struct xlnx_tsn_ep {
 	struct xlnx_tsn_ep_dma_chan **rx_chans;
 
 	bool closing;
+
+	struct metadata_dst *port_md[XLNX_TSN_EP_PORT_MD_SLOTS];
 };
 
 static inline struct skbuf_dma_descriptor *
@@ -302,6 +311,10 @@ static void ep_dma_rx_cb(void *data, const struct dmaengine_result *result)
 	}
 
 	skb_put(skb, rx_len);
+	if (netdev_uses_dsa(ndev)) {
+		dst_hold(&ep->port_md[port_id]->dst);
+		skb_dst_set(skb, &ep->port_md[port_id]->dst);
+	}
 	skb->dev = ndev;
 	skb->protocol = eth_type_trans(skb, ndev);
 	skb->ip_summed = CHECKSUM_NONE;
@@ -900,6 +913,37 @@ static int ep_count_dma_channels(struct device *dev, u32 *out_tx, u32 *out_rx,
 	return 0;
 }
 
+static void ep_free_port_md(struct xlnx_tsn_ep *ep)
+{
+	int i;
+
+	for (i = 0; i < XLNX_TSN_EP_PORT_MD_SLOTS; i++) {
+		if (ep->port_md[i]) {
+			dst_release(&ep->port_md[i]->dst);
+			ep->port_md[i] = NULL;
+		}
+	}
+}
+
+static int ep_alloc_port_md(struct xlnx_tsn_ep *ep)
+{
+	int i;
+
+	for (i = TSN_TUSER_PORT_MAC1; i <= TSN_TUSER_PORT_MAC2; i++) {
+		struct metadata_dst *md;
+
+		md = metadata_dst_alloc(0, METADATA_HW_PORT_MUX, GFP_KERNEL);
+		if (!md) {
+			ep_free_port_md(ep);
+			return -ENOMEM;
+		}
+		md->u.port_info.port_id = i;
+		ep->port_md[i] = md;
+	}
+
+	return 0;
+}
+
 static int xlnx_tsn_ep_probe(struct platform_device *pdev)
 {
 	u32 num_tx_dma_channels, num_rx_dma_channels, num_prio;
@@ -985,16 +1029,24 @@ static int xlnx_tsn_ep_probe(struct platform_device *pdev)
 			 ndev->dev_addr);
 	}
 
+	ret = ep_alloc_port_md(ep);
+	if (ret) {
+		dev_err_probe(dev, ret, "failed to allocate per-port metadata\n");
+		goto err_release_chans;
+	}
+
 	platform_set_drvdata(pdev, ep);
 
 	ret = register_netdev(ndev);
 	if (ret) {
 		dev_err_probe(dev, ret, "failed to register net device\n");
-		goto err_release_chans;
+		goto err_free_md;
 	}
 
 	return 0;
 
+err_free_md:
+	ep_free_port_md(ep);
 err_release_chans:
 	ep_release_dma_chans(ep);
 err_free_ndev:
@@ -1010,6 +1062,7 @@ static void xlnx_tsn_ep_remove(struct platform_device *pdev)
 		return;
 
 	unregister_netdev(ep->ndev);
+	ep_free_port_md(ep);
 	ep_release_dma_chans(ep);
 	free_netdev(ep->ndev);
 }

-- 
2.44.4


      parent reply	other threads:[~2026-10-16  9:33 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-16  9:31 [PATCH net-next v3 0/8] Add Xilinx TSN Endpoint Ethernet MAC driver Srinivas Neeli
2026-10-16  9:32 ` [PATCH net-next v3 1/8] dt-bindings: net: add Xilinx TSN Endpoint Ethernet MAC Srinivas Neeli
2026-10-16  9:32 ` [PATCH net-next v3 2/8] net: xilinx: tsn: add TSN endpoint wrapper driver Srinivas Neeli
2026-10-16  9:32 ` [PATCH net-next v3 3/8] net: xilinx: tsn: add endpoint MAC driver skeleton Srinivas Neeli
2026-10-16  9:32 ` [PATCH net-next v3 4/8] net: xilinx: tsn: parse endpoint DMA channel configuration Srinivas Neeli
2026-10-16  9:32 ` [PATCH net-next v3 5/8] net: xilinx: tsn: bring up the endpoint MCDMA channels Srinivas Neeli
2026-10-16  9:32 ` [PATCH net-next v3 6/8] net: xilinx: tsn: add the endpoint RX data path Srinivas Neeli
2026-10-16  9:32 ` [PATCH net-next v3 7/8] net: xilinx: tsn: add the endpoint TX " Srinivas Neeli
2026-10-16  9:32 ` Srinivas Neeli [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261016-patches_v2_external-v3-8-e33d3960ca1e@amd.com \
    --to=srinivas.neeli@amd.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=bigeasy@linutronix.de \
    --cc=clrkwllms@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@kernel.org \
    --cc=git@amd.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rt-devel@lists.linux.dev \
    --cc=michal.simek@amd.com \
    --cc=nagadheeraj.rottela@amd.com \
    --cc=neelisrinivas18@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=richardcochran@gmail.com \
    --cc=robh@kernel.org \
    --cc=rostedt@goodmis.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox