From: Fabio Estevam <festevam@gmail.com>
To: dmitry.torokhov@gmail.com
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
linux-input@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Fabio Estevam <festevam@gmail.com>
Subject: [PATCH] dt-bindings: input: ti,ads7843: Allow SPI clock polarity
Date: Fri, 16 Oct 2026 17:31:31 -0300 [thread overview]
Message-ID: <20261016203131.454640-1-festevam@gmail.com> (raw)
imx27-eukrea-mbimxsd27-baseboard passes 'spi-cpol' in the ads7846
touchscreen node, which causes the following dt-schema warning:
imx27-eukrea-mbimxsd27-baseboard.dtb: ads7846@0 (ti,ads7846):
Unevaluated properties are not allowed (spi-cpol was unexpected)
Allow spi-cpol so the binding describes the existing configuration
without changing its SPI mode.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
.../devicetree/bindings/input/touchscreen/ti,ads7843.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
index 1b58fc263dce..24172d206d6d 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
@@ -32,6 +32,8 @@ properties:
description:
GPIO handle describing the pin the !PENIRQ line is connected to.
+ spi-cpol: true
+
vcc-supply:
description:
A regulator node for the supply voltage.
--
2.43.0
next reply other threads:[~2026-10-16 20:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-16 20:31 Fabio Estevam [this message]
2026-10-16 20:37 ` [PATCH] dt-bindings: input: ti,ads7843: Allow SPI clock polarity sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261016203131.454640-1-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox