[PATCH] dt-bindings: display: Convert hisilicon,hi6220-ade to DT schema

["Rob Herring (Arm)" <robh@kernel.org>]

Convert the hisilicon,hi6220-ade binding to DT schema format. Drop the
assigned-clocks as those are implicit and should never be required.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../bindings/display/hisilicon/hisi-ade.txt   | 64 -------------
 .../hisilicon/hisilicon,hi6220-ade.yaml       | 95 +++++++++++++++++++
 2 files changed, 95 insertions(+), 64 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
 create mode 100644 Documentation/devicetree/bindings/display/hisilicon/hisilicon,hi6220-ade.yaml

diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
deleted file mode 100644
index 305a0e72a900..000000000000
--- a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Device-Tree bindings for hisilicon ADE display controller driver
-
-ADE (Advanced Display Engine) is the display controller which grab image
-data from memory, do composition, do post image processing, generate RGB
-timing stream and transfer to DSI.
-
-Required properties:
-- compatible: value should be "hisilicon,hi6220-ade".
-- reg: physical base address and length of the ADE controller's registers.
-- hisilicon,noc-syscon: ADE NOC QoS syscon.
-- resets: The ADE reset controller node.
-- interrupt: the ldi vblank interrupt number used.
-- clocks: a list of phandle + clock-specifier pairs, one for each entry
-  in clock-names.
-- clock-names: should contain:
-  "clk_ade_core" for the ADE core clock.
-  "clk_codec_jpeg" for the media NOC QoS clock, which use the same clock with
-  jpeg codec.
-  "clk_ade_pix" for the ADE pixel clock.
-- assigned-clocks: Should contain "clk_ade_core" and "clk_codec_jpeg" clocks'
-  phandle + clock-specifier pairs.
-- assigned-clock-rates: clock rates, one for each entry in assigned-clocks.
-  The rate of "clk_ade_core" could be "360000000" or "180000000";
-  The rate of "clk_codec_jpeg" could be or less than "1440000000".
-  These rate values could be configured according to performance and power
-  consumption.
-- port: the output port. This contains one endpoint subnode, with its
-  remote-endpoint set to the phandle of the connected DSI input endpoint.
-  See Documentation/devicetree/bindings/graph.txt for more device graph info.
-
-Optional properties:
-- dma-coherent: Present if dma operations are coherent.
-
-
-A example of HiKey board hi6220 SoC specific DT entry:
-Example:
-
-	ade: ade@f4100000 {
-		compatible = "hisilicon,hi6220-ade";
-		reg = <0x0 0xf4100000 0x0 0x7800>;
-		reg-names = "ade_base";
-		hisilicon,noc-syscon = <&medianoc_ade>;
-		resets = <&media_ctrl MEDIA_ADE>;
-		interrupts = <0 115 4>; /* ldi interrupt */
-
-		clocks = <&media_ctrl HI6220_ADE_CORE>,
-			 <&media_ctrl HI6220_CODEC_JPEG>,
-			 <&media_ctrl HI6220_ADE_PIX_SRC>;
-		/*clock name*/
-		clock-names  = "clk_ade_core",
-			       "clk_codec_jpeg",
-			       "clk_ade_pix";
-
-		assigned-clocks = <&media_ctrl HI6220_ADE_CORE>,
-			<&media_ctrl HI6220_CODEC_JPEG>;
-		assigned-clock-rates = <360000000>, <288000000>;
-		dma-coherent;
-
-		port {
-			ade_out: endpoint {
-				remote-endpoint = <&dsi_in>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisilicon,hi6220-ade.yaml b/Documentation/devicetree/bindings/display/hisilicon/hisilicon,hi6220-ade.yaml
new file mode 100644
index 000000000000..ec3d4b775a88
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/hisilicon/hisilicon,hi6220-ade.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/hisilicon/hisilicon,hi6220-ade.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon ADE Display Controller
+
+maintainers:
+  - Xinliang Liu <z.liuxinliang@hisilicon.com>
+
+description:
+  ADE (Advanced Display Engine) is the display controller which grab image
+  data from memory, do composition, do post image processing, generate RGB
+  timing stream and transfer to DSI.
+
+properties:
+  compatible:
+    const: hisilicon,hi6220-ade
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: ade_base
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: clk_ade_core
+      - const: clk_codec_jpeg
+      - const: clk_ade_pix
+
+  dma-coherent: true
+
+  interrupts:
+    items:
+      - description: LDI vblank interrupt specifier.
+
+  resets:
+    maxItems: 1
+
+  hisilicon,noc-syscon:
+    description: ADE NOC QoS syscon.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Output port containing an endpoint subnode.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - resets
+  - hisilicon,noc-syscon
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/hi6220-clock.h>
+    #include <dt-bindings/reset/hisi,hi6220-resets.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ade@f4100000 {
+            compatible = "hisilicon,hi6220-ade";
+            reg = <0x0 0xf4100000 0x0 0x7800>;
+            reg-names = "ade_base";
+            clocks = <&media_ctrl HI6220_ADE_CORE>,
+                     <&media_ctrl HI6220_CODEC_JPEG>,
+                     <&media_ctrl HI6220_ADE_PIX_SRC>;
+            clock-names = "clk_ade_core", "clk_codec_jpeg", "clk_ade_pix";
+            dma-coherent;
+            interrupts = <0 115 4>;
+            resets = <&media_ctrl MEDIA_ADE>;
+            hisilicon,noc-syscon = <&medianoc_ade>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&dsi_in>;
+                };
+            };
+        };
+    };
-- 
2.53.0