Devicetree
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Fredrik M Olsson <fredriol@axis.com>
Cc: Fredrik M Olsson <fredrik.m.olsson@axis.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90@mail.toshiba>,
	linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, kernel@axis.com
Subject: Re: [PATCH v3] rtc: ds1307: Add driver for Epson RX8901CE
Date: Mon, 19 Oct 2026 22:34:49 +0200	[thread overview]
Message-ID: <202610192034497aeb0da5@mail.local> (raw)
In-Reply-To: <f3fd611b-920f-4539-8edb-ecb173f715b0@axis.com>

Hello,

On 16/10/2026 09:41:14+0200, Fredrik M Olsson wrote:
> On 6/29/26 17:13, Fredrik M Olsson wrote:
> > Adds support for:
> > - Reading and writing time to/from the RTC.
> > - Changing Backup Switch Mode (BSM) to DISABLED/DIRECT/LEVEL using the
> >    RTC_PARAM_SET ioctl.
> > - Optionally enabling battery charging.
> > - Reading the battery voltage low status using the RTC_VL_READ ioctl
> >    (only supported in LEVEL BSM), which also reports invalid time
> >    information if the VLF flag is set.
> > 
> > Signed-off-by: Fredrik M Olsson<fredrik.m.olsson@axis.com>
> > ---
> > Add basic support for the Epson RX8901CE RTC.
> > Datasheet:https://download.epsondevice.com/td/pdf/app/RX8901CE_en.pdf
> > 
> > Also includes a bug fix for an issue with reading the weekday from the
> > RTC which affects both the existing rx8130 and this rx8901 driver.
> > ---
> > Changes in v3:
> > - Clear CHGEN when trickle battery charging is disabled.
> > - Link to v2:https://lore.kernel.org/r/20260520-ds1307-rx8901-add-v2-0-
> > e069ea32e1db@axis.com
> > 
> > Changes in v2:
> > - Squashed the Voltage Low status patch into the driver patch
> > - Switch from dev_err to dev_dbg
> > - Implement Backup Switch Mode (BSM) ioctl instead of hard coding
> >    switching mode.
> > - Change the prototype for the do_trickle_setup function pointer in
> >    order to make it possible to propagate error codes from the added
> >    PWSW_CFG register read operation. This read operation is added so not
> >    to override previously set register fields.
> > - Link to v1:https://lore.kernel.org/r/20251219-ds1307-rx8901-add-v1-0-
> > b13f346ebe93@axis.com
> 
> [...]
> 
> Friendly ping.

This was dropped from the queue because kbuild reported warnings and
smatch issues on the patch.

Also, I feel like this should actually be a separate driver instead of
growing ds1307 larger than it already is.


-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

      reply	other threads:[~2026-10-19 20:34 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-29 15:13 [PATCH v3] rtc: ds1307: Add driver for Epson RX8901CE Fredrik M Olsson
2026-06-29 20:15 ` kernel test robot
2026-06-29 21:10 ` kernel test robot
2026-06-29 21:10 ` kernel test robot
2026-06-30  2:07 ` kernel test robot
2026-10-16  7:41 ` Fredrik M Olsson
2026-10-19 20:34   ` Alexandre Belloni [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=202610192034497aeb0da5@mail.local \
    --to=alexandre.belloni@bootlin.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fredrik.m.olsson@axis.com \
    --cc=fredriol@axis.com \
    --cc=kernel@axis.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=nobuhiro.iwamatsu.x90@mail.toshiba \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox