From: Val Packett <val@packett.cool>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Abel Vesa <abelvesa@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: "Val Packett" <val@packett.cool>,
"Marc Lainez" <marc.lainez@gmail.com>,
"Luca Weiss" <luca.weiss@fairphone.com>,
"Barnabás Czémán" <barnabas.czeman@mainlining.org>,
"Danila Tikhonov" <danila@jiaxyga.com>,
"Sebastian Reichel" <sre@kernel.org>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, phone-devel@vger.kernel.org,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 5/5] arm64: dts: qcom: pmi632: Add battery fuel gauge node
Date: Thu, 12 Nov 2026 14:07:31 -0300 [thread overview]
Message-ID: <20261112170841.2189322-6-val@packett.cool> (raw)
In-Reply-To: <20261112170841.2189322-1-val@packett.cool>
Add a node for the "qgauge" battery fuel gauge at 0x4800, and for the
SDAM region at 0xb100 which contains the full charge capacity.
Signed-off-by: Val Packett <val@packett.cool>
---
arch/arm64/boot/dts/qcom/pmi632.dtsi | 33 ++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi
index 82b5d7b7bb5b..5e9e82563884 100644
--- a/arch/arm64/boot/dts/qcom/pmi632.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi
@@ -163,11 +163,44 @@ pmi632_adc_tm: adc-tm@3500 {
status = "disabled";
};
+ pmi632_qgauge: fuel-gauge@4800 {
+ compatible = "qcom,pmi632-qg";
+
+ reg = <0x4800>;
+
+ interrupts = <0x2 0x48 0x0 IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x48 0x1 IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x48 0x2 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x48 0x3 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x48 0x4 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x48 0x5 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x48 0x6 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "batt-missing",
+ "vbat-low",
+ "vbat-empty",
+ "fifo-done",
+ "good-ocv",
+ "fsm-state-chg",
+ "event";
+
+ nvmem = <&pmi632_sdam_2>;
+
+ status = "disabled";
+ };
+
pmi632_pbs_client3: pbs@7400 {
compatible = "qcom,pmi632-pbs", "qcom,pbs";
reg = <0x7400>;
};
+ pmi632_sdam_2: nvram@b100 {
+ compatible = "qcom,spmi-sdam";
+ reg = <0xb100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xb100 0x100>;
+ };
+
pmi632_sdam_7: nvram@b600 {
compatible = "qcom,spmi-sdam";
reg = <0xb600>;
--
2.56.0
prev parent reply other threads:[~2026-11-12 17:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-12 17:07 [PATCH 0/5] Add driver for Qualcomm QGauge (qcom_qg) fuel gauge Val Packett
2026-11-12 17:07 ` [PATCH 1/5] dt-bindings: power: supply: add Qualcomm QGauge " Val Packett
2026-11-12 17:07 ` [PATCH 2/5] power: supply: add Qualcomm QGauge (qcom_qg) fuel gauge driver Val Packett
2026-11-12 17:07 ` [PATCH 3/5] iio: adc: qcom-spmi-adc5: Add ADC5_BAT_THERM_100K_PU Val Packett
2026-11-12 17:07 ` [PATCH 4/5] arm64: dts: qcom: pmi632: Add missing bat_therm ADC channel Val Packett
2026-11-12 17:07 ` Val Packett [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261112170841.2189322-6-val@packett.cool \
--to=val@packett.cool \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=andy@kernel.org \
--cc=barnabas.czeman@mainlining.org \
--cc=conor+dt@kernel.org \
--cc=danila@jiaxyga.com \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=luca.weiss@fairphone.com \
--cc=marc.lainez@gmail.com \
--cc=nuno.sa@analog.com \
--cc=phone-devel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox