From: Christian Marangi <ansuelsmth@gmail.com>
To: Maxime Chevallier <maxime.chevallier@bootlin.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Simon Horman <horms@kernel.org>, Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
Randy Dunlap <rdunlap@infradead.org>,
Christian Marangi <ansuelsmth@gmail.com>,
Lorenzo Bianconi <lorenzo@kernel.org>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Philipp Zabel <p.zabel@pengutronix.de>,
Nathan Chancellor <nathan@kernel.org>,
Nick Desaulniers <ndesaulniers@google.com>,
Bill Wendling <morbo@google.com>,
Justin Stitt <justinstitt@google.com>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, llvm@lists.linux.dev
Subject: [PATCH net-next v19 06/15] net: phylink: make phylink_validate state locked
Date: Fri, 13 Nov 2026 01:31:56 +0100 [thread overview]
Message-ID: <20261113003217.197757-7-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20261113003217.197757-1-ansuelsmth@gmail.com>
In preparation for support for PCS release/late attach, rework the
phylink_validate functions to be locked under the state mutex.
With the introduction of a notifier that can be called concurrently while a
phylink_create is called or an interface mode validation is being run, on
recalculating the supported interface and capabilities, an inconsistency
can be introduced with 2 validation run at the same time.
To handle this, make the phylink_validate lock under the phylink state
mutex, add lockless variant for phylink_validate_mask and phylink_validate
and add lockdep check to make sure the mutex is held in the inner
validate functions.
Function that already run phylink_validate under state mutex, are updated
to use the lockless variant.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/net/phy/phylink.c | 47 +++++++++++++++++++++++++++++++++------
1 file changed, 40 insertions(+), 7 deletions(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index e2e0b313fd61..918aa95e5a64 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -9,6 +9,7 @@
#include <linux/ethtool.h>
#include <linux/export.h>
#include <linux/gpio/consumer.h>
+#include <linux/lockdep.h>
#include <linux/netdevice.h>
#include <linux/of.h>
#include <linux/of_mdio.h>
@@ -550,6 +551,8 @@ static int phylink_validate_mac_and_pcs(struct phylink *pl,
unsigned long capabilities;
int ret;
+ lockdep_assert_held(&pl->state_mutex);
+
/* Get the PCS for this interface mode */
if (pl->mac_ops->mac_select_pcs) {
pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface);
@@ -628,6 +631,8 @@ static void phylink_validate_one(struct phylink *pl, struct phy_device *phy,
__ETHTOOL_DECLARE_LINK_MODE_MASK(tmp_supported);
struct phylink_link_state tmp_state;
+ lockdep_assert_held(&pl->state_mutex);
+
linkmode_copy(tmp_supported, supported);
tmp_state = *state;
@@ -648,15 +653,17 @@ static void phylink_validate_one(struct phylink *pl, struct phy_device *phy,
}
}
-static int phylink_validate_mask(struct phylink *pl, struct phy_device *phy,
- unsigned long *supported,
- struct phylink_link_state *state,
- const unsigned long *interfaces)
+static int __phylink_validate_mask(struct phylink *pl, struct phy_device *phy,
+ unsigned long *supported,
+ struct phylink_link_state *state,
+ const unsigned long *interfaces)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(all_adv) = { 0, };
__ETHTOOL_DECLARE_LINK_MODE_MASK(all_s) = { 0, };
int interface;
+ lockdep_assert_held(&pl->state_mutex);
+
for_each_set_bit(interface, interfaces, PHY_INTERFACE_MODE_MAX)
phylink_validate_one(pl, phy, supported, state, interface,
all_s, all_adv);
@@ -667,8 +674,22 @@ static int phylink_validate_mask(struct phylink *pl, struct phy_device *phy,
return phylink_is_empty_linkmode(supported) ? -EINVAL : 0;
}
-static int phylink_validate(struct phylink *pl, unsigned long *supported,
- struct phylink_link_state *state)
+static int phylink_validate_mask(struct phylink *pl, struct phy_device *phy,
+ unsigned long *supported,
+ struct phylink_link_state *state,
+ const unsigned long *interfaces)
+{
+ int ret;
+
+ mutex_lock(&pl->state_mutex);
+ ret = __phylink_validate_mask(pl, phy, supported, state, interfaces);
+ mutex_unlock(&pl->state_mutex);
+
+ return ret;
+}
+
+static int __phylink_validate(struct phylink *pl, unsigned long *supported,
+ struct phylink_link_state *state)
{
const unsigned long *interfaces = pl->supported_interfaces;
@@ -682,6 +703,18 @@ static int phylink_validate(struct phylink *pl, unsigned long *supported,
return phylink_validate_mac_and_pcs(pl, supported, state);
}
+static int phylink_validate(struct phylink *pl, unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ int ret;
+
+ mutex_lock(&pl->state_mutex);
+ ret = __phylink_validate(pl, supported, state);
+ mutex_unlock(&pl->state_mutex);
+
+ return ret;
+}
+
static void phylink_fill_fixedlink_supported(unsigned long *supported)
{
linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported);
@@ -2117,7 +2150,7 @@ void phylink_update_mac_pause_capabilities(struct phylink *pl, unsigned long mac
else if (pl->sfp_bus)
linkmode_and(pl->supported, pl->supported, pl->sfp_support);
- phylink_validate(pl, pl->supported, config);
+ __phylink_validate(pl, pl->supported, config);
pause_state = config->pause;
--
2.55.0
next prev parent reply other threads:[~2026-11-13 0:32 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-13 0:31 [PATCH net-next v19 00/15] net: pcs: Introduce support for fwnode PCS Christian Marangi
2026-11-13 0:31 ` [PATCH net-next v19 01/15] net: phylink: keep and use MAC supported_interfaces in phylink struct Christian Marangi
2026-11-13 0:31 ` [PATCH net-next v19 02/15] net: phylink: make PCS phylink instance access RCU protected Christian Marangi
2026-11-13 0:31 ` [PATCH net-next v19 03/15] net: phylink: introduce internal phylink PCS handling Christian Marangi
2026-11-13 0:31 ` [PATCH net-next v19 04/15] net: pcs: implement Firmware node support for PCS driver Christian Marangi
2026-11-13 0:31 ` [PATCH net-next v19 05/15] net: phylink: save phylink instance fwnode on phylink_create Christian Marangi
2026-11-13 0:31 ` Christian Marangi [this message]
2026-11-13 0:31 ` [PATCH net-next v19 07/15] net: phylink: add capabilities helper and track modified advertising Christian Marangi
2026-11-13 0:31 ` [PATCH net-next v19 08/15] net: phylink: support PCS provider release Christian Marangi
2026-11-13 0:31 ` [PATCH net-next v19 09/15] net: phylink: support late PCS provider attach Christian Marangi
2026-11-13 0:32 ` [PATCH net-next v19 10/15] net: Document PCS subsystem Christian Marangi
2026-11-13 0:32 ` [PATCH net-next v19 11/15] MAINTAINERS: add myself as PCS subsystem maintainer Christian Marangi
2026-11-13 0:32 ` [PATCH net-next v19 12/15] net: phylink: add .pcs_link_down PCS OP Christian Marangi
2026-11-13 0:32 ` [PATCH net-next v19 13/15] dt-bindings: net: pcs: Document support for Airoha Ethernet PCS Christian Marangi
2026-11-13 0:32 ` [PATCH net-next v19 14/15] net: pcs: airoha: add PCS driver for Airoha AN7581 SoC Christian Marangi
2026-11-13 0:32 ` [PATCH net-next v19 15/15] net: airoha: add phylink support Christian Marangi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261113003217.197757-7-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@kernel.org \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=justinstitt@google.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=llvm@lists.linux.dev \
--cc=lorenzo@kernel.org \
--cc=maxime.chevallier@bootlin.com \
--cc=morbo@google.com \
--cc=nathan@kernel.org \
--cc=ndesaulniers@google.com \
--cc=netdev@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=rdunlap@infradead.org \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox