From: Chrispine Tinega <dev@chrispinetinega.com>
To: Lee Jones <lee@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Andreas Kemnade <andreas@kemnade.info>,
Kevin Hilman <khilman@baylibre.com>,
Roger Quadros <rogerq@kernel.org>,
Tony Lindgren <tony@atomide.com>,
Jerome Neanne <jerome.neanne@baylibre.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-omap@vger.kernel.org, mfd@lists.linux.dev
Subject: [PATCH 3/3] mfd: tps65219: Keep running past the warm threshold when asked
Date: Sat, 14 Nov 2026 06:24:56 +0300 [thread overview]
Message-ID: <20261114032457.3434248-4-dev@chrispinetinega.com> (raw)
In-Reply-To: <20261114032457.3434248-1-dev@chrispinetinega.com>
When the devicetree sets ti,no-warm-shutdown on a TPS65219, set the
four SENSOR_x_WARM_MASK bits in MASK_CONFIG at probe. The PMIC then
reports a warm die instead of powering the board down, and powers off
only at its hot threshold.
The masks are loaded from the PMIC's NVM at every power-up, so they are
set on every probe.
Signed-off-by: Chrispine Tinega <dev@chrispinetinega.com>
---
drivers/mfd/tps65219.c | 15 +++++++++++++++
include/linux/mfd/tps65219.h | 6 +++++-
2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/tps65219.c b/drivers/mfd/tps65219.c
index e52fbf148..d8e352f35 100644
--- a/drivers/mfd/tps65219.c
+++ b/drivers/mfd/tps65219.c
@@ -507,6 +507,21 @@ static int tps65219_probe(struct i2c_client *client)
}
}
+ /*
+ * The warm masks are loaded from NVM at every power-up, so they are set
+ * again on every probe. With a sensor unmasked, the PMIC powers down at
+ * the warm threshold; with all masked, only at the hot threshold.
+ */
+ if (chip_id == TPS65219 &&
+ of_property_read_bool(tps->dev->of_node, "ti,no-warm-shutdown")) {
+ ret = regmap_set_bits(tps->regmap, TPS65219_REG_MASK_CONFIG,
+ TPS65219_REG_MASK_SENSOR_WARM_MASK);
+ if (ret) {
+ dev_err(tps->dev, "Failed to mask warm shutdown: %d\n", ret);
+ return ret;
+ }
+ }
+
ret = devm_regmap_add_irq_chip(tps->dev, tps->regmap, client->irq,
IRQF_ONESHOT, 0, pmic->irq_chip,
&tps->irq_data);
diff --git a/include/linux/mfd/tps65219.h b/include/linux/mfd/tps65219.h
index 5a6be84e2..688173044 100644
--- a/include/linux/mfd/tps65219.h
+++ b/include/linux/mfd/tps65219.h
@@ -196,7 +196,11 @@ enum pmic_id {
#define TPS65219_REG_MASK_UV_BUCK3_UV_MASK BIT(6)
#define TPS65219_REG_MASK_UV_RETRY_MASK BIT(7)
/* MASK Config */
-// SENSOR_N_WARM_MASK already defined in Thermal
+#define TPS65219_REG_MASK_SENSOR_3_WARM_MASK BIT(0)
+#define TPS65219_REG_MASK_SENSOR_2_WARM_MASK BIT(1)
+#define TPS65219_REG_MASK_SENSOR_1_WARM_MASK BIT(2)
+#define TPS65219_REG_MASK_SENSOR_0_WARM_MASK BIT(3)
+#define TPS65219_REG_MASK_SENSOR_WARM_MASK GENMASK(3, 0)
#define TPS65219_REG_MASK_INT_FOR_RV_MASK BIT(4)
#define TPS65219_REG_MASK_EFFECT_MASK GENMASK(6, 5)
#define TPS65219_REG_MASK_INT_FOR_PB_MASK BIT(7)
--
2.53.0
prev parent reply other threads:[~2026-11-14 3:26 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-14 3:24 [PATCH 0/3] mfd: tps65219: Let a board run past the warm threshold Chrispine Tinega
2026-11-14 3:24 ` [PATCH 1/3] mfd: tps65219: Correct the MASK_EFFECT field of MASK_CONFIG Chrispine Tinega
2026-11-14 3:29 ` sashiko-bot
2026-11-14 3:24 ` [PATCH 2/3] regulator: dt-bindings: ti,tps65219: Add ti,no-warm-shutdown Chrispine Tinega
2026-11-14 3:24 ` Chrispine Tinega [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261114032457.3434248-4-dev@chrispinetinega.com \
--to=dev@chrispinetinega.com \
--cc=aaro.koskinen@iki.fi \
--cc=andreas@kemnade.info \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jerome.neanne@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mfd@lists.linux.dev \
--cc=robh@kernel.org \
--cc=rogerq@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox