Devicetree
 help / color / mirror / Atom feed
From: "Adil Hüsrev Tepe" <tadilhusrev@gmail.com>
To: Neil Armstrong <neil.armstrong@linaro.org>,
	Jessica Zhang <jesszhan0024@gmail.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: "David Airlie" <airlied@gmail.com>,
	"Simona Vetter" <simona@ffwll.ch>,
	"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
	"Maxime Ripard" <mripard@kernel.org>,
	"Thomas Zimmermann" <tzimmermann@suse.de>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Adil Hüsrev Tepe" <tadilhusrev@gmail.com>
Subject: [PATCH v1 0/2] drm/panel: add Novatek NT36525 (Samsung Galaxy XCover5)
Date: Mon, 16 Nov 2026 10:02:10 +0300	[thread overview]
Message-ID: <20261116070212.314228-1-tadilhusrev@gmail.com> (raw)

This series adds a DRM panel driver and its DT binding for MIPI-DSI
video-mode panels based on the Novatek NT36525 controller, as fitted on
the Samsung Galaxy XCover5 (SM-G525F, Exynos850). The panel is 720x1480,
uses an active-high reset (RESX), and a DCS init sequence that mirrors
the stock Samsung bring-up. Backlight goes through drm_panel_of_backlight().

  Patch 1  dt-bindings (compatible: "samsung,xcover5-nt36525",
           "novatek,nt36525")
  Patch 2  the panel driver

Tested on a Samsung Galaxy XCover5 running 7.4-rc1 plus this series: the
panel initialises and displays correctly under phosh. checkpatch.pl and
dt_binding_check are clean (bar the usual new-file MAINTAINERS note; the
files are covered by the DRM PANEL DRIVERS wildcards).

Based on v7.4-rc1.

Tool usage
----------
This series was developed during XCover5 mainline bring-up with the help
of an AI coding assistant (Claude Code, Anthropic). The assistant converted
the vendor init stream to mipi_dsi_dcs_write_seq_multi(), drafted the driver
skeleton and the DT binding, and drafted these changelogs. I reviewed every
line, validated the binding (dt_binding_check, yamllint), tested the driver
on hardware, and take full responsibility for the contribution.
Prompt summary: "convert the XCover5 NT36525 vendor panel init into a
mainline drm_panel driver plus DT binding; keep it checkpatch- and
dt_binding_check-clean; test on the device." Review comments are welcome
and I will answer them myself.

Adil Hüsrev Tepe (2):
  dt-bindings: display: panel: add Novatek NT36525
  drm/panel: add Novatek NT36525 panel driver

 .../display/panel/novatek,nt36525.yaml        |  71 +++
 drivers/gpu/drm/panel/Kconfig                 |  13 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 drivers/gpu/drm/panel/panel-novatek-nt36525.c | 486 ++++++++++++++++++
 4 files changed, 571 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/novatek,nt36525.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt36525.c

-- 
2.53.0


             reply	other threads:[~2026-11-16  7:02 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-16  7:02 Adil Hüsrev Tepe [this message]
2026-11-16  7:02 ` [PATCH v1 1/2] dt-bindings: display: panel: add Novatek NT36525 Adil Hüsrev Tepe
2026-11-16  7:14   ` sashiko-bot
2026-11-16  7:02 ` [PATCH v1 2/2] drm/panel: add Novatek NT36525 panel driver Adil Hüsrev Tepe
2026-11-16  7:22   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261116070212.314228-1-tadilhusrev@gmail.com \
    --to=tadilhusrev@gmail.com \
    --cc=airlied@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jesszhan0024@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox