From: John Crispin <john@phrozen.org>
To: Lorenzo Bianconi <lorenzo@kernel.org>, Lee Jones <lee@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Linus Walleij <linusw@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>
Cc: Ahmed Naseef <naseefkm@gmail.com>,
Benjamin Larsson <benjamin.larsson@genexis.eu>,
Christian Marangi <ansuelsmth@gmail.com>,
devicetree@vger.kernel.org, lei.dong@airoha.com,
Linqi.zhang@airoha.com, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
mfd@lists.linux.dev,
Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>,
Rajeev.kumar@airoha.com, upstream@airoha.com,
Weifeng.xu@airoha.com, zhengping.zhang@airoha.com
Subject: [PATCH v3 0/9] pinctrl: airoha: add AN7589 support
Date: Mon, 16 Nov 2026 18:48:45 +0100 [thread overview]
Message-ID: <20261116174854.342912-1-john@phrozen.org> (raw)
The Airoha AN7589 has a GPIO controller like the EN7581 one, with a
third bank for 74 GPIOs in total. Its pin functions are selected
differently: a separate IOMUX block holds a 4 bit mode field per pin,
eight pins per register, and mode 0 makes any pin a GPIO.
The first four patches prepare the shared driver and change nothing
for the SoCs it serves today:
1. The GPIO register layout moves into the match data, so a SoC can
describe more than 64 pins.
2. A function group can carry one IOMUX mode per pin. A SoC
describes its IOMUX in the match data: the width of the mode
field and, from patch 4, the mode that makes a pin a GPIO.
3. The chip SCU becomes optional, as the AN7589 needs none.
4. A pin requested by gpiolib is put into GPIO mode through the
IOMUX, so no per pin gpio function is needed.
Patch 5 adds the IOMUX to the syscon compatibles. Patch 6 adds the
binding for the pin controller. Patch 7 adds the binding for the GPIO
system controller it sits under, which also holds the PWM controller.
Patch 8 moves the GPIO register offsets to the common header, so the
AN7589 data can describe its own register table, with no functional
change. Patch 9 adds the AN7589 pin data.
The series applies to next-20261105 and has no dependencies.
Changes in v3:
- Split the bindings in three: the syscon compatible (patch 5), the
pin controller (patch 6) and the GPIO system controller (patch 7)
(Lee, Conor).
- Patch 6: allow one group per node, except for pcm_spi and pcie,
whose groups carry different signals of one device. Fix the uart5
example (Conor).
- Patch 7: name the PWM controller in the commit message (Conor).
- Add the Reviewed-by of Lorenzo to patches 3 and 9.
- Link to v2: https://lore.kernel.org/r/20261112185941.1316112-1-john@phrozen.org
Changes in v2:
- Patch 3: look up the airoha,chip-scu phandle before the check for
a chip SCU compatible (Lorenzo).
- Patch 6: one function per block type (uart, i2c, spi, pcm, mdio,
pcie, pon, sgpio, jtag), with the group selecting the instance, as
in the other Airoha pin controller bindings. List the valid groups
for the groups property (Conor).
- Patch 9: the function table follows the binding. Name the match
data, the OF match table and the platform driver after the AN7589
(Lorenzo).
- Link to v1: https://lore.kernel.org/r/20261110173941.301478-1-john@phrozen.org
John Crispin (9):
pinctrl: airoha: make gpio register layout per SoC
pinctrl: airoha: add per pin mode field mux
pinctrl: airoha: make the chip SCU optional
pinctrl: airoha: mux a requested GPIO through the IOMUX
dt-bindings: mfd: syscon: add airoha,an7589-iomux
dt-bindings: pinctrl: airoha: add AN7589
dt-bindings: mfd: airoha: add AN7589 GPIO system controller
pinctrl: airoha: move the GPIO register offsets to the common header
pinctrl: airoha: add support of an7589 SoC
.../mfd/airoha,an7589-gpio-sysctl.yaml | 66 ++
.../devicetree/bindings/mfd/syscon.yaml | 1 +
.../pinctrl/airoha,an7589-pinctrl.yaml | 355 ++++++++++
MAINTAINERS | 3 +
drivers/pinctrl/airoha/Kconfig | 11 +
drivers/pinctrl/airoha/Makefile | 1 +
drivers/pinctrl/airoha/airoha-common.h | 41 +-
drivers/pinctrl/airoha/pinctrl-airoha.c | 119 +++-
drivers/pinctrl/airoha/pinctrl-an7563.c | 1 +
drivers/pinctrl/airoha/pinctrl-an7581.c | 1 +
drivers/pinctrl/airoha/pinctrl-an7583.c | 1 +
drivers/pinctrl/airoha/pinctrl-an7589.c | 623 ++++++++++++++++++
drivers/pinctrl/airoha/pinctrl-en7523.c | 1 +
drivers/pinctrl/airoha/pinctrl-en7528.c | 1 +
14 files changed, 1193 insertions(+), 32 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/airoha,an7589-gpio-sysctl.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/airoha,an7589-pinctrl.yaml
create mode 100644 drivers/pinctrl/airoha/pinctrl-an7589.c
base-commit: ddfe51b0a0f5dc9e415cc2c8ad8db17532dd426b
--
2.34.1
next reply other threads:[~2026-11-16 17:49 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 17:48 John Crispin [this message]
2026-11-16 17:48 ` [PATCH v3 1/9] pinctrl: airoha: make gpio register layout per SoC John Crispin
2026-11-16 17:48 ` [PATCH v3 2/9] pinctrl: airoha: add per pin mode field mux John Crispin
2026-11-16 17:48 ` [PATCH v3 3/9] pinctrl: airoha: make the chip SCU optional John Crispin
2026-11-16 17:48 ` [PATCH v3 4/9] pinctrl: airoha: mux a requested GPIO through the IOMUX John Crispin
2026-11-16 17:48 ` [PATCH v3 5/9] dt-bindings: mfd: syscon: add airoha,an7589-iomux John Crispin
2026-11-16 17:48 ` [PATCH v3 6/9] dt-bindings: pinctrl: airoha: add AN7589 John Crispin
2026-11-16 17:48 ` [PATCH v3 7/9] dt-bindings: mfd: airoha: add AN7589 GPIO system controller John Crispin
2026-11-16 17:48 ` [PATCH v3 8/9] pinctrl: airoha: move the GPIO register offsets to the common header John Crispin
2026-11-16 17:48 ` [PATCH v3 9/9] pinctrl: airoha: add support of an7589 SoC John Crispin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116174854.342912-1-john@phrozen.org \
--to=john@phrozen.org \
--cc=Linqi.zhang@airoha.com \
--cc=Rajeev.kumar@airoha.com \
--cc=Weifeng.xu@airoha.com \
--cc=ansuelsmth@gmail.com \
--cc=benjamin.larsson@genexis.eu \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=lei.dong@airoha.com \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=lorenzo@kernel.org \
--cc=mfd@lists.linux.dev \
--cc=mikhail.kshevetskiy@iopsys.eu \
--cc=naseefkm@gmail.com \
--cc=robh@kernel.org \
--cc=upstream@airoha.com \
--cc=zhengping.zhang@airoha.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox