From: Svyatoslav Ryhel <clamor95@gmail.com>
To: "Hans de Goede" <hansg@kernel.org>,
"Andi Shyti" <andi.shyti@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Svyatoslav Ryhel" <clamor95@gmail.com>,
"Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v1 1/2] dt-bindings: i2c: Document ASUS Transformer's Dock
Date: Wed, 18 Nov 2026 15:45:46 +0200 [thread overview]
Message-ID: <20261118134555.195479-2-clamor95@gmail.com> (raw)
In-Reply-To: <20261118134555.195479-1-clamor95@gmail.com>
Document a hardware configuration that uses a GPIO signal to determine the
presence and state of devices on the bus, allowing the system to
dynamically configure a predetermined set of I2C devices as they are
plugged in or removed used in Tegra based ASUS Transformers.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
.../bindings/i2c/asus,transformer-dock.yaml | 56 +++++++++++++++++++
1 file changed, 56 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/asus,transformer-dock.yaml
diff --git a/Documentation/devicetree/bindings/i2c/asus,transformer-dock.yaml b/Documentation/devicetree/bindings/i2c/asus,transformer-dock.yaml
new file mode 100644
index 0000000000000..5f4a40539c2b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/asus,transformer-dock.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/asus,transformer-dock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASUS Transformer's Dock for Tegra based devices
+
+maintainers:
+ - Michał Mirosław <mirq-linux@rere.qmqm.pl>
+ - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description: An I2C bus extension found in the ASUS Transformers, where
+ certain devices are hot-pluggable, with their presence indicated by a
+ GPIO line. The set of potential hot-pluggable devices must be predefined
+ and fixed.
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml
+
+properties:
+ compatible:
+ const: asus,transformer-dock
+
+ detect-gpios:
+ description:
+ A pin whose active state indicates that detachable devices are plugged in.
+ maxItems: 1
+
+ i2c-parent:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ The phandle of the I2C bus that this multiplexer's master-side port is
+ connected to.
+
+required:
+ - compatible
+ - detect-gpios
+ - i2c-parent
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c-dock {
+ compatible = "asus,transformer-dock";
+
+ detect-gpios = <&gpio 164 GPIO_ACTIVE_LOW>;
+ i2c-parent = <&gen2_i2c>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+...
--
2.53.0
next prev parent reply other threads:[~2026-11-18 13:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 13:45 [PATCH v1 0/2] platform/asus: Add driver for ASUS Transformer's Dock Svyatoslav Ryhel
2026-11-18 13:45 ` Svyatoslav Ryhel [this message]
2026-11-18 13:45 ` [PATCH v1 2/2] platform/asus: Add driver for ASUS Transformer's Dock of Tegra based devices Svyatoslav Ryhel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261118134555.195479-2-clamor95@gmail.com \
--to=clamor95@gmail.com \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hansg@kernel.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=krzk+dt@kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mirq-linux@rere.qmqm.pl \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox