From: Ben Levinsky <ben.levinsky@amd.com>
To: Mathieu Poirier <mathieu.poirier@linaro.org>,
Bjorn Andersson <andersson@kernel.org>,
Jassi Brar <jassisinghbrar@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: <michal.simek@amd.com>, <tanmay.shah@amd.com>,
<ben.levinsky@amd.com>, <linux-remoteproc@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 0/4] Add AMD PL Mailbox and RPMsg support for the AMD BRAM remoteproc
Date: Thu, 19 Nov 2026 14:04:01 -0800 [thread overview]
Message-ID: <20261119220405.2838553-1-ben.levinsky@amd.com> (raw)
This series adds a driver for the AMD PL Mailbox soft IP and uses it to
add RPMsg support to the AMD MicroBlaze/V BRAM remoteproc driver.
Patches 1-2 add the PL Mailbox binding and driver, and patches 3-4 add
RPMsg resources to the BRAM remoteproc binding and driver.
Claude (claude-opus-5.5) was used to help write the code and changelogs,
as indicated by the Assisted-by tags.
Tested on a VEK385 board with the series applied to a 6.18 based AMD
vendor kernel: RPMsg echo with bursts of 64 messages, over five remote
processor start/stop cycles, with two MicroBlaze V designs.
Changes in v3:
- Drop "remoteproc: amd_mbv_bram: Bound device name formatting". The
name is already bounded by rproc_mem_entry_init() and a DT node name
can't contain '%', so there was nothing to fix.
- Drop "remoteproc: amd_mbv_bram: Restore reset GPIO direction after PL
reconfig". The problem only shows when the PL is reprogrammed while
the devices it contains are still bound, which isn't a supported flow.
- dt-bindings: mailbox: Reword the description, which no longer refers
to a "register aperture" or "processor-facing interfaces".
- remoteproc: amd_mbv_bram: Add RPMsg support:
- Reject memory regions above 4 GiB, since the remote uses the
physical address as device address.
- Validate all memory regions before registering any carveout.
v2: https://lore.kernel.org/r/20261105051902.1646651-1-ben.levinsky@amd.com
v1: https://lore.kernel.org/r/20261014213426.2957480-1-ben.levinsky@amd.com
Ben Levinsky (4):
dt-bindings: mailbox: Add AMD PL Mailbox IP
mailbox: Add AMD PL Mailbox soft IP controller
dt-bindings: remoteproc: Add RPMsg resources to AMD BRAM rproc
remoteproc: amd_mbv_bram: Add RPMsg support
.../bindings/mailbox/amd,pl-mailbox-2.1.yaml | 71 ++++
.../bindings/remoteproc/amd,bram-rproc.yaml | 21 +
MAINTAINERS | 7 +
drivers/mailbox/Kconfig | 11 +
drivers/mailbox/Makefile | 1 +
drivers/mailbox/amd-pl-mailbox.c | 378 ++++++++++++++++++
drivers/remoteproc/Kconfig | 5 +
drivers/remoteproc/amd_mbv_bram_rproc.c | 295 +++++++++++++-
8 files changed, 788 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/mailbox/amd,pl-mailbox-2.1.yaml
create mode 100644 drivers/mailbox/amd-pl-mailbox.c
base-commit: f1715c0c04606ebbe832cc760abf49dfd6f2ae1f
--
2.34.1
next reply other threads:[~2026-11-19 22:04 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 22:04 Ben Levinsky [this message]
2026-11-19 22:04 ` [PATCH v3 1/4] dt-bindings: mailbox: Add AMD PL Mailbox IP Ben Levinsky
2026-11-19 22:04 ` [PATCH v3 2/4] mailbox: Add AMD PL Mailbox soft IP controller Ben Levinsky
2026-11-19 22:18 ` sashiko-bot
2026-11-19 22:04 ` [PATCH v3 3/4] dt-bindings: remoteproc: Add RPMsg resources to AMD BRAM rproc Ben Levinsky
2026-11-19 22:04 ` [PATCH v3 4/4] remoteproc: amd_mbv_bram: Add RPMsg support Ben Levinsky
2026-11-19 22:19 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261119220405.2838553-1-ben.levinsky@amd.com \
--to=ben.levinsky@amd.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jassisinghbrar@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=michal.simek@amd.com \
--cc=robh@kernel.org \
--cc=tanmay.shah@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox