From: Conor Dooley <conor@kernel.org>
To: ilyas.nhasse@skf.com
Cc: "Nuno Sá" <nuno.sa@analog.com>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Marcelo Schmitt" <marcelo.schmitt@analog.com>,
linux@analog.com, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] dt-bindings: iio: adc: adi,ad7124: make interrupts optional
Date: Fri, 20 Nov 2026 17:46:10 +0000 [thread overview]
Message-ID: <20261120-deflator-purifier-c746b2f9bba6@spud> (raw)
In-Reply-To: <20261120-ad7124-no-irq-v1-1-7826c5c3fd25@skf.com>
[-- Attachment #1: Type: text/plain, Size: 1421 bytes --]
On Fri, Nov 20, 2026 at 12:26:47PM +0100, ILYAS NHASSE via B4 Relay wrote:
> From: ILYAS NHASSE <ilyas.nhasse@skf.com>
>
> The AD7124 signals the end of a conversion on its DOUT/RDY pin, which is
> also the SPI MISO line. Using it as an interrupt requires the board to
> route that pin to an interrupt-capable input as well, which is not always
> possible, e.g. when the ADC sits behind a digital isolator that only
> carries the SPI signals.
What does this actually mean? Does the isolator only permit data
transmission when CS is active?
>
> The end of a conversion can also be read from the RDY bit of the status
> register, so the interrupt is not needed to operate the device. Drop it
> from the required properties.
>
> Signed-off-by: ILYAS NHASSE <ilyas.nhasse@skf.com>
> ---
> Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
> index 2e3f84db6..875f46477 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
> @@ -76,7 +76,6 @@ properties:
> required:
> - compatible
> - reg
> - - interrupts
>
> # Can't have both clock input and output at the same time.
> not:
>
> --
> 2.43.0
>
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2026-11-20 17:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 11:26 [PATCH 0/2] iio: adc: ad7124: support boards without RDY interrupt ILYAS NHASSE via B4 Relay
2026-11-20 11:26 ` [PATCH 1/2] dt-bindings: iio: adc: adi,ad7124: make interrupts optional ILYAS NHASSE via B4 Relay
2026-11-20 17:46 ` Conor Dooley [this message]
2026-11-20 11:26 ` [PATCH 2/2] iio: adc: ad_sigma_delta: support devices without RDY interrupt ILYAS NHASSE via B4 Relay
2026-11-20 11:45 ` sashiko-bot
2026-11-20 12:24 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120-deflator-purifier-c746b2f9bba6@spud \
--to=conor@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=ilyas.nhasse@skf.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@analog.com \
--cc=marcelo.schmitt@analog.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox