Devicetree
 help / color / mirror / Atom feed
From: Ivan Pfarher via B4 Relay <devnull+ipfarher.gmail.com@kernel.org>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Chen-Yu Tsai <wens@kernel.org>,
	 Jernej Skrabec <jernej.skrabec@gmail.com>,
	 Samuel Holland <samuel@sholland.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	 linux-sunxi@lists.linux.dev, Ivan Pfarher <ipfarher@gmail.com>
Subject: [PATCH 1/4] arm64: dts: allwinner: h5: orangepi-zero-plus2: Add LPO clock for AP6212
Date: Fri, 20 Nov 2026 12:40:45 +0100	[thread overview]
Message-ID: <20261120-orangepi-zero-plus2-fixes-v1-1-ecd792189f27@gmail.com> (raw)
In-Reply-To: <20261120-orangepi-zero-plus2-fixes-v1-0-ecd792189f27@gmail.com>

From: Ivan Pfarher <ipfarher@gmail.com>

The AP6212 WiFi/BT module needs a 32.768 kHz low power oscillator (LPO)
clock, which on this board comes from the RTC clock output (osc32k-out).
Nothing in the device tree references that clock, so it is disabled as
unused during late boot.

WiFi keeps working without it, but the Bluetooth core does not: with the
LPO gated, the BCM43430A1 ROM answers HCI_Reset and nothing else (no
Read Local Version, no firmware download), so the controller can never
be brought up. Turning the clock output on by hand (RTC LOSC_OUT_GATING)
makes the controller answer normally.

Reference the clock from the WiFi power sequence, as other boards using
the same module do (e.g. sun8i-h2-plus-bananapi-m2-zero.dts).

Tested on an Orange Pi Zero Plus2 (H5) running Linux 6.6.160 with this
change applied: osc32k-out stays enabled and the Bluetooth controller
answers HCI commands. Build-tested only against current mainline.

This problem was investigated, and the patch drafted, in an interactive
session with an AI coding assistant (Claude by Anthropic). The submitter
reviewed the change and ran the tests described above.

Fixes: cf8e19e1ec15 ("arm64: dts: orange-pi-zero-plus2: enable AP6212a WiFi/BT combo")
Signed-off-by: Ivan Pfarher <ipfarher@gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index 3eb986c35..34d6c1468 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -5,6 +5,7 @@
 
 #include "sun50i-h5.dtsi"
 
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -54,6 +55,8 @@
 
 	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
 		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
 		post-power-on-delay-ms = <200>;
 	};

-- 
2.43.0



  reply	other threads:[~2026-11-20 11:40 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-20 11:40 [PATCH 0/4] arm64: dts: allwinner: h5: orangepi-zero-plus2: Fix Bluetooth and USB gadget Ivan Pfarher via B4 Relay
2026-11-20 11:40 ` Ivan Pfarher via B4 Relay [this message]
2026-11-20 11:40 ` [PATCH 2/4] arm64: dts: allwinner: h5: orangepi-zero-plus2: Add AP6212 Bluetooth Ivan Pfarher via B4 Relay
2026-11-20 11:40 ` [PATCH 3/4] arm64: dts: allwinner: h5: orangepi-zero-plus2: Fix USB peripheral mode Ivan Pfarher via B4 Relay
2026-11-20 11:40 ` [PATCH 4/4] arm64: dts: allwinner: h5: orangepi-zero-plus2: Add MMC aliases Ivan Pfarher via B4 Relay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261120-orangepi-zero-plus2-fixes-v1-1-ecd792189f27@gmail.com \
    --to=devnull+ipfarher.gmail.com@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=ipfarher@gmail.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=robh@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox