Devicetree
 help / color / mirror / Atom feed
From: Viral Patel <viral8854@gmail.com>
To: "Jonathan Cameron" <jic23@kernel.org>,
	"David Lechner" <dlechner@baylibre.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Dixit Parmar" <dixitparmar19@gmail.com>
Cc: Victor Chernyakin <chernyakin.victor.j@outlook.com>,
	 linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org, Viral Patel <viral8854@gmail.com>
Subject: [PATCH v2 1/2] dt-bindings: iio: magnetometer: infineon,tlv493d-a1b6: add TLE493D-W2B6
Date: Sat, 21 Nov 2026 11:25:10 +0530	[thread overview]
Message-ID: <20261121-tle493d-v2-1-92d7e57cec89@gmail.com> (raw)
In-Reply-To: <20261121-tle493d-v2-0-92d7e57cec89@gmail.com>

Add the Infineon TLE493D-W2B6, a 3D Hall effect magnetic sensor with
12-bit resolution per axis and an integrated temperature sensor,
accessed over I2C. It is a second-generation sibling of the
TLV493D-A1B6 with a different register interface, so it gets its own
compatible, but it has the same supply range and the same /INT output
sharing the SCL pin, so it fits the existing binding.

The A0 to A3 variants of the part only differ in their default I2C
address, so a single compatible covers all of them.

Signed-off-by: Viral Patel <viral8854@gmail.com>
---
 .../bindings/iio/magnetometer/infineon,tlv493d-a1b6.yaml   | 14 ++++++++++++--
 MAINTAINERS                                                |  6 ++++++
 2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/magnetometer/infineon,tlv493d-a1b6.yaml b/Documentation/devicetree/bindings/iio/magnetometer/infineon,tlv493d-a1b6.yaml
index dd23a9370a71..3f0058cbf538 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/infineon,tlv493d-a1b6.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/infineon,tlv493d-a1b6.yaml
@@ -4,17 +4,27 @@
 $id: http://devicetree.org/schemas/iio/magnetometer/infineon,tlv493d-a1b6.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Infineon Technologies TLV493D Low-Power 3D Magnetic Sensor
+title: Infineon Technologies TLV493D and TLE493D 3D Magnetic Sensors
 
 maintainers:
   - Dixit Parmar <dixitparmar19@gmail.com>
+  - Viral Patel <viral8854@gmail.com>
+
+description: |
+  3D Hall effect magnetic sensors with an I2C interface. The /INT output
+  shares a pin with SCL.
+
+  The A0 to A3 variants of the TLE493D-W2B6 only differ in their default
+  I2C address (0x35, 0x22, 0x78 and 0x44).
 
 properties:
   $nodename:
     pattern: '^magnetometer@[0-9a-f]+$'
 
   compatible:
-    const: infineon,tlv493d-a1b6
+    enum:
+      - infineon,tle493d-w2b6
+      - infineon,tlv493d-a1b6
 
   reg:
     maxItems: 1
diff --git a/MAINTAINERS b/MAINTAINERS
index 02015eaec312..c3004f683e78 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13117,6 +13117,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/sound/infineon,peb2466.yaml
 F:	sound/soc/codecs/peb2466.c
 
+INFINEON TLE493D-W2B6 DRIVER
+M:	Viral Patel <viral8854@gmail.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/magnetometer/infineon,tlv493d-a1b6.yaml
+
 INFINEON TLV493D Driver
 M:	Dixit Parmar <dixitparmar19@gmail.com>
 L:	linux-iio@vger.kernel.org

-- 
2.43.0


  reply	other threads:[~2026-11-21  5:55 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-21  5:55 [PATCH v2 0/2] iio: magnetometer: add Infineon TLE493D-W2B6 support Viral Patel
2026-11-21  5:55 ` Viral Patel [this message]
2026-11-21  5:55 ` [PATCH v2 2/2] iio: magnetometer: add Infineon TLE493D-W2B6 driver Viral Patel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261121-tle493d-v2-1-92d7e57cec89@gmail.com \
    --to=viral8854@gmail.com \
    --cc=andy@kernel.org \
    --cc=chernyakin.victor.j@outlook.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dixitparmar19@gmail.com \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox