From: Tuan Kiet Huynh <huynhtuankiet33@gmail.com>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org
Cc: sakari.ailus@linux.intel.com, mchehab@kernel.org,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
chernyav.a@gmail.com, Tuan Kiet Huynh <huynhtuankiet33@gmail.com>
Subject: [PATCH v2 1/2] dt-bindings: media: i2c: Add Samsung S5K5E8YX image sensor
Date: Sat, 21 Nov 2026 19:07:30 +0700 [thread overview]
Message-ID: <20261121120731.2028810-2-huynhtuankiet33@gmail.com> (raw)
In-Reply-To: <20261121120731.2028810-1-huynhtuankiet33@gmail.com>
From: Andrii Cherniavskyi <chernyav.a@gmail.com>
Add Device Tree bindings for the Samsung S5K5E8YX 5MP RAW10 CMOS image
sensor, including optional standby-gpios and MIPI CSI-2 endpoint
properties.
Signed-off-by: Andrii Cherniavskyi <chernyav.a@gmail.com>
Co-developed-by: Tuan Kiet Huynh <huynhtuankiet33@gmail.com>
Signed-off-by: Tuan Kiet Huynh <huynhtuankiet33@gmail.com>
---
.../bindings/media/i2c/samsung,s5k5e8yx.yaml | 102 ++++++++++++++++++
MAINTAINERS | 8 ++
2 files changed, 110 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/samsung,s5k5e8yx.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k5e8yx.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5e8yx.yaml
new file mode 100644
index 000000000..a70becba5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5e8yx.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/samsung,s5k5e8yx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5K5E8YX Image Sensor
+
+description:
+ Samsung S5K5E8YX image sensor is a 5MP CMOS image sensor.
+ The sensor is controlled over a serial camera control bus protocol,
+ the widest supported output image frame size is 2608x1960 at 30 frames
+ per second, data output format is RAW10 transferred over 2-lane
+ MIPI D-PHY interface.
+
+maintainers:
+ - Andrii Cherniavskyi <chernyav.a@gmail.com>
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+ compatible:
+ const: samsung,s5k5e8yx
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: MCLK supply clock.
+ maxItems: 1
+
+ reset-gpios:
+ description: Active low GPIO connected to RESET pad of the sensor.
+ maxItems: 1
+
+ standby-gpios:
+ description: Active low GPIO connected to STANDBY/XSHUTDN pad of the sensor.
+ maxItems: 1
+
+ vdda-supply:
+ description: Analogue voltage supply, 2.8 volts.
+
+ vddd-supply:
+ description: Digital core voltage supply, 1.2 volts.
+
+ vddio-supply:
+ description: Digital I/O voltage supply, 1.8 or 2.8 volts.
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ link-frequencies: true
+ remote-endpoint: true
+
+ required:
+ - link-frequencies
+ - remote-endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@2d {
+ compatible = "samsung,s5k5e8yx";
+ reg = <0x2d>;
+ clocks = <&camera_mclk 0>;
+ assigned-clocks = <&camera_mclk 0>;
+ assigned-clock-rates = <24000000>;
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ vdda-supply = <&vreg_2p8>;
+ vddd-supply = <&vreg_1p2>;
+ vddio-supply = <&vreg_1p8>;
+
+ port {
+ endpoint {
+ link-frequencies = /bits/ 64 <420000000>;
+ remote-endpoint = <&mipi_csi2_ep>;
+ };
+ };
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index f72ce07a4..b98726c35 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -25013,6 +25013,14 @@ M: Andrzej Hajda <andrzej.hajda@intel.com>
S: Supported
F: drivers/media/i2c/s5k5baf.c
+SAMSUNG S5K5E8YX CAMERA DRIVER
+M: Andrii Cherniavskyi <chernyav.a@gmail.com>
+M: Tuan Kiet Huynh <huynhtuankiet33@gmail.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/samsung,s5k5e8yx.yaml
+
SAMSUNG S5KJN1 CAMERA DRIVER
M: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
S: Maintained
--
2.43.0
next prev parent reply other threads:[~2026-11-21 12:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-21 9:19 [PATCH 1/2] dt-bindings: media: i2c: Add Samsung S5K5E8YX image sensor Tuan Kiet Huynh
2026-11-21 9:19 ` [PATCH 2/2] media: i2c: Add Samsung S5K5E8YX camera sensor driver Tuan Kiet Huynh
2026-11-21 12:07 ` [PATCH v2 0/2] " Tuan Kiet Huynh
2026-11-21 12:07 ` Tuan Kiet Huynh [this message]
2026-11-21 12:07 ` [PATCH v2 2/2] " Tuan Kiet Huynh
2026-11-21 12:31 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261121120731.2028810-2-huynhtuankiet33@gmail.com \
--to=huynhtuankiet33@gmail.com \
--cc=chernyav.a@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox