From: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
To: Manivannan Sadhasivam <mani@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>
Cc: Abel Vesa <abelvesa@kernel.org>,
alchark@flipper.net, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org,
Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Subject: [PATCH v2 0/4] power: sequencing: pcie-m2: Add PCIe M.2 Key B connector support
Date: Sun, 22 Nov 2026 12:15:50 +0530 [thread overview]
Message-ID: <20261122-pcie6_fix-v2-0-2e0fe615d90b@oss.qualcomm.com> (raw)
Add support for PCIe M.2 Mechanical Key B connectors, commonly used for
WWAN adapters.
The series introduces a DT binding for the M.2 Key B connector and
extends the PCIe M.2 power sequencing driver to handle the 3.3V/VBAT
supply and the FULL_CARD_POWER_OFF#, RESET#, and W_DISABLE1# signals.
Finally, describe the WWAN M.2 Key B connector on the Glymur CRD and the
Nord RRD. On Glymur the WWAN supply moves from the PCIe6 Root Port node to
the connector, so that the slot power is controlled through the pwrseq-pcie-m2
driver and the PCI pwrctrl framework, like the other M.2 connectors.
The series is based on the qcom tree [1], arm64-for-7.5, which has the Nord
PCIe root port DT nodes that the Nord RRD patch needs. That patch also
depends on the Nord PCIe controller support from the PCI tree, which is in
linux-next.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git/log/?h=arm64-for-7.5
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
Changes in v2:
- Binding: describe SATA/PCIe SSD Adapters too, since the Key B slot accepts
them (Alexey)
- Binding: add optional config-gpios for CONFIG_0..3 with the Table 3-18
decode, and config-state to fix the configuration on boards that do not
sense it; defaults to WWAN PCIe (Alexey)
- Binding: replace w-disable2-gpios and wowwan-gpios with gpio0-gpios to
gpio11-gpios, as GPIO_0..11 change function with the Port Configuration;
the functions are listed in the binding, with the IPC pins and CONFIG
state 14 marked as vendor defined (Rob, Alexey)
- Binding: add optional alert-gpios for the SSD SMBus ALERT# (Rob), and
i2c-parent, devslp-gpios and pln-gpios for the other SSD signals (Alexey)
- Binding: replace one port per interface with one port per muxed pin group,
with endpoints selecting the interface: PCIe lane 0/SATA, USB3.1/SSIC/
PCIe lane 1, and USB 2.0 (Rob, Alexey)
- DT: add the Nord RRD WWAN connector (new patch)
- Rebased onto the qcom tree, arm64-for-7.5
- Link to v1: https://patch.msgid.link/20261021-pcie6_fix-v1-0-ad37134c35a3@oss.qualcomm.com
---
Krishna Chaitanya Chundru (4):
dt-bindings: connector: Add PCIe M.2 Mechanical Key B connector
power: sequencing: pcie-m2: Add support for PCIe M.2 Key B connectors
arm64: dts: qcom: glymur-crd: Describe the PCIe M.2 Key B connector
arm64: dts: qcom: nord-rrd: Describe the PCIe M.2 Key B connector
.../bindings/connector/pcie-m2-b-connector.yaml | 332 +++++++++++++++++++++
MAINTAINERS | 1 +
arch/arm64/boot/dts/qcom/glymur-crd.dtsi | 29 +-
arch/arm64/boot/dts/qcom/nord-rrd.dts | 40 +++
drivers/power/sequencing/pwrseq-pcie-m2.c | 70 +++++
5 files changed, 470 insertions(+), 2 deletions(-)
---
base-commit: dde0308a2f8867806a444df1fdd7e685b1c56d5b
change-id: 20261021-pcie6_fix-cf66f4b8b387
Best regards,
--
Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
next reply other threads:[~2026-11-22 6:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-22 6:45 Krishna Chaitanya Chundru [this message]
2026-11-22 6:45 ` [PATCH v2 1/4] dt-bindings: connector: Add PCIe M.2 Mechanical Key B connector Krishna Chaitanya Chundru
2026-11-22 6:45 ` [PATCH v2 2/4] power: sequencing: pcie-m2: Add support for PCIe M.2 Key B connectors Krishna Chaitanya Chundru
2026-11-22 7:00 ` sashiko-bot
2026-11-22 6:45 ` [PATCH v2 3/4] arm64: dts: qcom: glymur-crd: Describe the PCIe M.2 Key B connector Krishna Chaitanya Chundru
2026-11-22 6:45 ` [PATCH v2 4/4] arm64: dts: qcom: nord-rrd: " Krishna Chaitanya Chundru
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261122-pcie6_fix-v2-0-2e0fe615d90b@oss.qualcomm.com \
--to=krishna.chundru@oss.qualcomm.com \
--cc=abelvesa@kernel.org \
--cc=alchark@flipper.net \
--cc=andersson@kernel.org \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mani@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox