From: Gerard Marull-Paretas <gerard@teslabs.com>
To: Jonathan Cameron <jic23@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: "David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Frank Li" <Frank.li@nxp.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/3] dt-bindings: iio: magnetometer: Add MEMSIC MMC5603 and MMC5633
Date: Sun, 22 Nov 2026 20:08:34 +0100 [thread overview]
Message-ID: <20261122190836.66111-2-gerard@teslabs.com> (raw)
In-Reply-To: <20261122190836.66111-1-gerard@teslabs.com>
The MMC5603NJ and MMC5633NJL are listed in trivial-devices.yaml, which
allows no properties besides the register address and interrupts.
Boards need to describe how the sensor is oriented, and the supply it
runs from, which is often switched on wearables.
Give them a binding of their own, covering both the I2C and I3C
connections of the MMC5633NJL.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
---
.../iio/magnetometer/memsic,mmc5633.yaml | 61 +++++++++++++++++++
.../devicetree/bindings/trivial-devices.yaml | 4 --
2 files changed, 61 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/memsic,mmc5633.yaml
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/memsic,mmc5633.yaml b/Documentation/devicetree/bindings/iio/magnetometer/memsic,mmc5633.yaml
new file mode 100644
index 000000000000..423b8ecbb9e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/memsic,mmc5633.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/memsic,mmc5633.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MEMSIC MMC5603 and MMC5633 3-axis magnetic sensors
+
+maintainers:
+ - Gerard Marull-Paretas <gerard@teslabs.com>
+
+description:
+ The MMC5603NJ is connected over I2C, the MMC5633NJL over I2C or I3C.
+
+properties:
+ compatible:
+ enum:
+ - memsic,mmc5603
+ - memsic,mmc5633
+
+ reg:
+ maxItems: 1
+
+ vdd-supply: true
+
+ mount-matrix:
+ description: An optional 3x3 mounting rotation matrix.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ magnetometer@30 {
+ compatible = "memsic,mmc5603";
+ reg = <0x30>;
+ vdd-supply = <&vdd_1v8>;
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
+ };
+ };
+
+ - |
+ i3c {
+ #address-cells = <3>;
+ #size-cells = <0>;
+
+ magnetometer@30,4a20000f000 {
+ compatible = "memsic,mmc5633";
+ reg = <0x30 0x4a2 0xf000>;
+ vdd-supply = <&vdd_1v8>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index a8b2b9deade4..523c205c0880 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -261,10 +261,6 @@ properties:
- meas,tsys01
# MEMSIC magnetometer
- memsic,mmc35240
- # MEMSIC 3-axis magnetometer
- - memsic,mmc5603
- # MEMSIC 3-axis magnetometer (Support I3C HDR)
- - memsic,mmc5633
# MEMSIC 3-axis accelerometer
- memsic,mxc4005
# MEMSIC 2-axis 8-bit digital accelerometer
--
2.45.2
next prev parent reply other threads:[~2026-11-22 19:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-22 19:08 [PATCH v2 0/3] iio: magnetometer: mmc5633: Binding, supply and mount matrix Gerard Marull-Paretas
2026-11-22 19:08 ` Gerard Marull-Paretas [this message]
2026-11-22 19:08 ` [PATCH v2 2/3] iio: magnetometer: mmc5633: Enable the VDD supply Gerard Marull-Paretas
2026-11-22 19:08 ` [PATCH v2 3/3] iio: magnetometer: mmc5633: Add mount matrix support Gerard Marull-Paretas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261122190836.66111-2-gerard@teslabs.com \
--to=gerard@teslabs.com \
--cc=Frank.li@nxp.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox