devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Florian Fainelli <florian@openwrt.org>
To: Arnd Bergmann <arnd@arndb.de>
Cc: olof@lixom.net, devicetree-discuss@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 3/8] ARM: MCS814x: add Device Tree bindings documentation
Date: Tue, 17 Jul 2012 15:35:24 +0200	[thread overview]
Message-ID: <2030205.GuLVzJk5dq@flexo> (raw)
In-Reply-To: <201207171324.11392.arnd@arndb.de>

On Tuesday 17 July 2012 13:24:10 Arnd Bergmann wrote:
> On Sunday 15 July 2012, Florian Fainelli wrote:
> 
> > diff --git a/Documentation/devicetree/bindings/arm/mcs814x/mcs814x-pci.txt 
b/Documentation/devicetree/bindings/arm/mcs814x/mcs814x-pci.txt
> > new file mode 100644
> > index 0000000..de59b04
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/mcs814x/mcs814x-pci.txt
> > @@ -0,0 +1,16 @@
> > +Moschip MCS814x PCI controller bindings
> > +---------------------------------------
> > +
> > +Required properties:
> > +- compatible: should be "moschip,mcs814x-pci"
> > +- reg: should contain the base register address and length of the PCI 
controller
> > +  configuration register as well as the base register address and length 
of the
> > +  PCI eeprom emulator
> > +- interrupts: should contain the interrupt line of the abort interrupt
> > +- #address-cells: should be 3
> > +- #size-cells: should be 2
> > +- ranges: should contain the properly encoded PCI ranges of the IO, non-
prefetchable
> > +  and prefetchable memory regions
> > +- #interrupt-cells: should be 1
> > +- interrupt-map-mask: should be 0
> > +- interrupt-map: should be the properly encoded PCI slot/pin to interrupt 
line
> 
> interrupt-map-mask of 0 implies that all devices are wired to the
> same IRQ lines, which is rather unusual. Better leave that open
> so the interrupt-map can be written to work on any board.
> 
> > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt 
b/Documentation/devicetree/bindings/vendor-prefixes.txt
> > index 6eab917..943e4f3 100644
> > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> > @@ -28,6 +28,7 @@ linux	Linux-specific binding
> >  marvell	Marvell Technology Group Ltd.
> >  maxim	Maxim Integrated Products
> >  mosaixtech	Mosaix Technologies, Inc.
> > +moschp		Moschip Semiconductors
> >  national	National Semiconductor
> >  nintendo	Nintendo
> >  nvidia	NVIDIA
> 
> This string does not match what you use everywhere else. Please fix
> either the documentation here or every other instance. The stock
> ticker symbol is MOSCHIP.BO, so using "moschip" is probably better
> than "moschp".

This was actually a typo, I meant to type "moschip" instead of "moschp", I 
will fix that of course.
--
Florian

  reply	other threads:[~2012-07-17 13:35 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-15 14:49 [PATCH 0/8] ARM: support for Moschip MCS814x SoCs Florian Fainelli
2012-07-15 14:49 ` [PATCH 1/8] " Florian Fainelli
2012-07-16 12:29   ` Thomas Petazzoni
2012-07-16 12:43     ` Florian Fainelli
2012-07-16 15:55       ` Arnd Bergmann
2012-07-16 17:57       ` Nicolas Pitre
2012-07-23 19:11     ` Florian Fainelli
2012-07-27 22:42       ` Linus Walleij
     [not found]   ` <1342363754-30808-2-git-send-email-florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2012-07-16 15:54     ` Arnd Bergmann
     [not found]       ` <201207161554.04812.arnd-r2nGTMty4D4@public.gmane.org>
2012-07-16 20:47         ` Turquette, Mike
2012-07-17  9:41           ` Florian Fainelli
2012-07-17 10:47           ` Florian Fainelli
2012-07-16 22:12         ` Linus Walleij
2012-07-17  9:35           ` Florian Fainelli
2012-07-17  9:34       ` Florian Fainelli
2012-07-17 13:07         ` Arnd Bergmann
2012-07-17 13:32           ` Florian Fainelli
2012-07-17 13:45             ` Arnd Bergmann
2012-07-17 10:16       ` Thomas Petazzoni
2012-07-17 13:12         ` Arnd Bergmann
2012-07-17 13:28           ` Thomas Petazzoni
2012-07-17 13:51             ` Arnd Bergmann
2012-07-16 22:06     ` Linus Walleij
2012-07-15 14:49 ` [PATCH 2/8] ARM: MCS814x: add Device Tree based MCS8140 board support Florian Fainelli
     [not found]   ` <1342363754-30808-3-git-send-email-florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2012-07-17 13:19     ` Arnd Bergmann
2012-07-17 13:34       ` Florian Fainelli
2012-07-17 13:53         ` Arnd Bergmann
2012-07-17 13:57           ` Florian Fainelli
2012-07-15 14:49 ` [PATCH 3/8] ARM: MCS814x: add Device Tree bindings documentation Florian Fainelli
     [not found]   ` <1342363754-30808-4-git-send-email-florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2012-07-17 13:24     ` Arnd Bergmann
2012-07-17 13:35       ` Florian Fainelli [this message]
2012-07-15 14:49 ` [PATCH 4/8] ARM: MCS814X: add DTS file for Tigal/Robotech RBT-832 Florian Fainelli
     [not found]   ` <1342363754-30808-5-git-send-email-florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2012-07-17 13:27     ` Arnd Bergmann
2012-07-15 14:49 ` [PATCH 5/8] ARM: MCS814x: add DTS file for Devolo dLAN USB Extender Florian Fainelli
2012-07-15 14:49 ` [PATCH 6/8] ARM: MCS814x: provide a sample defconfig file Florian Fainelli
2012-07-15 14:49 ` [PATCH 7/8] ARM: MSC814X: add Kconfig and Makefile to arch/arm Florian Fainelli
2012-07-15 14:49 ` [PATCH 8/8] ARM: MSC814x: add MAINTAINERS entry Florian Fainelli
     [not found] ` <1342363754-30808-1-git-send-email-florian-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2012-07-15 19:59   ` [PATCH 0/8] ARM: support for Moschip MCS814x SoCs Arnd Bergmann
2012-07-16  8:16     ` Florian Fainelli
     [not found]     ` <201207151959.19620.arnd-r2nGTMty4D4@public.gmane.org>
2012-07-16 18:09       ` Nicolas Pitre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2030205.GuLVzJk5dq@flexo \
    --to=florian@openwrt.org \
    --cc=arnd@arndb.de \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=olof@lixom.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).