From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marek.vasut@gmail.com>
Subject: Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller
 driver
Date: Wed, 10 Apr 2019 08:27:55 +0200
Message-ID: <2095d059-8276-a01a-7c3a-da4647f7b7df@gmail.com>
References: <1553847606-18122-1-git-send-email-masonccyang@mxic.com.tw>
 <1553847606-18122-3-git-send-email-masonccyang@mxic.com.tw>
 <a2dc294f-f2a1-2469-1f44-db67f9b8cc10@cogentembedded.com>
 <OFC7F0028A.CFF6BD04-ON482583D8.00084FA1-482583D8.0008985F@mxic.com.tw>
Mime-Version: 1.0
Content-Type: text/plain; charset=windows-1252
Content-Transfer-Encoding: 8bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <OFC7F0028A.CFF6BD04-ON482583D8.00084FA1-482583D8.0008985F@mxic.com.tw>
Content-Language: en-US
Sender: linux-kernel-owner@vger.kernel.org
To: masonccyang@mxic.com.tw, Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: bbrezillon@kernel.org, broonie@kernel.org, devicetree@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be>, Simon Horman <horms@verge.net.au>, juliensu@mxic.com.tw, lee.jones@linaro.org, linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org, linux-spi@vger.kernel.org, mark.rutland@arm.com, robh+dt@kernel.org, zhengxunli@mxic.com.tw
List-Id: devicetree@vger.kernel.org

On 4/10/19 3:33 AM, masonccyang@mxic.com.tw wrote:
> Hi Sergei,
> 
>> > +static ssize_t rpc_spi_mem_dirmap_write(struct spi_mem_dirmap_desc
> *desc,
>> > +               u64 offs, size_t len, const void *buf)
>> > +{
>> > +   struct rpc_spi *rpc =
>> > +         spi_controller_get_devdata(desc->mem->spi->controller);
>> > +   int ret;
>> > +
>> > +   if (offs + desc->info.offset + len > U32_MAX)
>> > +      return -EINVAL;
>> > +
>> > +   if (len > RPC_WBUF_SIZE)
>> > +      len = RPC_WBUF_SIZE;
>> > +
>> > +   ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
>> > +   if (ret)
>> > +      return ret;
>> > +
>> > +   rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
>> > +                &desc->info.op_tmpl, &offs, &len);
>> > +
>> > +   regmap_update_bits(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD,
> RPC_CMNCR_MD);
>> > +
>> > +   regmap_write(rpc->regmap, RPC_SMDRENR, 0);
>> > +
>> > +   regmap_update_bits(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_STRTIM(7) |
>> > +            RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF,
>> > +            RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF);
>> > +
>> > +   memcpy_toio(rpc->wbuf, buf, len);
>>
>>    Wait, doesn't the manual say that the whole 256-byte buffer should be
>> filled?  I think that short chunks have to be written w/o WBUF (done,
> in fact,
>> by the HF driver).
>>
> 
> From spi-nor.c layer always transfer 256 bytes data with page program
> command.

Does that apply even for flashes with not-256-byte pages ?

-- 
Best regards,
Marek Vasut