* [PATCH v10 0/2] S5K5BAF camera sensor driver @ 2013-12-05 11:38 Andrzej Hajda 2013-12-05 11:38 ` [PATCH v10 1/2] s5k5baf: add " Andrzej Hajda 2013-12-05 11:38 ` [PATCH v10 2/2] s5k5baf: add DT bindings for camera sensor Andrzej Hajda 0 siblings, 2 replies; 5+ messages in thread From: Andrzej Hajda @ 2013-12-05 11:38 UTC (permalink / raw) To: linux-media Cc: Andrzej Hajda, laurent.pinchart, linux-samsung-soc, devicetree, Sylwester Nawrocki, Kyungmin Park, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell, Grant Likely Hi, This is the 10th iteration of S5K5BAF camera patch (time for celebration). All changes are described in patches. Regards Andrzej Andrzej Hajda (2): s5k5baf: add camera sensor driver s5k5baf: add DT bindings for camera sensor .../devicetree/bindings/media/samsung-s5k5baf.txt | 58 + MAINTAINERS | 7 + drivers/media/i2c/Kconfig | 7 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/s5k5baf.c | 2043 ++++++++++++++++++++ 5 files changed, 2116 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/samsung-s5k5baf.txt create mode 100644 drivers/media/i2c/s5k5baf.c -- 1.8.3.2 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v10 1/2] s5k5baf: add camera sensor driver 2013-12-05 11:38 [PATCH v10 0/2] S5K5BAF camera sensor driver Andrzej Hajda @ 2013-12-05 11:38 ` Andrzej Hajda 2013-12-19 13:54 ` Sylwester Nawrocki 2013-12-05 11:38 ` [PATCH v10 2/2] s5k5baf: add DT bindings for camera sensor Andrzej Hajda 1 sibling, 1 reply; 5+ messages in thread From: Andrzej Hajda @ 2013-12-05 11:38 UTC (permalink / raw) To: linux-media Cc: Andrzej Hajda, laurent.pinchart, linux-samsung-soc, devicetree, Sylwester Nawrocki, Kyungmin Park, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell, Grant Likely Driver for Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP. The driver exposes the sensor as two V4L2 subdevices: - S5K5BAF-CIS - pure CMOS Image Sensor, fixed 1600x1200 format, no controls. - S5K5BAF-ISP - Image Signal Processor, formats up to 1600x1200, pre/post ISP cropping, downscaling via selection API, controls. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> --- v10 - bindings moved to separate patch v9 - patch, ccm and cis configuration blobs moved to firmware set files, - minor improvements of bindings, - cosmetic changes v8 - improved description of data-lanes binding, - added algorithm caching, - added comments to functions, - video bus type checking moved to probe, - clk_get/put moved to probe, - moved streaming checking under mutex, - use proper functions for endian conversion, - probe returns -EPROBE_DEFER in case it cannot get clock, - v4l2_async_unregister_subdev is called on remove, - cosmetic changes v7 - changed description of 'clock-frequency' DT property v6 - endpoint node presence is now optional, - added asynchronous subdev registration support and clock handling, - use named gpios in DT bindings v5 - removed hflip/vflip device tree properties v4 - GPL changed to GPLv2, - bitfields replaced by u8, - cosmetic changes, - corrected s_stream flow, - gpio pins are no longer exported, - added I2C addresses to subdev names, - CIS subdev registration postponed after succesfull HW initialization, - added enums for pads, - selections are initialized only during probe, - default resolution changed to 1600x1200, - state->error pattern removed from few other functions, - entity link creation moved to registered callback. v3: - narrowed state->error usage to i2c and power errors, - private gain controls replaced by red/blue balance user controls, - added checks to devicetree gpio node parsing v2: - lower-cased driver name, - removed underscore from regulator names, - removed platform data code, - v4l controls grouped in anonymous structs, - added s5k5baf_clear_error function, - private controls definitions moved to uapi header file, - added v4l2-controls.h reservation for private controls, - corrected subdev registered/unregistered code, - .log_status sudbev op set to v4l2 helper, - moved entity link creation to probe routines, - added cleanup on error to probe function. --- MAINTAINERS | 7 + drivers/media/i2c/Kconfig | 7 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/s5k5baf.c | 2043 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 2058 insertions(+) create mode 100644 drivers/media/i2c/s5k5baf.c diff --git a/MAINTAINERS b/MAINTAINERS index 51cc504..2a59cc1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7355,6 +7355,13 @@ L: linux-media@vger.kernel.org S: Supported F: drivers/media/i2c/s5c73m3/* +SAMSUNG S5K5BAF CAMERA DRIVER +M: Kyungmin Park <kyungmin.park@samsung.com> +M: Andrzej Hajda <a.hajda@samsung.com> +L: linux-media@vger.kernel.org +S: Supported +F: drivers/media/i2c/s5k5baf.c + SERIAL DRIVERS M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> L: linux-serial@vger.kernel.org diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 842654d..f2ba337 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -594,6 +594,13 @@ config VIDEO_S5K4ECGX This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M camera sensor with an embedded SoC image signal processor. +config VIDEO_S5K5BAF + tristate "Samsung S5K5BAF sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + ---help--- + This is a V4L2 sensor-level driver for Samsung S5K5BAF 2M + camera sensor with an embedded SoC image signal processor. + source "drivers/media/i2c/smiapp/Kconfig" config VIDEO_S5C73M3 diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index e03f177..eb2d6ea 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -67,6 +67,7 @@ obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o obj-$(CONFIG_VIDEO_S5K4ECGX) += s5k4ecgx.o +obj-$(CONFIG_VIDEO_S5K5BAF) += s5k5baf.o obj-$(CONFIG_VIDEO_S5C73M3) += s5c73m3/ obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o obj-$(CONFIG_VIDEO_AS3645A) += as3645a.o diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c new file mode 100644 index 0000000..b1877ad --- /dev/null +++ b/drivers/media/i2c/s5k5baf.c @@ -0,0 +1,2043 @@ +/* + * Driver for Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor + * with embedded SoC ISP. + * + * Copyright (C) 2013, Samsung Electronics Co., Ltd. + * Andrzej Hajda <a.hajda@samsung.com> + * + * Based on S5K6AA driver authored by Sylwester Nawrocki + * Copyright (C) 2013, Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/media.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#include <media/media-entity.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-subdev.h> +#include <media/v4l2-mediabus.h> +#include <media/v4l2-of.h> + +static int debug; +module_param(debug, int, 0644); + +#define S5K5BAF_DRIVER_NAME "s5k5baf" +#define S5K5BAF_DEFAULT_MCLK_FREQ 24000000U +#define S5K5BAF_CLK_NAME "mclk" + +#define S5K5BAF_FW_FILENAME "s5k5baf-cfg.bin" +#define S5K5BAF_FW_TAG "SF00" +#define S5K5BAG_FW_TAG_LEN 2 +#define S5K5BAG_FW_MAX_COUNT 16 + +#define S5K5BAF_CIS_WIDTH 1600 +#define S5K5BAF_CIS_HEIGHT 1200 +#define S5K5BAF_WIN_WIDTH_MIN 8 +#define S5K5BAF_WIN_HEIGHT_MIN 8 +#define S5K5BAF_GAIN_RED_DEF 127 +#define S5K5BAF_GAIN_GREEN_DEF 95 +#define S5K5BAF_GAIN_BLUE_DEF 180 +/* Default number of MIPI CSI-2 data lanes used */ +#define S5K5BAF_DEF_NUM_LANES 1 + +#define AHB_MSB_ADDR_PTR 0xfcfc + +/* + * Register interface pages (the most significant word of the address) + */ +#define PAGE_IF_HW 0xd000 +#define PAGE_IF_SW 0x7000 + +/* + * H/W register Interface (PAGE_IF_HW) + */ +#define REG_SW_LOAD_COMPLETE 0x0014 +#define REG_CMDWR_PAGE 0x0028 +#define REG_CMDWR_ADDR 0x002a +#define REG_CMDRD_PAGE 0x002c +#define REG_CMDRD_ADDR 0x002e +#define REG_CMD_BUF 0x0f12 +#define REG_SET_HOST_INT 0x1000 +#define REG_CLEAR_HOST_INT 0x1030 +#define REG_PATTERN_SET 0x3100 +#define REG_PATTERN_WIDTH 0x3118 +#define REG_PATTERN_HEIGHT 0x311a +#define REG_PATTERN_PARAM 0x311c + +/* + * S/W register interface (PAGE_IF_SW) + */ + +/* Firmware revision information */ +#define REG_FW_APIVER 0x012e +#define S5K5BAF_FW_APIVER 0x0001 +#define REG_FW_REVISION 0x0130 +#define REG_FW_SENSOR_ID 0x0152 + +/* Initialization parameters */ +/* Master clock frequency in KHz */ +#define REG_I_INCLK_FREQ_L 0x01b8 +#define REG_I_INCLK_FREQ_H 0x01ba +#define MIN_MCLK_FREQ_KHZ 6000U +#define MAX_MCLK_FREQ_KHZ 48000U +#define REG_I_USE_NPVI_CLOCKS 0x01c6 +#define NPVI_CLOCKS 1 +#define REG_I_USE_NMIPI_CLOCKS 0x01c8 +#define NMIPI_CLOCKS 1 +#define REG_I_BLOCK_INTERNAL_PLL_CALC 0x01ca + +/* Clock configurations, n = 0..2. REG_I_* frequency unit is 4 kHz. */ +#define REG_I_OPCLK_4KHZ(n) ((n) * 6 + 0x01cc) +#define REG_I_MIN_OUTRATE_4KHZ(n) ((n) * 6 + 0x01ce) +#define REG_I_MAX_OUTRATE_4KHZ(n) ((n) * 6 + 0x01d0) +#define SCLK_PVI_FREQ 24000 +#define SCLK_MIPI_FREQ 48000 +#define PCLK_MIN_FREQ 6000 +#define PCLK_MAX_FREQ 48000 +#define REG_I_USE_REGS_API 0x01de +#define REG_I_INIT_PARAMS_UPDATED 0x01e0 +#define REG_I_ERROR_INFO 0x01e2 + +/* General purpose parameters */ +#define REG_USER_BRIGHTNESS 0x01e4 +#define REG_USER_CONTRAST 0x01e6 +#define REG_USER_SATURATION 0x01e8 +#define REG_USER_SHARPBLUR 0x01ea + +#define REG_G_SPEC_EFFECTS 0x01ee +#define REG_G_ENABLE_PREV 0x01f0 +#define REG_G_ENABLE_PREV_CHG 0x01f2 +#define REG_G_NEW_CFG_SYNC 0x01f8 +#define REG_G_PREVREQ_IN_WIDTH 0x01fa +#define REG_G_PREVREQ_IN_HEIGHT 0x01fc +#define REG_G_PREVREQ_IN_XOFFS 0x01fe +#define REG_G_PREVREQ_IN_YOFFS 0x0200 +#define REG_G_PREVZOOM_IN_WIDTH 0x020a +#define REG_G_PREVZOOM_IN_HEIGHT 0x020c +#define REG_G_PREVZOOM_IN_XOFFS 0x020e +#define REG_G_PREVZOOM_IN_YOFFS 0x0210 +#define REG_G_INPUTS_CHANGE_REQ 0x021a +#define REG_G_ACTIVE_PREV_CFG 0x021c +#define REG_G_PREV_CFG_CHG 0x021e +#define REG_G_PREV_OPEN_AFTER_CH 0x0220 +#define REG_G_PREV_CFG_ERROR 0x0222 +#define CFG_ERROR_RANGE 0x0b +#define REG_G_PREV_CFG_BYPASS_CHANGED 0x022a +#define REG_G_ACTUAL_P_FR_TIME 0x023a +#define REG_G_ACTUAL_P_OUT_RATE 0x023c +#define REG_G_ACTUAL_C_FR_TIME 0x023e +#define REG_G_ACTUAL_C_OUT_RATE 0x0240 + +/* Preview control section. n = 0...4. */ +#define PREG(n, x) ((n) * 0x26 + x) +#define REG_P_OUT_WIDTH(n) PREG(n, 0x0242) +#define REG_P_OUT_HEIGHT(n) PREG(n, 0x0244) +#define REG_P_FMT(n) PREG(n, 0x0246) +#define REG_P_MAX_OUT_RATE(n) PREG(n, 0x0248) +#define REG_P_MIN_OUT_RATE(n) PREG(n, 0x024a) +#define REG_P_PVI_MASK(n) PREG(n, 0x024c) +#define PVI_MASK_MIPI 0x52 +#define REG_P_CLK_INDEX(n) PREG(n, 0x024e) +#define CLK_PVI_INDEX 0 +#define CLK_MIPI_INDEX NPVI_CLOCKS +#define REG_P_FR_RATE_TYPE(n) PREG(n, 0x0250) +#define FR_RATE_DYNAMIC 0 +#define FR_RATE_FIXED 1 +#define FR_RATE_FIXED_ACCURATE 2 +#define REG_P_FR_RATE_Q_TYPE(n) PREG(n, 0x0252) +#define FR_RATE_Q_DYNAMIC 0 +#define FR_RATE_Q_BEST_FRRATE 1 /* Binning enabled */ +#define FR_RATE_Q_BEST_QUALITY 2 /* Binning disabled */ +/* Frame period in 0.1 ms units */ +#define REG_P_MAX_FR_TIME(n) PREG(n, 0x0254) +#define REG_P_MIN_FR_TIME(n) PREG(n, 0x0256) +#define S5K5BAF_MIN_FR_TIME 333 /* x100 us */ +#define S5K5BAF_MAX_FR_TIME 6500 /* x100 us */ +/* The below 5 registers are for "device correction" values */ +#define REG_P_SATURATION(n) PREG(n, 0x0258) +#define REG_P_SHARP_BLUR(n) PREG(n, 0x025a) +#define REG_P_GLAMOUR(n) PREG(n, 0x025c) +#define REG_P_COLORTEMP(n) PREG(n, 0x025e) +#define REG_P_GAMMA_INDEX(n) PREG(n, 0x0260) +#define REG_P_PREV_MIRROR(n) PREG(n, 0x0262) +#define REG_P_CAP_MIRROR(n) PREG(n, 0x0264) +#define REG_P_CAP_ROTATION(n) PREG(n, 0x0266) + +/* Extended image property controls */ +/* Exposure time in 10 us units */ +#define REG_SF_USR_EXPOSURE_L 0x03bc +#define REG_SF_USR_EXPOSURE_H 0x03be +#define REG_SF_USR_EXPOSURE_CHG 0x03c0 +#define REG_SF_USR_TOT_GAIN 0x03c2 +#define REG_SF_USR_TOT_GAIN_CHG 0x03c4 +#define REG_SF_RGAIN 0x03c6 +#define REG_SF_RGAIN_CHG 0x03c8 +#define REG_SF_GGAIN 0x03ca +#define REG_SF_GGAIN_CHG 0x03cc +#define REG_SF_BGAIN 0x03ce +#define REG_SF_BGAIN_CHG 0x03d0 +#define REG_SF_WBGAIN_CHG 0x03d2 +#define REG_SF_FLICKER_QUANT 0x03d4 +#define REG_SF_FLICKER_QUANT_CHG 0x03d6 + +/* Output interface (parallel/MIPI) setup */ +#define REG_OIF_EN_MIPI_LANES 0x03f2 +#define REG_OIF_EN_PACKETS 0x03f4 +#define EN_PACKETS_CSI2 0xc3 +#define REG_OIF_CFG_CHG 0x03f6 + +/* Auto-algorithms enable mask */ +#define REG_DBG_AUTOALG_EN 0x03f8 +#define AALG_ALL_EN BIT(0) +#define AALG_AE_EN BIT(1) +#define AALG_DIVLEI_EN BIT(2) +#define AALG_WB_EN BIT(3) +#define AALG_USE_WB_FOR_ISP BIT(4) +#define AALG_FLICKER_EN BIT(5) +#define AALG_FIT_EN BIT(6) +#define AALG_WRHW_EN BIT(7) + +/* Pointers to color correction matrices */ +#define REG_PTR_CCM_HORIZON 0x06d0 +#define REG_PTR_CCM_INCANDESCENT 0x06d4 +#define REG_PTR_CCM_WARM_WHITE 0x06d8 +#define REG_PTR_CCM_COOL_WHITE 0x06dc +#define REG_PTR_CCM_DL50 0x06e0 +#define REG_PTR_CCM_DL65 0x06e4 +#define REG_PTR_CCM_OUTDOOR 0x06ec + +#define REG_ARR_CCM(n) (0x2800 + 36 * (n)) + +static const char * const s5k5baf_supply_names[] = { + "vdda", /* Analog power supply 2.8V (2.6V to 3.0V) */ + "vddreg", /* Regulator input power supply 1.8V (1.7V to 1.9V) + or 2.8V (2.6V to 3.0) */ + "vddio", /* I/O power supply 1.8V (1.65V to 1.95V) + or 2.8V (2.5V to 3.1V) */ +}; +#define S5K5BAF_NUM_SUPPLIES ARRAY_SIZE(s5k5baf_supply_names) + +struct s5k5baf_gpio { + int gpio; + int level; +}; + +enum s5k5baf_gpio_id { + STBY, + RST, + NUM_GPIOS, +}; + +#define PAD_CIS 0 +#define PAD_OUT 1 +#define NUM_CIS_PADS 1 +#define NUM_ISP_PADS 2 + +struct s5k5baf_pixfmt { + enum v4l2_mbus_pixelcode code; + u32 colorspace; + /* REG_P_FMT(x) register value */ + u16 reg_p_fmt; +}; + +struct s5k5baf_ctrls { + struct v4l2_ctrl_handler handler; + struct { /* Auto / manual white balance cluster */ + struct v4l2_ctrl *awb; + struct v4l2_ctrl *gain_red; + struct v4l2_ctrl *gain_blue; + }; + struct { /* Mirror cluster */ + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *vflip; + }; + struct { /* Auto exposure / manual exposure and gain cluster */ + struct v4l2_ctrl *auto_exp; + struct v4l2_ctrl *exposure; + struct v4l2_ctrl *gain; + }; +}; + +enum { + S5K5BAF_FW_ID_PATCH, + S5K5BAF_FW_ID_CCM, + S5K5BAF_FW_ID_CIS, +}; + +struct s5k5baf_fw { + u16 count; + struct { + u16 id; + u16 offset; + } seq[0]; + u16 data[0]; +}; + +struct s5k5baf { + struct s5k5baf_gpio gpios[NUM_GPIOS]; + enum v4l2_mbus_type bus_type; + u8 nlanes; + struct regulator_bulk_data supplies[S5K5BAF_NUM_SUPPLIES]; + + struct clk *clock; + u32 mclk_frequency; + + struct s5k5baf_fw *fw; + + struct v4l2_subdev cis_sd; + struct media_pad cis_pad; + + struct v4l2_subdev sd; + struct media_pad pads[NUM_ISP_PADS]; + + /* protects the struct members below */ + struct mutex lock; + + int error; + + struct v4l2_rect crop_sink; + struct v4l2_rect compose; + struct v4l2_rect crop_source; + /* index to s5k5baf_formats array */ + int pixfmt; + /* actual frame interval in 100us */ + u16 fiv; + /* requested frame interval in 100us */ + u16 req_fiv; + /* cache for REG_DBG_AUTOALG_EN register */ + u16 auto_alg; + + struct s5k5baf_ctrls ctrls; + + unsigned int streaming:1; + unsigned int apply_cfg:1; + unsigned int apply_crop:1; + unsigned int valid_auto_alg:1; + unsigned int power; +}; + +static const struct s5k5baf_pixfmt s5k5baf_formats[] = { + { V4L2_MBUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_JPEG, 5 }, + /* range 16-240 */ + { V4L2_MBUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_REC709, 6 }, + { V4L2_MBUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_JPEG, 0 }, +}; + +static struct v4l2_rect s5k5baf_cis_rect = { + 0, 0, S5K5BAF_CIS_WIDTH, S5K5BAF_CIS_HEIGHT +}; + +/* Setfile contains set of I2C command sequences. Each sequence has its ID. + * setfile format: + * u8 magic[4]; + * u16 count; number of sequences + * struct { + * u16 id; sequence id + * u16 offset; sequence offset in data array + * } seq[count]; + * u16 data[*]; array containing sequences + * + */ +static int s5k5baf_fw_parse(struct device *dev, struct s5k5baf_fw **fw, + size_t count, const u16 *data) +{ + struct s5k5baf_fw *f; + u16 *d, i, *end; + int ret; + + if (count < S5K5BAG_FW_TAG_LEN + 1) { + dev_err(dev, "firmware file too short (%d)\n", count); + return -EINVAL; + } + + ret = memcmp(data, S5K5BAF_FW_TAG, S5K5BAG_FW_TAG_LEN * sizeof(u16)); + if (ret != 0) { + dev_err(dev, "invalid firmware magic number\n"); + return -EINVAL; + } + + data += S5K5BAG_FW_TAG_LEN; + count -= S5K5BAG_FW_TAG_LEN; + + d = devm_kzalloc(dev, count * sizeof(u16), GFP_KERNEL); + + for (i = 0; i < count; ++i) + d[i] = le16_to_cpu(data[i]); + + f = (struct s5k5baf_fw *)d; + if (count < 1 + 2 * f->count) { + dev_err(dev, "invalid firmware header (count=%d size=%d)\n", + f->count, 2 * (count + S5K5BAG_FW_TAG_LEN)); + return -EINVAL; + } + end = d + count; + d += 1 + 2 * f->count; + + for (i = 0; i < f->count; ++i) { + if (f->seq[i].offset + d <= end) + continue; + dev_err(dev, "invalid firmware header (seq=%d)\n", i); + return -EINVAL; + } + + *fw = f; + + return 0; +} + +static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct s5k5baf, ctrls.handler)->sd; +} + +static inline bool s5k5baf_is_cis_subdev(struct v4l2_subdev *sd) +{ + return sd->entity.type == MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; +} + +static inline struct s5k5baf *to_s5k5baf(struct v4l2_subdev *sd) +{ + if (s5k5baf_is_cis_subdev(sd)) + return container_of(sd, struct s5k5baf, cis_sd); + else + return container_of(sd, struct s5k5baf, sd); +} + +static u16 s5k5baf_i2c_read(struct s5k5baf *state, u16 addr) +{ + struct i2c_client *c = v4l2_get_subdevdata(&state->sd); + __be16 w, r; + struct i2c_msg msg[] = { + { .addr = c->addr, .flags = 0, + .len = 2, .buf = (u8 *)&w }, + { .addr = c->addr, .flags = I2C_M_RD, + .len = 2, .buf = (u8 *)&r }, + }; + int ret; + + if (state->error) + return 0; + + w = cpu_to_be16(addr); + ret = i2c_transfer(c->adapter, msg, 2); + r = be16_to_cpu(r); + + v4l2_dbg(3, debug, c, "i2c_read: 0x%04x : 0x%04x\n", addr, r); + + if (ret != 2) { + v4l2_err(c, "i2c_read: error during transfer (%d)\n", ret); + state->error = ret; + } + return r; +} + +static void s5k5baf_i2c_write(struct s5k5baf *state, u16 addr, u16 val) +{ + u8 buf[4] = { addr >> 8, addr & 0xFF, val >> 8, val & 0xFF }; + struct i2c_client *c = v4l2_get_subdevdata(&state->sd); + int ret; + + if (state->error) + return; + + ret = i2c_master_send(c, buf, 4); + v4l2_dbg(3, debug, c, "i2c_write: 0x%04x : 0x%04x\n", addr, val); + + if (ret != 4) { + v4l2_err(c, "i2c_write: error during transfer (%d)\n", ret); + state->error = ret; + } +} + +static u16 s5k5baf_read(struct s5k5baf *state, u16 addr) +{ + s5k5baf_i2c_write(state, REG_CMDRD_ADDR, addr); + return s5k5baf_i2c_read(state, REG_CMD_BUF); +} + +static void s5k5baf_write(struct s5k5baf *state, u16 addr, u16 val) +{ + s5k5baf_i2c_write(state, REG_CMDWR_ADDR, addr); + s5k5baf_i2c_write(state, REG_CMD_BUF, val); +} + +static void s5k5baf_write_arr_seq(struct s5k5baf *state, u16 addr, + u16 count, const u16 *seq) +{ + struct i2c_client *c = v4l2_get_subdevdata(&state->sd); + __be16 buf[count + 1]; + int ret, n; + + s5k5baf_i2c_write(state, REG_CMDWR_ADDR, addr); + if (state->error) + return; + + buf[0] = __constant_cpu_to_be16(REG_CMD_BUF); + for (n = 1; n <= count; ++n) + buf[n] = cpu_to_be16(*seq++); + + n *= 2; + ret = i2c_master_send(c, (char *)buf, n); + v4l2_dbg(3, debug, c, "i2c_write_seq(count=%d): %*ph\n", count, + min(2 * count, 64), seq - count); + + if (ret != n) { + v4l2_err(c, "i2c_write_seq: error during transfer (%d)\n", ret); + state->error = ret; + } +} + +#define s5k5baf_write_seq(state, addr, seq...) \ + s5k5baf_write_arr_seq(state, addr, sizeof((char[]){ seq }), \ + (const u16 []){ seq }); + +/* add items count at the beginning of the list */ +#define NSEQ(seq...) sizeof((char[]){ seq }), seq + +/* + * s5k5baf_write_nseq() - Writes sequences of values to sensor memory via i2c + * @nseq: sequence of u16 words in format: + * (N, address, value[1]...value[N-1])*,0 + * Ex.: + * u16 seq[] = { NSEQ(0x4000, 1, 1), NSEQ(0x4010, 640, 480), 0 }; + * ret = s5k5baf_write_nseq(c, seq); + */ +static void s5k5baf_write_nseq(struct s5k5baf *state, const u16 *nseq) +{ + int count; + + while ((count = *nseq++)) { + u16 addr = *nseq++; + --count; + + s5k5baf_write_arr_seq(state, addr, count, nseq); + nseq += count; + } +} + +static void s5k5baf_synchronize(struct s5k5baf *state, int timeout, u16 addr) +{ + unsigned long end = jiffies + msecs_to_jiffies(timeout); + u16 reg; + + s5k5baf_write(state, addr, 1); + do { + reg = s5k5baf_read(state, addr); + if (state->error || !reg) + return; + usleep_range(5000, 10000); + } while (time_is_after_jiffies(end)); + + v4l2_err(&state->sd, "timeout on register synchronize (%#x)\n", addr); + state->error = -ETIMEDOUT; +} + +static u16 *s5k5baf_fw_get_seq(struct s5k5baf *state, u16 seq_id) +{ + struct s5k5baf_fw *fw = state->fw; + u16 *data = fw->data + 2 * fw->count; + int i; + + if (fw == NULL) + return NULL; + + for (i = 0; i < fw->count; ++i) { + if (fw->seq[i].id == seq_id) + return data + fw->seq[i].offset; + } + + return NULL; +} + +static void s5k5baf_hw_patch(struct s5k5baf *state) +{ + u16 *seq = s5k5baf_fw_get_seq(state, S5K5BAF_FW_ID_PATCH); + + if (seq) + s5k5baf_write_nseq(state, seq); +} + +static void s5k5baf_hw_set_clocks(struct s5k5baf *state) +{ + unsigned long mclk = state->mclk_frequency / 1000; + u16 status; + static const u16 nseq_clk_cfg[] = { + NSEQ(REG_I_USE_NPVI_CLOCKS, + NPVI_CLOCKS, NMIPI_CLOCKS, 0, + SCLK_PVI_FREQ / 4, PCLK_MIN_FREQ / 4, PCLK_MAX_FREQ / 4, + SCLK_MIPI_FREQ / 4, PCLK_MIN_FREQ / 4, PCLK_MAX_FREQ / 4), + NSEQ(REG_I_USE_REGS_API, 1), + 0 + }; + + s5k5baf_write_seq(state, REG_I_INCLK_FREQ_L, mclk & 0xffff, mclk >> 16); + s5k5baf_write_nseq(state, nseq_clk_cfg); + + s5k5baf_synchronize(state, 250, REG_I_INIT_PARAMS_UPDATED); + status = s5k5baf_read(state, REG_I_ERROR_INFO); + if (!state->error && status) { + v4l2_err(&state->sd, "error configuring PLL (%d)\n", status); + state->error = -EINVAL; + } +} + +/* set custom color correction matrices for various illuminations */ +static void s5k5baf_hw_set_ccm(struct s5k5baf *state) +{ + u16 *seq = s5k5baf_fw_get_seq(state, S5K5BAF_FW_ID_CCM); + + if (seq) + s5k5baf_write_nseq(state, seq); +} + +/* CIS sensor tuning, based on undocumented android driver code */ +static void s5k5baf_hw_set_cis(struct s5k5baf *state) +{ + u16 *seq = s5k5baf_fw_get_seq(state, S5K5BAF_FW_ID_CIS); + + if (!seq) + return; + + s5k5baf_i2c_write(state, REG_CMDWR_PAGE, PAGE_IF_HW); + s5k5baf_write_nseq(state, seq); + s5k5baf_i2c_write(state, REG_CMDWR_PAGE, PAGE_IF_SW); +} + +static void s5k5baf_hw_sync_cfg(struct s5k5baf *state) +{ + s5k5baf_write(state, REG_G_PREV_CFG_CHG, 1); + if (state->apply_crop) { + s5k5baf_write(state, REG_G_INPUTS_CHANGE_REQ, 1); + s5k5baf_write(state, REG_G_PREV_CFG_BYPASS_CHANGED, 1); + } + s5k5baf_synchronize(state, 500, REG_G_NEW_CFG_SYNC); +} +/* Set horizontal and vertical image flipping */ +static void s5k5baf_hw_set_mirror(struct s5k5baf *state) +{ + u16 flip = state->ctrls.vflip->val | (state->ctrls.vflip->val << 1); + + s5k5baf_write(state, REG_P_PREV_MIRROR(0), flip); + if (state->streaming) + s5k5baf_hw_sync_cfg(state); +} + +static void s5k5baf_hw_set_alg(struct s5k5baf *state, u16 alg, bool enable) +{ + u16 cur_alg, new_alg; + + if (!state->valid_auto_alg) + cur_alg = s5k5baf_read(state, REG_DBG_AUTOALG_EN); + else + cur_alg = state->auto_alg; + + new_alg = enable ? (cur_alg | alg) : (cur_alg & ~alg); + + if (new_alg != cur_alg) + s5k5baf_write(state, REG_DBG_AUTOALG_EN, new_alg); + + if (state->error) + return; + + state->valid_auto_alg = 1; + state->auto_alg = new_alg; +} + +/* Configure auto/manual white balance and R/G/B gains */ +static void s5k5baf_hw_set_awb(struct s5k5baf *state, int awb) +{ + struct s5k5baf_ctrls *ctrls = &state->ctrls; + + if (!awb) + s5k5baf_write_seq(state, REG_SF_RGAIN, + ctrls->gain_red->val, 1, + S5K5BAF_GAIN_GREEN_DEF, 1, + ctrls->gain_blue->val, 1, + 1); + + s5k5baf_hw_set_alg(state, AALG_WB_EN, awb); +} + +/* Program FW with exposure time, 'exposure' in us units */ +static void s5k5baf_hw_set_user_exposure(struct s5k5baf *state, int exposure) +{ + unsigned int time = exposure / 10; + + s5k5baf_write_seq(state, REG_SF_USR_EXPOSURE_L, + time & 0xffff, time >> 16, 1); +} + +static void s5k5baf_hw_set_user_gain(struct s5k5baf *state, int gain) +{ + s5k5baf_write_seq(state, REG_SF_USR_TOT_GAIN, gain, 1); +} + +/* Set auto/manual exposure and total gain */ +static void s5k5baf_hw_set_auto_exposure(struct s5k5baf *state, int value) +{ + if (value == V4L2_EXPOSURE_AUTO) { + s5k5baf_hw_set_alg(state, AALG_AE_EN | AALG_DIVLEI_EN, true); + } else { + unsigned int exp_time = state->ctrls.exposure->val; + + s5k5baf_hw_set_user_exposure(state, exp_time); + s5k5baf_hw_set_user_gain(state, state->ctrls.gain->val); + s5k5baf_hw_set_alg(state, AALG_AE_EN | AALG_DIVLEI_EN, false); + } +} + +static void s5k5baf_hw_set_anti_flicker(struct s5k5baf *state, int v) +{ + if (v == V4L2_CID_POWER_LINE_FREQUENCY_AUTO) { + s5k5baf_hw_set_alg(state, AALG_FLICKER_EN, true); + } else { + /* The V4L2_CID_LINE_FREQUENCY control values match + * the register values */ + s5k5baf_write_seq(state, REG_SF_FLICKER_QUANT, v, 1); + s5k5baf_hw_set_alg(state, AALG_FLICKER_EN, false); + } +} + +static void s5k5baf_hw_set_colorfx(struct s5k5baf *state, int val) +{ + static const u16 colorfx[] = { + [V4L2_COLORFX_NONE] = 0, + [V4L2_COLORFX_BW] = 1, + [V4L2_COLORFX_NEGATIVE] = 2, + [V4L2_COLORFX_SEPIA] = 3, + [V4L2_COLORFX_SKY_BLUE] = 4, + [V4L2_COLORFX_SKETCH] = 5, + }; + + s5k5baf_write(state, REG_G_SPEC_EFFECTS, colorfx[val]); +} + +static int s5k5baf_find_pixfmt(struct v4l2_mbus_framefmt *mf) +{ + int i, c = -1; + + for (i = 0; i < ARRAY_SIZE(s5k5baf_formats); i++) { + if (mf->colorspace != s5k5baf_formats[i].colorspace) + continue; + if (mf->code == s5k5baf_formats[i].code) + return i; + if (c < 0) + c = i; + } + return (c < 0) ? 0 : c; +} + +static int s5k5baf_clear_error(struct s5k5baf *state) +{ + int ret = state->error; + + state->error = 0; + return ret; +} + +static int s5k5baf_hw_set_video_bus(struct s5k5baf *state) +{ + u16 en_pkts; + + if (state->bus_type == V4L2_MBUS_CSI2) + en_pkts = EN_PACKETS_CSI2; + else + en_pkts = 0; + + s5k5baf_write_seq(state, REG_OIF_EN_MIPI_LANES, + state->nlanes, en_pkts, 1); + + return s5k5baf_clear_error(state); +} + +static u16 s5k5baf_get_cfg_error(struct s5k5baf *state) +{ + u16 err = s5k5baf_read(state, REG_G_PREV_CFG_ERROR); + if (err) + s5k5baf_write(state, REG_G_PREV_CFG_ERROR, 0); + return err; +} + +static void s5k5baf_hw_set_fiv(struct s5k5baf *state, u16 fiv) +{ + s5k5baf_write(state, REG_P_MAX_FR_TIME(0), fiv); + s5k5baf_hw_sync_cfg(state); +} + +static void s5k5baf_hw_find_min_fiv(struct s5k5baf *state) +{ + u16 err, fiv; + int n; + + fiv = s5k5baf_read(state, REG_G_ACTUAL_P_FR_TIME); + if (state->error) + return; + + for (n = 5; n > 0; --n) { + s5k5baf_hw_set_fiv(state, fiv); + err = s5k5baf_get_cfg_error(state); + if (state->error) + return; + switch (err) { + case CFG_ERROR_RANGE: + ++fiv; + break; + case 0: + state->fiv = fiv; + v4l2_info(&state->sd, + "found valid frame interval: %d00us\n", fiv); + return; + default: + v4l2_err(&state->sd, + "error setting frame interval: %d\n", err); + state->error = -EINVAL; + } + }; + v4l2_err(&state->sd, "cannot find correct frame interval\n"); + state->error = -ERANGE; +} + +static void s5k5baf_hw_validate_cfg(struct s5k5baf *state) +{ + u16 err; + + err = s5k5baf_get_cfg_error(state); + if (state->error) + return; + + switch (err) { + case 0: + state->apply_cfg = 1; + return; + case CFG_ERROR_RANGE: + s5k5baf_hw_find_min_fiv(state); + if (!state->error) + state->apply_cfg = 1; + return; + default: + v4l2_err(&state->sd, + "error setting format: %d\n", err); + state->error = -EINVAL; + } +} + +static void s5k5baf_rescale(struct v4l2_rect *r, const struct v4l2_rect *v, + const struct v4l2_rect *n, + const struct v4l2_rect *d) +{ + r->left = v->left * n->width / d->width; + r->top = v->top * n->height / d->height; + r->width = v->width * n->width / d->width; + r->height = v->height * n->height / d->height; +} + +static int s5k5baf_hw_set_crop_rects(struct s5k5baf *state) +{ + struct v4l2_rect *p, r; + u16 err; + int ret; + + p = &state->crop_sink; + s5k5baf_write_seq(state, REG_G_PREVREQ_IN_WIDTH, p->width, p->height, + p->left, p->top); + + s5k5baf_rescale(&r, &state->crop_source, &state->crop_sink, + &state->compose); + s5k5baf_write_seq(state, REG_G_PREVZOOM_IN_WIDTH, r.width, r.height, + r.left, r.top); + + s5k5baf_synchronize(state, 500, REG_G_INPUTS_CHANGE_REQ); + s5k5baf_synchronize(state, 500, REG_G_PREV_CFG_BYPASS_CHANGED); + err = s5k5baf_get_cfg_error(state); + ret = s5k5baf_clear_error(state); + if (ret < 0) + return ret; + + switch (err) { + case 0: + break; + case CFG_ERROR_RANGE: + /* retry crop with frame interval set to max */ + s5k5baf_hw_set_fiv(state, S5K5BAF_MAX_FR_TIME); + err = s5k5baf_get_cfg_error(state); + ret = s5k5baf_clear_error(state); + if (ret < 0) + return ret; + if (err) { + v4l2_err(&state->sd, + "crop error on max frame interval: %d\n", err); + state->error = -EINVAL; + } + s5k5baf_hw_set_fiv(state, state->req_fiv); + s5k5baf_hw_validate_cfg(state); + break; + default: + v4l2_err(&state->sd, "crop error: %d\n", err); + return -EINVAL; + } + + if (!state->apply_cfg) + return 0; + + p = &state->crop_source; + s5k5baf_write_seq(state, REG_P_OUT_WIDTH(0), p->width, p->height); + s5k5baf_hw_set_fiv(state, state->req_fiv); + s5k5baf_hw_validate_cfg(state); + + return s5k5baf_clear_error(state); +} + +static void s5k5baf_hw_set_config(struct s5k5baf *state) +{ + u16 reg_fmt = s5k5baf_formats[state->pixfmt].reg_p_fmt; + struct v4l2_rect *r = &state->crop_source; + + s5k5baf_write_seq(state, REG_P_OUT_WIDTH(0), + r->width, r->height, reg_fmt, + PCLK_MAX_FREQ >> 2, PCLK_MIN_FREQ >> 2, + PVI_MASK_MIPI, CLK_MIPI_INDEX, + FR_RATE_FIXED, FR_RATE_Q_DYNAMIC, + state->req_fiv, S5K5BAF_MIN_FR_TIME); + s5k5baf_hw_sync_cfg(state); + s5k5baf_hw_validate_cfg(state); +} + + +static void s5k5baf_hw_set_test_pattern(struct s5k5baf *state, int id) +{ + s5k5baf_i2c_write(state, REG_PATTERN_WIDTH, 800); + s5k5baf_i2c_write(state, REG_PATTERN_HEIGHT, 511); + s5k5baf_i2c_write(state, REG_PATTERN_PARAM, 0); + s5k5baf_i2c_write(state, REG_PATTERN_SET, id); +} + +static void s5k5baf_gpio_assert(struct s5k5baf *state, int id) +{ + struct s5k5baf_gpio *gpio = &state->gpios[id]; + + gpio_set_value(gpio->gpio, gpio->level); +} + +static void s5k5baf_gpio_deassert(struct s5k5baf *state, int id) +{ + struct s5k5baf_gpio *gpio = &state->gpios[id]; + + gpio_set_value(gpio->gpio, !gpio->level); +} + +static int s5k5baf_power_on(struct s5k5baf *state) +{ + int ret; + + ret = regulator_bulk_enable(S5K5BAF_NUM_SUPPLIES, state->supplies); + if (ret < 0) + goto err; + + ret = clk_set_rate(state->clock, state->mclk_frequency); + if (ret < 0) + goto err_reg_dis; + + ret = clk_prepare_enable(state->clock); + if (ret < 0) + goto err_reg_dis; + + v4l2_dbg(1, debug, &state->sd, "clock frequency: %ld\n", + clk_get_rate(state->clock)); + + s5k5baf_gpio_deassert(state, STBY); + usleep_range(50, 100); + s5k5baf_gpio_deassert(state, RST); + return 0; + +err_reg_dis: + regulator_bulk_disable(S5K5BAF_NUM_SUPPLIES, state->supplies); +err: + v4l2_err(&state->sd, "%s() failed (%d)\n", __func__, ret); + return ret; +} + +static int s5k5baf_power_off(struct s5k5baf *state) +{ + int ret; + + state->streaming = 0; + state->apply_cfg = 0; + state->apply_crop = 0; + + s5k5baf_gpio_assert(state, RST); + s5k5baf_gpio_assert(state, STBY); + + if (!IS_ERR(state->clock)) + clk_disable_unprepare(state->clock); + + ret = regulator_bulk_disable(S5K5BAF_NUM_SUPPLIES, + state->supplies); + if (ret < 0) + v4l2_err(&state->sd, "failed to disable regulators\n"); + + return 0; +} + +static void s5k5baf_hw_init(struct s5k5baf *state) +{ + s5k5baf_i2c_write(state, AHB_MSB_ADDR_PTR, PAGE_IF_HW); + s5k5baf_i2c_write(state, REG_CLEAR_HOST_INT, 0); + s5k5baf_i2c_write(state, REG_SW_LOAD_COMPLETE, 1); + s5k5baf_i2c_write(state, REG_CMDRD_PAGE, PAGE_IF_SW); + s5k5baf_i2c_write(state, REG_CMDWR_PAGE, PAGE_IF_SW); +} + +/* + * V4L2 subdev core and video operations + */ + +static void s5k5baf_initialize_data(struct s5k5baf *state) +{ + state->pixfmt = 0; + state->req_fiv = 10000 / 15; + state->fiv = state->req_fiv; + state->valid_auto_alg = 0; +} + +static int s5k5baf_load_setfile(struct s5k5baf *state) +{ + struct i2c_client *c = v4l2_get_subdevdata(&state->sd); + const struct firmware *fw; + int ret; + + ret = request_firmware(&fw, S5K5BAF_FW_FILENAME, &c->dev); + if (ret < 0) { + dev_warn(&c->dev, "firmware file (%s) not loaded\n", + S5K5BAF_FW_FILENAME); + return ret; + } + + ret = s5k5baf_fw_parse(&c->dev, &state->fw, fw->size / 2, + (u16 *)fw->data); + + release_firmware(fw); + + return ret; +} + +static int s5k5baf_set_power(struct v4l2_subdev *sd, int on) +{ + struct s5k5baf *state = to_s5k5baf(sd); + int ret = 0; + + mutex_lock(&state->lock); + + if (!on != state->power) + goto out; + + if (on) { + if (state->fw == NULL) + s5k5baf_load_setfile(state); + + s5k5baf_initialize_data(state); + ret = s5k5baf_power_on(state); + if (ret < 0) + goto out; + + s5k5baf_hw_init(state); + s5k5baf_hw_patch(state); + s5k5baf_i2c_write(state, REG_SET_HOST_INT, 1); + s5k5baf_hw_set_clocks(state); + + ret = s5k5baf_hw_set_video_bus(state); + if (ret < 0) + goto out; + + s5k5baf_hw_set_cis(state); + s5k5baf_hw_set_ccm(state); + + ret = s5k5baf_clear_error(state); + if (!ret) + state->power++; + } else { + s5k5baf_power_off(state); + state->power--; + } + +out: + mutex_unlock(&state->lock); + + if (!ret && on) + ret = v4l2_ctrl_handler_setup(&state->ctrls.handler); + + return ret; +} + +static void s5k5baf_hw_set_stream(struct s5k5baf *state, int enable) +{ + s5k5baf_write_seq(state, REG_G_ENABLE_PREV, enable, 1); +} + +static int s5k5baf_s_stream(struct v4l2_subdev *sd, int on) +{ + struct s5k5baf *state = to_s5k5baf(sd); + int ret; + + mutex_lock(&state->lock); + + if (state->streaming == !!on) { + ret = 0; + goto out; + } + + if (on) { + s5k5baf_hw_set_config(state); + ret = s5k5baf_hw_set_crop_rects(state); + if (ret < 0) + goto out; + s5k5baf_hw_set_stream(state, 1); + s5k5baf_i2c_write(state, 0xb0cc, 0x000b); + } else { + s5k5baf_hw_set_stream(state, 0); + } + ret = s5k5baf_clear_error(state); + if (!ret) + state->streaming = !state->streaming; + +out: + mutex_unlock(&state->lock); + + return ret; +} + +static int s5k5baf_g_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *fi) +{ + struct s5k5baf *state = to_s5k5baf(sd); + + mutex_lock(&state->lock); + fi->interval.numerator = state->fiv; + fi->interval.denominator = 10000; + mutex_unlock(&state->lock); + + return 0; +} + +static void s5k5baf_set_frame_interval(struct s5k5baf *state, + struct v4l2_subdev_frame_interval *fi) +{ + struct v4l2_fract *i = &fi->interval; + + if (fi->interval.denominator == 0) + state->req_fiv = S5K5BAF_MAX_FR_TIME; + else + state->req_fiv = clamp_t(u32, + i->numerator * 10000 / i->denominator, + S5K5BAF_MIN_FR_TIME, + S5K5BAF_MAX_FR_TIME); + + state->fiv = state->req_fiv; + if (state->apply_cfg) { + s5k5baf_hw_set_fiv(state, state->req_fiv); + s5k5baf_hw_validate_cfg(state); + } + *i = (struct v4l2_fract){ state->fiv, 10000 }; + if (state->fiv == state->req_fiv) + v4l2_info(&state->sd, "frame interval changed to %d00us\n", + state->fiv); +} + +static int s5k5baf_s_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *fi) +{ + struct s5k5baf *state = to_s5k5baf(sd); + + mutex_lock(&state->lock); + s5k5baf_set_frame_interval(state, fi); + mutex_unlock(&state->lock); + return 0; +} + +/* + * V4L2 subdev pad level and video operations + */ +static int s5k5baf_enum_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_interval_enum *fie) +{ + if (fie->index > S5K5BAF_MAX_FR_TIME - S5K5BAF_MIN_FR_TIME || + fie->pad != PAD_CIS) + return -EINVAL; + + v4l_bound_align_image(&fie->width, S5K5BAF_WIN_WIDTH_MIN, + S5K5BAF_CIS_WIDTH, 1, + &fie->height, S5K5BAF_WIN_HEIGHT_MIN, + S5K5BAF_CIS_HEIGHT, 1, 0); + + fie->interval.numerator = S5K5BAF_MIN_FR_TIME + fie->index; + fie->interval.denominator = 10000; + + return 0; +} + +static int s5k5baf_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->pad == PAD_CIS) { + if (code->index > 0) + return -EINVAL; + code->code = V4L2_MBUS_FMT_FIXED; + return 0; + } + + if (code->index >= ARRAY_SIZE(s5k5baf_formats)) + return -EINVAL; + + code->code = s5k5baf_formats[code->index].code; + return 0; +} + +static int s5k5baf_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + int i; + + if (fse->index > 0) + return -EINVAL; + + if (fse->pad == PAD_CIS) { + fse->code = V4L2_MBUS_FMT_FIXED; + fse->min_width = S5K5BAF_CIS_WIDTH; + fse->max_width = S5K5BAF_CIS_WIDTH; + fse->min_height = S5K5BAF_CIS_HEIGHT; + fse->max_height = S5K5BAF_CIS_HEIGHT; + return 0; + } + + i = ARRAY_SIZE(s5k5baf_formats); + while (--i) + if (fse->code == s5k5baf_formats[i].code) + break; + fse->code = s5k5baf_formats[i].code; + fse->min_width = S5K5BAF_WIN_WIDTH_MIN; + fse->max_width = S5K5BAF_CIS_WIDTH; + fse->max_height = S5K5BAF_WIN_HEIGHT_MIN; + fse->min_height = S5K5BAF_CIS_HEIGHT; + + return 0; +} + +static void s5k5baf_try_cis_format(struct v4l2_mbus_framefmt *mf) +{ + mf->width = S5K5BAF_CIS_WIDTH; + mf->height = S5K5BAF_CIS_HEIGHT; + mf->code = V4L2_MBUS_FMT_FIXED; + mf->colorspace = V4L2_COLORSPACE_JPEG; + mf->field = V4L2_FIELD_NONE; +} + +static int s5k5baf_try_isp_format(struct v4l2_mbus_framefmt *mf) +{ + int pixfmt; + + v4l_bound_align_image(&mf->width, S5K5BAF_WIN_WIDTH_MIN, + S5K5BAF_CIS_WIDTH, 1, + &mf->height, S5K5BAF_WIN_HEIGHT_MIN, + S5K5BAF_CIS_HEIGHT, 1, 0); + + pixfmt = s5k5baf_find_pixfmt(mf); + + mf->colorspace = s5k5baf_formats[pixfmt].colorspace; + mf->code = s5k5baf_formats[pixfmt].code; + mf->field = V4L2_FIELD_NONE; + + return pixfmt; +} + +static int s5k5baf_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct s5k5baf *state = to_s5k5baf(sd); + const struct s5k5baf_pixfmt *pixfmt; + struct v4l2_mbus_framefmt *mf; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + mf = v4l2_subdev_get_try_format(fh, fmt->pad); + fmt->format = *mf; + return 0; + } + + mf = &fmt->format; + if (fmt->pad == PAD_CIS) { + s5k5baf_try_cis_format(mf); + return 0; + } + mf->field = V4L2_FIELD_NONE; + mutex_lock(&state->lock); + pixfmt = &s5k5baf_formats[state->pixfmt]; + mf->width = state->crop_source.width; + mf->height = state->crop_source.height; + mf->code = pixfmt->code; + mf->colorspace = pixfmt->colorspace; + mutex_unlock(&state->lock); + + return 0; +} + +static int s5k5baf_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct v4l2_mbus_framefmt *mf = &fmt->format; + struct s5k5baf *state = to_s5k5baf(sd); + const struct s5k5baf_pixfmt *pixfmt; + int ret = 0; + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { + *v4l2_subdev_get_try_format(fh, fmt->pad) = *mf; + return 0; + } + + if (fmt->pad == PAD_CIS) { + s5k5baf_try_cis_format(mf); + return 0; + } + + mutex_lock(&state->lock); + + if (state->streaming) { + mutex_unlock(&state->lock); + return -EBUSY; + } + + state->pixfmt = s5k5baf_try_isp_format(mf); + pixfmt = &s5k5baf_formats[state->pixfmt]; + mf->code = pixfmt->code; + mf->colorspace = pixfmt->colorspace; + mf->width = state->crop_source.width; + mf->height = state->crop_source.height; + + mutex_unlock(&state->lock); + return ret; +} + +enum selection_rect { R_CIS, R_CROP_SINK, R_COMPOSE, R_CROP_SOURCE, R_INVALID }; + +static enum selection_rect s5k5baf_get_sel_rect(u32 pad, u32 target) +{ + switch (target) { + case V4L2_SEL_TGT_CROP_BOUNDS: + return pad ? R_COMPOSE : R_CIS; + case V4L2_SEL_TGT_CROP: + return pad ? R_CROP_SOURCE : R_CROP_SINK; + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + return pad ? R_INVALID : R_CROP_SINK; + case V4L2_SEL_TGT_COMPOSE: + return pad ? R_INVALID : R_COMPOSE; + default: + return R_INVALID; + } +} + +static int s5k5baf_is_bound_target(u32 target) +{ + return (target == V4L2_SEL_TGT_CROP_BOUNDS || + target == V4L2_SEL_TGT_COMPOSE_BOUNDS); +} + +static int s5k5baf_get_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + static enum selection_rect rtype; + struct s5k5baf *state = to_s5k5baf(sd); + + rtype = s5k5baf_get_sel_rect(sel->pad, sel->target); + + switch (rtype) { + case R_INVALID: + return -EINVAL; + case R_CIS: + sel->r = s5k5baf_cis_rect; + return 0; + default: + break; + } + + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { + if (rtype == R_COMPOSE) + sel->r = *v4l2_subdev_get_try_compose(fh, sel->pad); + else + sel->r = *v4l2_subdev_get_try_crop(fh, sel->pad); + return 0; + } + + mutex_lock(&state->lock); + switch (rtype) { + case R_CROP_SINK: + sel->r = state->crop_sink; + break; + case R_COMPOSE: + sel->r = state->compose; + break; + case R_CROP_SOURCE: + sel->r = state->crop_source; + break; + default: + break; + } + if (s5k5baf_is_bound_target(sel->target)) { + sel->r.left = 0; + sel->r.top = 0; + } + mutex_unlock(&state->lock); + + return 0; +} + +/* bounds range [start, start+len) to [0, max) and aligns to 2 */ +static void s5k5baf_bound_range(u32 *start, u32 *len, u32 max) +{ + if (*len > max) + *len = max; + if (*start + *len > max) + *start = max - *len; + *start &= ~1; + *len &= ~1; + if (*len < S5K5BAF_WIN_WIDTH_MIN) + *len = S5K5BAF_WIN_WIDTH_MIN; +} + +static void s5k5baf_bound_rect(struct v4l2_rect *r, u32 width, u32 height) +{ + s5k5baf_bound_range(&r->left, &r->width, width); + s5k5baf_bound_range(&r->top, &r->height, height); +} + +static void s5k5baf_set_rect_and_adjust(struct v4l2_rect **rects, + enum selection_rect first, + struct v4l2_rect *v) +{ + struct v4l2_rect *r, *br; + enum selection_rect i = first; + + *rects[first] = *v; + do { + r = rects[i]; + br = rects[i - 1]; + s5k5baf_bound_rect(r, br->width, br->height); + } while (++i != R_INVALID); + *v = *rects[first]; +} + +static bool s5k5baf_cmp_rect(const struct v4l2_rect *r1, + const struct v4l2_rect *r2) +{ + return !memcmp(r1, r2, sizeof(*r1)); +} + +static int s5k5baf_set_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_selection *sel) +{ + static enum selection_rect rtype; + struct s5k5baf *state = to_s5k5baf(sd); + struct v4l2_rect **rects; + int ret = 0; + + rtype = s5k5baf_get_sel_rect(sel->pad, sel->target); + if (rtype == R_INVALID || s5k5baf_is_bound_target(sel->target)) + return -EINVAL; + + /* allow only scaling on compose */ + if (rtype == R_COMPOSE) { + sel->r.left = 0; + sel->r.top = 0; + } + + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { + rects = (struct v4l2_rect * []) { + &s5k5baf_cis_rect, + v4l2_subdev_get_try_crop(fh, PAD_CIS), + v4l2_subdev_get_try_compose(fh, PAD_CIS), + v4l2_subdev_get_try_crop(fh, PAD_OUT) + }; + s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); + return 0; + } + + rects = (struct v4l2_rect * []) { + &s5k5baf_cis_rect, + &state->crop_sink, + &state->compose, + &state->crop_source + }; + mutex_lock(&state->lock); + if (state->streaming) { + /* adjust sel->r to avoid output resolution change */ + if (rtype < R_CROP_SOURCE) { + if (sel->r.width < state->crop_source.width) + sel->r.width = state->crop_source.width; + if (sel->r.height < state->crop_source.height) + sel->r.height = state->crop_source.height; + } else { + sel->r.width = state->crop_source.width; + sel->r.height = state->crop_source.height; + } + } + s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); + if (!s5k5baf_cmp_rect(&state->crop_sink, &s5k5baf_cis_rect) || + !s5k5baf_cmp_rect(&state->compose, &s5k5baf_cis_rect)) + state->apply_crop = 1; + if (state->streaming) + ret = s5k5baf_hw_set_crop_rects(state); + mutex_unlock(&state->lock); + + return ret; +} + +static const struct v4l2_subdev_pad_ops s5k5baf_cis_pad_ops = { + .enum_mbus_code = s5k5baf_enum_mbus_code, + .enum_frame_size = s5k5baf_enum_frame_size, + .get_fmt = s5k5baf_get_fmt, + .set_fmt = s5k5baf_set_fmt, +}; + +static const struct v4l2_subdev_pad_ops s5k5baf_pad_ops = { + .enum_mbus_code = s5k5baf_enum_mbus_code, + .enum_frame_size = s5k5baf_enum_frame_size, + .enum_frame_interval = s5k5baf_enum_frame_interval, + .get_fmt = s5k5baf_get_fmt, + .set_fmt = s5k5baf_set_fmt, + .get_selection = s5k5baf_get_selection, + .set_selection = s5k5baf_set_selection, +}; + +static const struct v4l2_subdev_video_ops s5k5baf_video_ops = { + .g_frame_interval = s5k5baf_g_frame_interval, + .s_frame_interval = s5k5baf_s_frame_interval, + .s_stream = s5k5baf_s_stream, +}; + +/* + * V4L2 subdev controls + */ + +static int s5k5baf_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = ctrl_to_sd(ctrl); + struct s5k5baf *state = to_s5k5baf(sd); + int ret; + + v4l2_dbg(1, debug, sd, "ctrl: %s, value: %d\n", ctrl->name, ctrl->val); + + mutex_lock(&state->lock); + + if (state->power == 0) + goto unlock; + + switch (ctrl->id) { + case V4L2_CID_AUTO_WHITE_BALANCE: + s5k5baf_hw_set_awb(state, ctrl->val); + break; + + case V4L2_CID_BRIGHTNESS: + s5k5baf_write(state, REG_USER_BRIGHTNESS, ctrl->val); + break; + + case V4L2_CID_COLORFX: + s5k5baf_hw_set_colorfx(state, ctrl->val); + break; + + case V4L2_CID_CONTRAST: + s5k5baf_write(state, REG_USER_CONTRAST, ctrl->val); + break; + + case V4L2_CID_EXPOSURE_AUTO: + s5k5baf_hw_set_auto_exposure(state, ctrl->val); + break; + + case V4L2_CID_HFLIP: + s5k5baf_hw_set_mirror(state); + break; + + case V4L2_CID_POWER_LINE_FREQUENCY: + s5k5baf_hw_set_anti_flicker(state, ctrl->val); + break; + + case V4L2_CID_SATURATION: + s5k5baf_write(state, REG_USER_SATURATION, ctrl->val); + break; + + case V4L2_CID_SHARPNESS: + s5k5baf_write(state, REG_USER_SHARPBLUR, ctrl->val); + break; + + case V4L2_CID_WHITE_BALANCE_TEMPERATURE: + s5k5baf_write(state, REG_P_COLORTEMP(0), ctrl->val); + if (state->apply_cfg) + s5k5baf_hw_sync_cfg(state); + break; + + case V4L2_CID_TEST_PATTERN: + s5k5baf_hw_set_test_pattern(state, ctrl->val); + break; + } +unlock: + ret = s5k5baf_clear_error(state); + mutex_unlock(&state->lock); + return ret; +} + +static const struct v4l2_ctrl_ops s5k5baf_ctrl_ops = { + .s_ctrl = s5k5baf_s_ctrl, +}; + +static const char * const s5k5baf_test_pattern_menu[] = { + "Disabled", + "Blank", + "Bars", + "Gradients", + "Textile", + "Textile2", + "Squares" +}; + +static int s5k5baf_initialize_ctrls(struct s5k5baf *state) +{ + const struct v4l2_ctrl_ops *ops = &s5k5baf_ctrl_ops; + struct s5k5baf_ctrls *ctrls = &state->ctrls; + struct v4l2_ctrl_handler *hdl = &ctrls->handler; + int ret; + + ret = v4l2_ctrl_handler_init(hdl, 16); + if (ret < 0) { + v4l2_err(&state->sd, "cannot init ctrl handler (%d)\n", ret); + return ret; + } + + /* Auto white balance cluster */ + ctrls->awb = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTO_WHITE_BALANCE, + 0, 1, 1, 1); + ctrls->gain_red = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_RED_BALANCE, + 0, 255, 1, S5K5BAF_GAIN_RED_DEF); + ctrls->gain_blue = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BLUE_BALANCE, + 0, 255, 1, S5K5BAF_GAIN_BLUE_DEF); + v4l2_ctrl_auto_cluster(3, &ctrls->awb, 0, false); + + ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, 0); + ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, 0); + v4l2_ctrl_cluster(2, &ctrls->hflip); + + ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops, + V4L2_CID_EXPOSURE_AUTO, + V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO); + /* Exposure time: x 1 us */ + ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE, + 0, 6000000U, 1, 100000U); + /* Total gain: 256 <=> 1x */ + ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN, + 0, 256, 1, 256); + v4l2_ctrl_auto_cluster(3, &ctrls->auto_exp, 0, false); + + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_POWER_LINE_FREQUENCY, + V4L2_CID_POWER_LINE_FREQUENCY_AUTO, 0, + V4L2_CID_POWER_LINE_FREQUENCY_AUTO); + + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_COLORFX, + V4L2_COLORFX_SKY_BLUE, ~0x6f, V4L2_COLORFX_NONE); + + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_WHITE_BALANCE_TEMPERATURE, + 0, 256, 1, 0); + + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -127, 127, 1, 0); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -127, 127, 1, 0); + + v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(s5k5baf_test_pattern_menu) - 1, + 0, 0, s5k5baf_test_pattern_menu); + + if (hdl->error) { + v4l2_err(&state->sd, "error creating controls (%d)\n", + hdl->error); + ret = hdl->error; + v4l2_ctrl_handler_free(hdl); + return ret; + } + + state->sd.ctrl_handler = hdl; + return 0; +} + +/* + * V4L2 subdev internal operations + */ +static int s5k5baf_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *mf; + + mf = v4l2_subdev_get_try_format(fh, PAD_CIS); + s5k5baf_try_cis_format(mf); + + if (s5k5baf_is_cis_subdev(sd)) + return 0; + + mf = v4l2_subdev_get_try_format(fh, PAD_OUT); + mf->colorspace = s5k5baf_formats[0].colorspace; + mf->code = s5k5baf_formats[0].code; + mf->width = s5k5baf_cis_rect.width; + mf->height = s5k5baf_cis_rect.height; + mf->field = V4L2_FIELD_NONE; + + *v4l2_subdev_get_try_crop(fh, PAD_CIS) = s5k5baf_cis_rect; + *v4l2_subdev_get_try_compose(fh, PAD_CIS) = s5k5baf_cis_rect; + *v4l2_subdev_get_try_crop(fh, PAD_OUT) = s5k5baf_cis_rect; + + return 0; +} + +static int s5k5baf_check_fw_revision(struct s5k5baf *state) +{ + u16 api_ver = 0, fw_rev = 0, s_id = 0; + int ret; + + api_ver = s5k5baf_read(state, REG_FW_APIVER); + fw_rev = s5k5baf_read(state, REG_FW_REVISION) & 0xff; + s_id = s5k5baf_read(state, REG_FW_SENSOR_ID); + ret = s5k5baf_clear_error(state); + if (ret < 0) + return ret; + + v4l2_info(&state->sd, "FW API=%#x, revision=%#x sensor_id=%#x\n", + api_ver, fw_rev, s_id); + + if (api_ver != S5K5BAF_FW_APIVER) { + v4l2_err(&state->sd, "FW API version not supported\n"); + return -ENODEV; + } + + return 0; +} + +static int s5k5baf_registered(struct v4l2_subdev *sd) +{ + struct s5k5baf *state = to_s5k5baf(sd); + int ret; + + ret = v4l2_device_register_subdev(sd->v4l2_dev, &state->cis_sd); + if (ret < 0) + v4l2_err(sd, "failed to register subdev %s\n", + state->cis_sd.name); + else + ret = media_entity_create_link(&state->cis_sd.entity, PAD_CIS, + &state->sd.entity, PAD_CIS, + MEDIA_LNK_FL_IMMUTABLE | + MEDIA_LNK_FL_ENABLED); + return ret; +} + +static void s5k5baf_unregistered(struct v4l2_subdev *sd) +{ + struct s5k5baf *state = to_s5k5baf(sd); + v4l2_device_unregister_subdev(&state->cis_sd); +} + +static const struct v4l2_subdev_ops s5k5baf_cis_subdev_ops = { + .pad = &s5k5baf_cis_pad_ops, +}; + +static const struct v4l2_subdev_internal_ops s5k5baf_cis_subdev_internal_ops = { + .open = s5k5baf_open, +}; + +static const struct v4l2_subdev_internal_ops s5k5baf_subdev_internal_ops = { + .registered = s5k5baf_registered, + .unregistered = s5k5baf_unregistered, + .open = s5k5baf_open, +}; + +static const struct v4l2_subdev_core_ops s5k5baf_core_ops = { + .s_power = s5k5baf_set_power, + .log_status = v4l2_ctrl_subdev_log_status, +}; + +static const struct v4l2_subdev_ops s5k5baf_subdev_ops = { + .core = &s5k5baf_core_ops, + .pad = &s5k5baf_pad_ops, + .video = &s5k5baf_video_ops, +}; + +static int s5k5baf_configure_gpios(struct s5k5baf *state) +{ + static const char const *name[] = { "S5K5BAF_STBY", "S5K5BAF_RST" }; + struct i2c_client *c = v4l2_get_subdevdata(&state->sd); + struct s5k5baf_gpio *g = state->gpios; + int ret, i; + + for (i = 0; i < NUM_GPIOS; ++i) { + int flags = GPIOF_DIR_OUT; + if (g[i].level) + flags |= GPIOF_INIT_HIGH; + ret = devm_gpio_request_one(&c->dev, g[i].gpio, flags, name[i]); + if (ret < 0) { + v4l2_err(c, "failed to request gpio %s\n", name[i]); + return ret; + } + } + return 0; +} + +static int s5k5baf_parse_gpios(struct s5k5baf_gpio *gpios, struct device *dev) +{ + static const char * const names[] = { + "stbyn-gpios", + "rstn-gpios", + }; + struct device_node *node = dev->of_node; + enum of_gpio_flags flags; + int ret, i; + + for (i = 0; i < NUM_GPIOS; ++i) { + ret = of_get_named_gpio_flags(node, names[i], 0, &flags); + if (ret < 0) { + dev_err(dev, "no %s GPIO pin provided\n", names[i]); + return ret; + } + gpios[i].gpio = ret; + gpios[i].level = !(flags & OF_GPIO_ACTIVE_LOW); + } + + return 0; +} + +static int s5k5baf_parse_device_node(struct s5k5baf *state, struct device *dev) +{ + struct device_node *node = dev->of_node; + struct device_node *node_ep; + struct v4l2_of_endpoint ep; + int ret; + + if (!node) { + dev_err(dev, "no device-tree node provided\n"); + return -EINVAL; + } + + ret = of_property_read_u32(node, "clock-frequency", + &state->mclk_frequency); + if (ret < 0) { + state->mclk_frequency = S5K5BAF_DEFAULT_MCLK_FREQ; + dev_info(dev, "using default %u Hz clock frequency\n", + state->mclk_frequency); + } + + ret = s5k5baf_parse_gpios(state->gpios, dev); + if (ret < 0) + return ret; + + node_ep = v4l2_of_get_next_endpoint(node, NULL); + if (!node_ep) { + dev_err(dev, "no endpoint defined at node %s\n", + node->full_name); + return -EINVAL; + } + + v4l2_of_parse_endpoint(node_ep, &ep); + of_node_put(node_ep); + state->bus_type = ep.bus_type; + + switch (state->bus_type) { + case V4L2_MBUS_CSI2: + state->nlanes = ep.bus.mipi_csi2.num_data_lanes; + break; + case V4L2_MBUS_PARALLEL: + break; + default: + dev_err(dev, "unsupported bus in endpoint defined at node %s\n", + node->full_name); + return -EINVAL; + } + + return 0; +} + +static int s5k5baf_configure_subdevs(struct s5k5baf *state, + struct i2c_client *c) +{ + struct v4l2_subdev *sd; + int ret; + + sd = &state->cis_sd; + v4l2_subdev_init(sd, &s5k5baf_cis_subdev_ops); + sd->owner = THIS_MODULE; + v4l2_set_subdevdata(sd, state); + snprintf(sd->name, sizeof(sd->name), "S5K5BAF-CIS %d-%04x", + i2c_adapter_id(c->adapter), c->addr); + + sd->internal_ops = &s5k5baf_cis_subdev_internal_ops; + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + state->cis_pad.flags = MEDIA_PAD_FL_SOURCE; + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + ret = media_entity_init(&sd->entity, NUM_CIS_PADS, &state->cis_pad, 0); + if (ret < 0) + goto err; + + sd = &state->sd; + v4l2_i2c_subdev_init(sd, c, &s5k5baf_subdev_ops); + snprintf(sd->name, sizeof(sd->name), "S5K5BAF-ISP %d-%04x", + i2c_adapter_id(c->adapter), c->addr); + + sd->internal_ops = &s5k5baf_subdev_internal_ops; + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + state->pads[PAD_CIS].flags = MEDIA_PAD_FL_SINK; + state->pads[PAD_OUT].flags = MEDIA_PAD_FL_SOURCE; + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV; + ret = media_entity_init(&sd->entity, NUM_ISP_PADS, state->pads, 0); + + if (!ret) + return 0; + + media_entity_cleanup(&state->cis_sd.entity); +err: + dev_err(&c->dev, "cannot init media entity %s\n", sd->name); + return ret; +} + +static int s5k5baf_configure_regulators(struct s5k5baf *state) +{ + struct i2c_client *c = v4l2_get_subdevdata(&state->sd); + int ret; + int i; + + for (i = 0; i < S5K5BAF_NUM_SUPPLIES; i++) + state->supplies[i].supply = s5k5baf_supply_names[i]; + + ret = devm_regulator_bulk_get(&c->dev, S5K5BAF_NUM_SUPPLIES, + state->supplies); + if (ret < 0) + v4l2_err(c, "failed to get regulators\n"); + return ret; +} + +static int s5k5baf_probe(struct i2c_client *c, + const struct i2c_device_id *id) +{ + struct s5k5baf *state; + int ret; + + state = devm_kzalloc(&c->dev, sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + mutex_init(&state->lock); + state->crop_sink = s5k5baf_cis_rect; + state->compose = s5k5baf_cis_rect; + state->crop_source = s5k5baf_cis_rect; + + ret = s5k5baf_parse_device_node(state, &c->dev); + if (ret < 0) + return ret; + + ret = s5k5baf_configure_subdevs(state, c); + if (ret < 0) + return ret; + + ret = s5k5baf_configure_gpios(state); + if (ret < 0) + goto err_me; + + ret = s5k5baf_configure_regulators(state); + if (ret < 0) + goto err_me; + + state->clock = devm_clk_get(state->sd.dev, S5K5BAF_CLK_NAME); + if (IS_ERR(state->clock)) { + ret = -EPROBE_DEFER; + goto err_me; + } + + ret = s5k5baf_power_on(state); + if (ret < 0) { + ret = -EPROBE_DEFER; + goto err_me; + } + s5k5baf_hw_init(state); + ret = s5k5baf_check_fw_revision(state); + + s5k5baf_power_off(state); + if (ret < 0) + goto err_me; + + ret = s5k5baf_initialize_ctrls(state); + if (ret < 0) + goto err_me; + + ret = v4l2_async_register_subdev(&state->sd); + if (ret < 0) + goto err_ctrl; + + return 0; + +err_ctrl: + v4l2_ctrl_handler_free(state->sd.ctrl_handler); +err_me: + media_entity_cleanup(&state->sd.entity); + media_entity_cleanup(&state->cis_sd.entity); + return ret; +} + +static int s5k5baf_remove(struct i2c_client *c) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(c); + struct s5k5baf *state = to_s5k5baf(sd); + + v4l2_async_unregister_subdev(sd); + v4l2_ctrl_handler_free(sd->ctrl_handler); + media_entity_cleanup(&sd->entity); + + sd = &state->cis_sd; + v4l2_device_unregister_subdev(sd); + media_entity_cleanup(&sd->entity); + + return 0; +} + +static const struct i2c_device_id s5k5baf_id[] = { + { S5K5BAF_DRIVER_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, s5k5baf_id); + +static const struct of_device_id s5k5baf_of_match[] = { + { .compatible = "samsung,s5k5baf" }, + { } +}; +MODULE_DEVICE_TABLE(of, s5k5baf_of_match); + +static struct i2c_driver s5k5baf_i2c_driver = { + .driver = { + .of_match_table = s5k5baf_of_match, + .name = S5K5BAF_DRIVER_NAME + }, + .probe = s5k5baf_probe, + .remove = s5k5baf_remove, + .id_table = s5k5baf_id, +}; + +module_i2c_driver(s5k5baf_i2c_driver); + +MODULE_DESCRIPTION("Samsung S5K5BAF(X) UXGA camera driver"); +MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>"); +MODULE_LICENSE("GPL v2"); -- 1.8.3.2 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v10 1/2] s5k5baf: add camera sensor driver 2013-12-05 11:38 ` [PATCH v10 1/2] s5k5baf: add " Andrzej Hajda @ 2013-12-19 13:54 ` Sylwester Nawrocki 2013-12-19 18:33 ` Laurent Pinchart 0 siblings, 1 reply; 5+ messages in thread From: Sylwester Nawrocki @ 2013-12-19 13:54 UTC (permalink / raw) To: laurent.pinchart Cc: Andrzej Hajda, linux-media, linux-samsung-soc, devicetree, Kyungmin Park On 05/12/13 12:38, Andrzej Hajda wrote: > Driver for Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor > with embedded SoC ISP. > The driver exposes the sensor as two V4L2 subdevices: > - S5K5BAF-CIS - pure CMOS Image Sensor, fixed 1600x1200 format, > no controls. > - S5K5BAF-ISP - Image Signal Processor, formats up to 1600x1200, > pre/post ISP cropping, downscaling via selection API, controls. > > Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> > Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> > Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Hi Laurent, Does this driver look sane to you, at its 10'th version? :) If so I could send a pull request including it this week. Regards, Sylwester > --- > v10 > - bindings moved to separate patch > > v9 > - patch, ccm and cis configuration blobs moved to > firmware set files, > - minor improvements of bindings, > - cosmetic changes > > v8 > - improved description of data-lanes binding, > - added algorithm caching, > - added comments to functions, > - video bus type checking moved to probe, > - clk_get/put moved to probe, > - moved streaming checking under mutex, > - use proper functions for endian conversion, > - probe returns -EPROBE_DEFER in case it cannot get clock, > - v4l2_async_unregister_subdev is called on remove, > - cosmetic changes > > v7 > - changed description of 'clock-frequency' DT property > > v6 > - endpoint node presence is now optional, > - added asynchronous subdev registration support and clock > handling, > - use named gpios in DT bindings > > v5 > - removed hflip/vflip device tree properties > > v4 > - GPL changed to GPLv2, > - bitfields replaced by u8, > - cosmetic changes, > - corrected s_stream flow, > - gpio pins are no longer exported, > - added I2C addresses to subdev names, > - CIS subdev registration postponed after > succesfull HW initialization, > - added enums for pads, > - selections are initialized only during probe, > - default resolution changed to 1600x1200, > - state->error pattern removed from few other functions, > - entity link creation moved to registered callback. > > v3: > - narrowed state->error usage to i2c and power errors, > - private gain controls replaced by red/blue balance user controls, > - added checks to devicetree gpio node parsing > > v2: > - lower-cased driver name, > - removed underscore from regulator names, > - removed platform data code, > - v4l controls grouped in anonymous structs, > - added s5k5baf_clear_error function, > - private controls definitions moved to uapi header file, > - added v4l2-controls.h reservation for private controls, > - corrected subdev registered/unregistered code, > - .log_status sudbev op set to v4l2 helper, > - moved entity link creation to probe routines, > - added cleanup on error to probe function. > --- > MAINTAINERS | 7 + > drivers/media/i2c/Kconfig | 7 + > drivers/media/i2c/Makefile | 1 + > drivers/media/i2c/s5k5baf.c | 2043 +++++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 2058 insertions(+) > create mode 100644 drivers/media/i2c/s5k5baf.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 51cc504..2a59cc1 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -7355,6 +7355,13 @@ L: linux-media@vger.kernel.org > S: Supported > F: drivers/media/i2c/s5c73m3/* > > +SAMSUNG S5K5BAF CAMERA DRIVER > +M: Kyungmin Park <kyungmin.park@samsung.com> > +M: Andrzej Hajda <a.hajda@samsung.com> > +L: linux-media@vger.kernel.org > +S: Supported > +F: drivers/media/i2c/s5k5baf.c > + > SERIAL DRIVERS > M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > L: linux-serial@vger.kernel.org > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > index 842654d..f2ba337 100644 > --- a/drivers/media/i2c/Kconfig > +++ b/drivers/media/i2c/Kconfig > @@ -594,6 +594,13 @@ config VIDEO_S5K4ECGX > This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M > camera sensor with an embedded SoC image signal processor. > > +config VIDEO_S5K5BAF > + tristate "Samsung S5K5BAF sensor support" > + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API > + ---help--- > + This is a V4L2 sensor-level driver for Samsung S5K5BAF 2M > + camera sensor with an embedded SoC image signal processor. > + > source "drivers/media/i2c/smiapp/Kconfig" > > config VIDEO_S5C73M3 > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > index e03f177..eb2d6ea 100644 > --- a/drivers/media/i2c/Makefile > +++ b/drivers/media/i2c/Makefile > @@ -67,6 +67,7 @@ obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o > obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o > obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o > obj-$(CONFIG_VIDEO_S5K4ECGX) += s5k4ecgx.o > +obj-$(CONFIG_VIDEO_S5K5BAF) += s5k5baf.o > obj-$(CONFIG_VIDEO_S5C73M3) += s5c73m3/ > obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o > obj-$(CONFIG_VIDEO_AS3645A) += as3645a.o > diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c > new file mode 100644 > index 0000000..b1877ad > --- /dev/null > +++ b/drivers/media/i2c/s5k5baf.c > @@ -0,0 +1,2043 @@ > +/* > + * Driver for Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor > + * with embedded SoC ISP. > + * > + * Copyright (C) 2013, Samsung Electronics Co., Ltd. > + * Andrzej Hajda <a.hajda@samsung.com> > + * > + * Based on S5K6AA driver authored by Sylwester Nawrocki > + * Copyright (C) 2013, Samsung Electronics Co., Ltd. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/clk.h> > +#include <linux/delay.h> > +#include <linux/firmware.h> > +#include <linux/gpio.h> > +#include <linux/i2c.h> > +#include <linux/media.h> > +#include <linux/module.h> > +#include <linux/of_gpio.h> > +#include <linux/regulator/consumer.h> > +#include <linux/slab.h> > + > +#include <media/media-entity.h> > +#include <media/v4l2-ctrls.h> > +#include <media/v4l2-device.h> > +#include <media/v4l2-subdev.h> > +#include <media/v4l2-mediabus.h> > +#include <media/v4l2-of.h> > + > +static int debug; > +module_param(debug, int, 0644); > + > +#define S5K5BAF_DRIVER_NAME "s5k5baf" > +#define S5K5BAF_DEFAULT_MCLK_FREQ 24000000U > +#define S5K5BAF_CLK_NAME "mclk" > + > +#define S5K5BAF_FW_FILENAME "s5k5baf-cfg.bin" > +#define S5K5BAF_FW_TAG "SF00" > +#define S5K5BAG_FW_TAG_LEN 2 > +#define S5K5BAG_FW_MAX_COUNT 16 > + > +#define S5K5BAF_CIS_WIDTH 1600 > +#define S5K5BAF_CIS_HEIGHT 1200 > +#define S5K5BAF_WIN_WIDTH_MIN 8 > +#define S5K5BAF_WIN_HEIGHT_MIN 8 > +#define S5K5BAF_GAIN_RED_DEF 127 > +#define S5K5BAF_GAIN_GREEN_DEF 95 > +#define S5K5BAF_GAIN_BLUE_DEF 180 > +/* Default number of MIPI CSI-2 data lanes used */ > +#define S5K5BAF_DEF_NUM_LANES 1 > + > +#define AHB_MSB_ADDR_PTR 0xfcfc > + > +/* > + * Register interface pages (the most significant word of the address) > + */ > +#define PAGE_IF_HW 0xd000 > +#define PAGE_IF_SW 0x7000 > + > +/* > + * H/W register Interface (PAGE_IF_HW) > + */ > +#define REG_SW_LOAD_COMPLETE 0x0014 > +#define REG_CMDWR_PAGE 0x0028 > +#define REG_CMDWR_ADDR 0x002a > +#define REG_CMDRD_PAGE 0x002c > +#define REG_CMDRD_ADDR 0x002e > +#define REG_CMD_BUF 0x0f12 > +#define REG_SET_HOST_INT 0x1000 > +#define REG_CLEAR_HOST_INT 0x1030 > +#define REG_PATTERN_SET 0x3100 > +#define REG_PATTERN_WIDTH 0x3118 > +#define REG_PATTERN_HEIGHT 0x311a > +#define REG_PATTERN_PARAM 0x311c > + > +/* > + * S/W register interface (PAGE_IF_SW) > + */ > + > +/* Firmware revision information */ > +#define REG_FW_APIVER 0x012e > +#define S5K5BAF_FW_APIVER 0x0001 > +#define REG_FW_REVISION 0x0130 > +#define REG_FW_SENSOR_ID 0x0152 > + > +/* Initialization parameters */ > +/* Master clock frequency in KHz */ > +#define REG_I_INCLK_FREQ_L 0x01b8 > +#define REG_I_INCLK_FREQ_H 0x01ba > +#define MIN_MCLK_FREQ_KHZ 6000U > +#define MAX_MCLK_FREQ_KHZ 48000U > +#define REG_I_USE_NPVI_CLOCKS 0x01c6 > +#define NPVI_CLOCKS 1 > +#define REG_I_USE_NMIPI_CLOCKS 0x01c8 > +#define NMIPI_CLOCKS 1 > +#define REG_I_BLOCK_INTERNAL_PLL_CALC 0x01ca > + > +/* Clock configurations, n = 0..2. REG_I_* frequency unit is 4 kHz. */ > +#define REG_I_OPCLK_4KHZ(n) ((n) * 6 + 0x01cc) > +#define REG_I_MIN_OUTRATE_4KHZ(n) ((n) * 6 + 0x01ce) > +#define REG_I_MAX_OUTRATE_4KHZ(n) ((n) * 6 + 0x01d0) > +#define SCLK_PVI_FREQ 24000 > +#define SCLK_MIPI_FREQ 48000 > +#define PCLK_MIN_FREQ 6000 > +#define PCLK_MAX_FREQ 48000 > +#define REG_I_USE_REGS_API 0x01de > +#define REG_I_INIT_PARAMS_UPDATED 0x01e0 > +#define REG_I_ERROR_INFO 0x01e2 > + > +/* General purpose parameters */ > +#define REG_USER_BRIGHTNESS 0x01e4 > +#define REG_USER_CONTRAST 0x01e6 > +#define REG_USER_SATURATION 0x01e8 > +#define REG_USER_SHARPBLUR 0x01ea > + > +#define REG_G_SPEC_EFFECTS 0x01ee > +#define REG_G_ENABLE_PREV 0x01f0 > +#define REG_G_ENABLE_PREV_CHG 0x01f2 > +#define REG_G_NEW_CFG_SYNC 0x01f8 > +#define REG_G_PREVREQ_IN_WIDTH 0x01fa > +#define REG_G_PREVREQ_IN_HEIGHT 0x01fc > +#define REG_G_PREVREQ_IN_XOFFS 0x01fe > +#define REG_G_PREVREQ_IN_YOFFS 0x0200 > +#define REG_G_PREVZOOM_IN_WIDTH 0x020a > +#define REG_G_PREVZOOM_IN_HEIGHT 0x020c > +#define REG_G_PREVZOOM_IN_XOFFS 0x020e > +#define REG_G_PREVZOOM_IN_YOFFS 0x0210 > +#define REG_G_INPUTS_CHANGE_REQ 0x021a > +#define REG_G_ACTIVE_PREV_CFG 0x021c > +#define REG_G_PREV_CFG_CHG 0x021e > +#define REG_G_PREV_OPEN_AFTER_CH 0x0220 > +#define REG_G_PREV_CFG_ERROR 0x0222 > +#define CFG_ERROR_RANGE 0x0b > +#define REG_G_PREV_CFG_BYPASS_CHANGED 0x022a > +#define REG_G_ACTUAL_P_FR_TIME 0x023a > +#define REG_G_ACTUAL_P_OUT_RATE 0x023c > +#define REG_G_ACTUAL_C_FR_TIME 0x023e > +#define REG_G_ACTUAL_C_OUT_RATE 0x0240 > + > +/* Preview control section. n = 0...4. */ > +#define PREG(n, x) ((n) * 0x26 + x) > +#define REG_P_OUT_WIDTH(n) PREG(n, 0x0242) > +#define REG_P_OUT_HEIGHT(n) PREG(n, 0x0244) > +#define REG_P_FMT(n) PREG(n, 0x0246) > +#define REG_P_MAX_OUT_RATE(n) PREG(n, 0x0248) > +#define REG_P_MIN_OUT_RATE(n) PREG(n, 0x024a) > +#define REG_P_PVI_MASK(n) PREG(n, 0x024c) > +#define PVI_MASK_MIPI 0x52 > +#define REG_P_CLK_INDEX(n) PREG(n, 0x024e) > +#define CLK_PVI_INDEX 0 > +#define CLK_MIPI_INDEX NPVI_CLOCKS > +#define REG_P_FR_RATE_TYPE(n) PREG(n, 0x0250) > +#define FR_RATE_DYNAMIC 0 > +#define FR_RATE_FIXED 1 > +#define FR_RATE_FIXED_ACCURATE 2 > +#define REG_P_FR_RATE_Q_TYPE(n) PREG(n, 0x0252) > +#define FR_RATE_Q_DYNAMIC 0 > +#define FR_RATE_Q_BEST_FRRATE 1 /* Binning enabled */ > +#define FR_RATE_Q_BEST_QUALITY 2 /* Binning disabled */ > +/* Frame period in 0.1 ms units */ > +#define REG_P_MAX_FR_TIME(n) PREG(n, 0x0254) > +#define REG_P_MIN_FR_TIME(n) PREG(n, 0x0256) > +#define S5K5BAF_MIN_FR_TIME 333 /* x100 us */ > +#define S5K5BAF_MAX_FR_TIME 6500 /* x100 us */ > +/* The below 5 registers are for "device correction" values */ > +#define REG_P_SATURATION(n) PREG(n, 0x0258) > +#define REG_P_SHARP_BLUR(n) PREG(n, 0x025a) > +#define REG_P_GLAMOUR(n) PREG(n, 0x025c) > +#define REG_P_COLORTEMP(n) PREG(n, 0x025e) > +#define REG_P_GAMMA_INDEX(n) PREG(n, 0x0260) > +#define REG_P_PREV_MIRROR(n) PREG(n, 0x0262) > +#define REG_P_CAP_MIRROR(n) PREG(n, 0x0264) > +#define REG_P_CAP_ROTATION(n) PREG(n, 0x0266) > + > +/* Extended image property controls */ > +/* Exposure time in 10 us units */ > +#define REG_SF_USR_EXPOSURE_L 0x03bc > +#define REG_SF_USR_EXPOSURE_H 0x03be > +#define REG_SF_USR_EXPOSURE_CHG 0x03c0 > +#define REG_SF_USR_TOT_GAIN 0x03c2 > +#define REG_SF_USR_TOT_GAIN_CHG 0x03c4 > +#define REG_SF_RGAIN 0x03c6 > +#define REG_SF_RGAIN_CHG 0x03c8 > +#define REG_SF_GGAIN 0x03ca > +#define REG_SF_GGAIN_CHG 0x03cc > +#define REG_SF_BGAIN 0x03ce > +#define REG_SF_BGAIN_CHG 0x03d0 > +#define REG_SF_WBGAIN_CHG 0x03d2 > +#define REG_SF_FLICKER_QUANT 0x03d4 > +#define REG_SF_FLICKER_QUANT_CHG 0x03d6 > + > +/* Output interface (parallel/MIPI) setup */ > +#define REG_OIF_EN_MIPI_LANES 0x03f2 > +#define REG_OIF_EN_PACKETS 0x03f4 > +#define EN_PACKETS_CSI2 0xc3 > +#define REG_OIF_CFG_CHG 0x03f6 > + > +/* Auto-algorithms enable mask */ > +#define REG_DBG_AUTOALG_EN 0x03f8 > +#define AALG_ALL_EN BIT(0) > +#define AALG_AE_EN BIT(1) > +#define AALG_DIVLEI_EN BIT(2) > +#define AALG_WB_EN BIT(3) > +#define AALG_USE_WB_FOR_ISP BIT(4) > +#define AALG_FLICKER_EN BIT(5) > +#define AALG_FIT_EN BIT(6) > +#define AALG_WRHW_EN BIT(7) > + > +/* Pointers to color correction matrices */ > +#define REG_PTR_CCM_HORIZON 0x06d0 > +#define REG_PTR_CCM_INCANDESCENT 0x06d4 > +#define REG_PTR_CCM_WARM_WHITE 0x06d8 > +#define REG_PTR_CCM_COOL_WHITE 0x06dc > +#define REG_PTR_CCM_DL50 0x06e0 > +#define REG_PTR_CCM_DL65 0x06e4 > +#define REG_PTR_CCM_OUTDOOR 0x06ec > + > +#define REG_ARR_CCM(n) (0x2800 + 36 * (n)) > + > +static const char * const s5k5baf_supply_names[] = { > + "vdda", /* Analog power supply 2.8V (2.6V to 3.0V) */ > + "vddreg", /* Regulator input power supply 1.8V (1.7V to 1.9V) > + or 2.8V (2.6V to 3.0) */ > + "vddio", /* I/O power supply 1.8V (1.65V to 1.95V) > + or 2.8V (2.5V to 3.1V) */ > +}; > +#define S5K5BAF_NUM_SUPPLIES ARRAY_SIZE(s5k5baf_supply_names) > + > +struct s5k5baf_gpio { > + int gpio; > + int level; > +}; > + > +enum s5k5baf_gpio_id { > + STBY, > + RST, > + NUM_GPIOS, > +}; > + > +#define PAD_CIS 0 > +#define PAD_OUT 1 > +#define NUM_CIS_PADS 1 > +#define NUM_ISP_PADS 2 > + > +struct s5k5baf_pixfmt { > + enum v4l2_mbus_pixelcode code; > + u32 colorspace; > + /* REG_P_FMT(x) register value */ > + u16 reg_p_fmt; > +}; > + > +struct s5k5baf_ctrls { > + struct v4l2_ctrl_handler handler; > + struct { /* Auto / manual white balance cluster */ > + struct v4l2_ctrl *awb; > + struct v4l2_ctrl *gain_red; > + struct v4l2_ctrl *gain_blue; > + }; > + struct { /* Mirror cluster */ > + struct v4l2_ctrl *hflip; > + struct v4l2_ctrl *vflip; > + }; > + struct { /* Auto exposure / manual exposure and gain cluster */ > + struct v4l2_ctrl *auto_exp; > + struct v4l2_ctrl *exposure; > + struct v4l2_ctrl *gain; > + }; > +}; > + > +enum { > + S5K5BAF_FW_ID_PATCH, > + S5K5BAF_FW_ID_CCM, > + S5K5BAF_FW_ID_CIS, > +}; > + > +struct s5k5baf_fw { > + u16 count; > + struct { > + u16 id; > + u16 offset; > + } seq[0]; > + u16 data[0]; > +}; > + > +struct s5k5baf { > + struct s5k5baf_gpio gpios[NUM_GPIOS]; > + enum v4l2_mbus_type bus_type; > + u8 nlanes; > + struct regulator_bulk_data supplies[S5K5BAF_NUM_SUPPLIES]; > + > + struct clk *clock; > + u32 mclk_frequency; > + > + struct s5k5baf_fw *fw; > + > + struct v4l2_subdev cis_sd; > + struct media_pad cis_pad; > + > + struct v4l2_subdev sd; > + struct media_pad pads[NUM_ISP_PADS]; > + > + /* protects the struct members below */ > + struct mutex lock; > + > + int error; > + > + struct v4l2_rect crop_sink; > + struct v4l2_rect compose; > + struct v4l2_rect crop_source; > + /* index to s5k5baf_formats array */ > + int pixfmt; > + /* actual frame interval in 100us */ > + u16 fiv; > + /* requested frame interval in 100us */ > + u16 req_fiv; > + /* cache for REG_DBG_AUTOALG_EN register */ > + u16 auto_alg; > + > + struct s5k5baf_ctrls ctrls; > + > + unsigned int streaming:1; > + unsigned int apply_cfg:1; > + unsigned int apply_crop:1; > + unsigned int valid_auto_alg:1; > + unsigned int power; > +}; > + > +static const struct s5k5baf_pixfmt s5k5baf_formats[] = { > + { V4L2_MBUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_JPEG, 5 }, > + /* range 16-240 */ > + { V4L2_MBUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_REC709, 6 }, > + { V4L2_MBUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_JPEG, 0 }, > +}; > + > +static struct v4l2_rect s5k5baf_cis_rect = { > + 0, 0, S5K5BAF_CIS_WIDTH, S5K5BAF_CIS_HEIGHT > +}; > + > +/* Setfile contains set of I2C command sequences. Each sequence has its ID. > + * setfile format: > + * u8 magic[4]; > + * u16 count; number of sequences > + * struct { > + * u16 id; sequence id > + * u16 offset; sequence offset in data array > + * } seq[count]; > + * u16 data[*]; array containing sequences > + * > + */ > +static int s5k5baf_fw_parse(struct device *dev, struct s5k5baf_fw **fw, > + size_t count, const u16 *data) > +{ > + struct s5k5baf_fw *f; > + u16 *d, i, *end; > + int ret; > + > + if (count < S5K5BAG_FW_TAG_LEN + 1) { > + dev_err(dev, "firmware file too short (%d)\n", count); > + return -EINVAL; > + } > + > + ret = memcmp(data, S5K5BAF_FW_TAG, S5K5BAG_FW_TAG_LEN * sizeof(u16)); > + if (ret != 0) { > + dev_err(dev, "invalid firmware magic number\n"); > + return -EINVAL; > + } > + > + data += S5K5BAG_FW_TAG_LEN; > + count -= S5K5BAG_FW_TAG_LEN; > + > + d = devm_kzalloc(dev, count * sizeof(u16), GFP_KERNEL); > + > + for (i = 0; i < count; ++i) > + d[i] = le16_to_cpu(data[i]); > + > + f = (struct s5k5baf_fw *)d; > + if (count < 1 + 2 * f->count) { > + dev_err(dev, "invalid firmware header (count=%d size=%d)\n", > + f->count, 2 * (count + S5K5BAG_FW_TAG_LEN)); > + return -EINVAL; > + } > + end = d + count; > + d += 1 + 2 * f->count; > + > + for (i = 0; i < f->count; ++i) { > + if (f->seq[i].offset + d <= end) > + continue; > + dev_err(dev, "invalid firmware header (seq=%d)\n", i); > + return -EINVAL; > + } > + > + *fw = f; > + > + return 0; > +} > + > +static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl) > +{ > + return &container_of(ctrl->handler, struct s5k5baf, ctrls.handler)->sd; > +} > + > +static inline bool s5k5baf_is_cis_subdev(struct v4l2_subdev *sd) > +{ > + return sd->entity.type == MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; > +} > + > +static inline struct s5k5baf *to_s5k5baf(struct v4l2_subdev *sd) > +{ > + if (s5k5baf_is_cis_subdev(sd)) > + return container_of(sd, struct s5k5baf, cis_sd); > + else > + return container_of(sd, struct s5k5baf, sd); > +} > + > +static u16 s5k5baf_i2c_read(struct s5k5baf *state, u16 addr) > +{ > + struct i2c_client *c = v4l2_get_subdevdata(&state->sd); > + __be16 w, r; > + struct i2c_msg msg[] = { > + { .addr = c->addr, .flags = 0, > + .len = 2, .buf = (u8 *)&w }, > + { .addr = c->addr, .flags = I2C_M_RD, > + .len = 2, .buf = (u8 *)&r }, > + }; > + int ret; > + > + if (state->error) > + return 0; > + > + w = cpu_to_be16(addr); > + ret = i2c_transfer(c->adapter, msg, 2); > + r = be16_to_cpu(r); > + > + v4l2_dbg(3, debug, c, "i2c_read: 0x%04x : 0x%04x\n", addr, r); > + > + if (ret != 2) { > + v4l2_err(c, "i2c_read: error during transfer (%d)\n", ret); > + state->error = ret; > + } > + return r; > +} > + > +static void s5k5baf_i2c_write(struct s5k5baf *state, u16 addr, u16 val) > +{ > + u8 buf[4] = { addr >> 8, addr & 0xFF, val >> 8, val & 0xFF }; > + struct i2c_client *c = v4l2_get_subdevdata(&state->sd); > + int ret; > + > + if (state->error) > + return; > + > + ret = i2c_master_send(c, buf, 4); > + v4l2_dbg(3, debug, c, "i2c_write: 0x%04x : 0x%04x\n", addr, val); > + > + if (ret != 4) { > + v4l2_err(c, "i2c_write: error during transfer (%d)\n", ret); > + state->error = ret; > + } > +} > + > +static u16 s5k5baf_read(struct s5k5baf *state, u16 addr) > +{ > + s5k5baf_i2c_write(state, REG_CMDRD_ADDR, addr); > + return s5k5baf_i2c_read(state, REG_CMD_BUF); > +} > + > +static void s5k5baf_write(struct s5k5baf *state, u16 addr, u16 val) > +{ > + s5k5baf_i2c_write(state, REG_CMDWR_ADDR, addr); > + s5k5baf_i2c_write(state, REG_CMD_BUF, val); > +} > + > +static void s5k5baf_write_arr_seq(struct s5k5baf *state, u16 addr, > + u16 count, const u16 *seq) > +{ > + struct i2c_client *c = v4l2_get_subdevdata(&state->sd); > + __be16 buf[count + 1]; > + int ret, n; > + > + s5k5baf_i2c_write(state, REG_CMDWR_ADDR, addr); > + if (state->error) > + return; > + > + buf[0] = __constant_cpu_to_be16(REG_CMD_BUF); > + for (n = 1; n <= count; ++n) > + buf[n] = cpu_to_be16(*seq++); > + > + n *= 2; > + ret = i2c_master_send(c, (char *)buf, n); > + v4l2_dbg(3, debug, c, "i2c_write_seq(count=%d): %*ph\n", count, > + min(2 * count, 64), seq - count); > + > + if (ret != n) { > + v4l2_err(c, "i2c_write_seq: error during transfer (%d)\n", ret); > + state->error = ret; > + } > +} > + > +#define s5k5baf_write_seq(state, addr, seq...) \ > + s5k5baf_write_arr_seq(state, addr, sizeof((char[]){ seq }), \ > + (const u16 []){ seq }); > + > +/* add items count at the beginning of the list */ > +#define NSEQ(seq...) sizeof((char[]){ seq }), seq > + > +/* > + * s5k5baf_write_nseq() - Writes sequences of values to sensor memory via i2c > + * @nseq: sequence of u16 words in format: > + * (N, address, value[1]...value[N-1])*,0 > + * Ex.: > + * u16 seq[] = { NSEQ(0x4000, 1, 1), NSEQ(0x4010, 640, 480), 0 }; > + * ret = s5k5baf_write_nseq(c, seq); > + */ > +static void s5k5baf_write_nseq(struct s5k5baf *state, const u16 *nseq) > +{ > + int count; > + > + while ((count = *nseq++)) { > + u16 addr = *nseq++; > + --count; > + > + s5k5baf_write_arr_seq(state, addr, count, nseq); > + nseq += count; > + } > +} > + > +static void s5k5baf_synchronize(struct s5k5baf *state, int timeout, u16 addr) > +{ > + unsigned long end = jiffies + msecs_to_jiffies(timeout); > + u16 reg; > + > + s5k5baf_write(state, addr, 1); > + do { > + reg = s5k5baf_read(state, addr); > + if (state->error || !reg) > + return; > + usleep_range(5000, 10000); > + } while (time_is_after_jiffies(end)); > + > + v4l2_err(&state->sd, "timeout on register synchronize (%#x)\n", addr); > + state->error = -ETIMEDOUT; > +} > + > +static u16 *s5k5baf_fw_get_seq(struct s5k5baf *state, u16 seq_id) > +{ > + struct s5k5baf_fw *fw = state->fw; > + u16 *data = fw->data + 2 * fw->count; > + int i; > + > + if (fw == NULL) > + return NULL; > + > + for (i = 0; i < fw->count; ++i) { > + if (fw->seq[i].id == seq_id) > + return data + fw->seq[i].offset; > + } > + > + return NULL; > +} > + > +static void s5k5baf_hw_patch(struct s5k5baf *state) > +{ > + u16 *seq = s5k5baf_fw_get_seq(state, S5K5BAF_FW_ID_PATCH); > + > + if (seq) > + s5k5baf_write_nseq(state, seq); > +} > + > +static void s5k5baf_hw_set_clocks(struct s5k5baf *state) > +{ > + unsigned long mclk = state->mclk_frequency / 1000; > + u16 status; > + static const u16 nseq_clk_cfg[] = { > + NSEQ(REG_I_USE_NPVI_CLOCKS, > + NPVI_CLOCKS, NMIPI_CLOCKS, 0, > + SCLK_PVI_FREQ / 4, PCLK_MIN_FREQ / 4, PCLK_MAX_FREQ / 4, > + SCLK_MIPI_FREQ / 4, PCLK_MIN_FREQ / 4, PCLK_MAX_FREQ / 4), > + NSEQ(REG_I_USE_REGS_API, 1), > + 0 > + }; > + > + s5k5baf_write_seq(state, REG_I_INCLK_FREQ_L, mclk & 0xffff, mclk >> 16); > + s5k5baf_write_nseq(state, nseq_clk_cfg); > + > + s5k5baf_synchronize(state, 250, REG_I_INIT_PARAMS_UPDATED); > + status = s5k5baf_read(state, REG_I_ERROR_INFO); > + if (!state->error && status) { > + v4l2_err(&state->sd, "error configuring PLL (%d)\n", status); > + state->error = -EINVAL; > + } > +} > + > +/* set custom color correction matrices for various illuminations */ > +static void s5k5baf_hw_set_ccm(struct s5k5baf *state) > +{ > + u16 *seq = s5k5baf_fw_get_seq(state, S5K5BAF_FW_ID_CCM); > + > + if (seq) > + s5k5baf_write_nseq(state, seq); > +} > + > +/* CIS sensor tuning, based on undocumented android driver code */ > +static void s5k5baf_hw_set_cis(struct s5k5baf *state) > +{ > + u16 *seq = s5k5baf_fw_get_seq(state, S5K5BAF_FW_ID_CIS); > + > + if (!seq) > + return; > + > + s5k5baf_i2c_write(state, REG_CMDWR_PAGE, PAGE_IF_HW); > + s5k5baf_write_nseq(state, seq); > + s5k5baf_i2c_write(state, REG_CMDWR_PAGE, PAGE_IF_SW); > +} > + > +static void s5k5baf_hw_sync_cfg(struct s5k5baf *state) > +{ > + s5k5baf_write(state, REG_G_PREV_CFG_CHG, 1); > + if (state->apply_crop) { > + s5k5baf_write(state, REG_G_INPUTS_CHANGE_REQ, 1); > + s5k5baf_write(state, REG_G_PREV_CFG_BYPASS_CHANGED, 1); > + } > + s5k5baf_synchronize(state, 500, REG_G_NEW_CFG_SYNC); > +} > +/* Set horizontal and vertical image flipping */ > +static void s5k5baf_hw_set_mirror(struct s5k5baf *state) > +{ > + u16 flip = state->ctrls.vflip->val | (state->ctrls.vflip->val << 1); > + > + s5k5baf_write(state, REG_P_PREV_MIRROR(0), flip); > + if (state->streaming) > + s5k5baf_hw_sync_cfg(state); > +} > + > +static void s5k5baf_hw_set_alg(struct s5k5baf *state, u16 alg, bool enable) > +{ > + u16 cur_alg, new_alg; > + > + if (!state->valid_auto_alg) > + cur_alg = s5k5baf_read(state, REG_DBG_AUTOALG_EN); > + else > + cur_alg = state->auto_alg; > + > + new_alg = enable ? (cur_alg | alg) : (cur_alg & ~alg); > + > + if (new_alg != cur_alg) > + s5k5baf_write(state, REG_DBG_AUTOALG_EN, new_alg); > + > + if (state->error) > + return; > + > + state->valid_auto_alg = 1; > + state->auto_alg = new_alg; > +} > + > +/* Configure auto/manual white balance and R/G/B gains */ > +static void s5k5baf_hw_set_awb(struct s5k5baf *state, int awb) > +{ > + struct s5k5baf_ctrls *ctrls = &state->ctrls; > + > + if (!awb) > + s5k5baf_write_seq(state, REG_SF_RGAIN, > + ctrls->gain_red->val, 1, > + S5K5BAF_GAIN_GREEN_DEF, 1, > + ctrls->gain_blue->val, 1, > + 1); > + > + s5k5baf_hw_set_alg(state, AALG_WB_EN, awb); > +} > + > +/* Program FW with exposure time, 'exposure' in us units */ > +static void s5k5baf_hw_set_user_exposure(struct s5k5baf *state, int exposure) > +{ > + unsigned int time = exposure / 10; > + > + s5k5baf_write_seq(state, REG_SF_USR_EXPOSURE_L, > + time & 0xffff, time >> 16, 1); > +} > + > +static void s5k5baf_hw_set_user_gain(struct s5k5baf *state, int gain) > +{ > + s5k5baf_write_seq(state, REG_SF_USR_TOT_GAIN, gain, 1); > +} > + > +/* Set auto/manual exposure and total gain */ > +static void s5k5baf_hw_set_auto_exposure(struct s5k5baf *state, int value) > +{ > + if (value == V4L2_EXPOSURE_AUTO) { > + s5k5baf_hw_set_alg(state, AALG_AE_EN | AALG_DIVLEI_EN, true); > + } else { > + unsigned int exp_time = state->ctrls.exposure->val; > + > + s5k5baf_hw_set_user_exposure(state, exp_time); > + s5k5baf_hw_set_user_gain(state, state->ctrls.gain->val); > + s5k5baf_hw_set_alg(state, AALG_AE_EN | AALG_DIVLEI_EN, false); > + } > +} > + > +static void s5k5baf_hw_set_anti_flicker(struct s5k5baf *state, int v) > +{ > + if (v == V4L2_CID_POWER_LINE_FREQUENCY_AUTO) { > + s5k5baf_hw_set_alg(state, AALG_FLICKER_EN, true); > + } else { > + /* The V4L2_CID_LINE_FREQUENCY control values match > + * the register values */ > + s5k5baf_write_seq(state, REG_SF_FLICKER_QUANT, v, 1); > + s5k5baf_hw_set_alg(state, AALG_FLICKER_EN, false); > + } > +} > + > +static void s5k5baf_hw_set_colorfx(struct s5k5baf *state, int val) > +{ > + static const u16 colorfx[] = { > + [V4L2_COLORFX_NONE] = 0, > + [V4L2_COLORFX_BW] = 1, > + [V4L2_COLORFX_NEGATIVE] = 2, > + [V4L2_COLORFX_SEPIA] = 3, > + [V4L2_COLORFX_SKY_BLUE] = 4, > + [V4L2_COLORFX_SKETCH] = 5, > + }; > + > + s5k5baf_write(state, REG_G_SPEC_EFFECTS, colorfx[val]); > +} > + > +static int s5k5baf_find_pixfmt(struct v4l2_mbus_framefmt *mf) > +{ > + int i, c = -1; > + > + for (i = 0; i < ARRAY_SIZE(s5k5baf_formats); i++) { > + if (mf->colorspace != s5k5baf_formats[i].colorspace) > + continue; > + if (mf->code == s5k5baf_formats[i].code) > + return i; > + if (c < 0) > + c = i; > + } > + return (c < 0) ? 0 : c; > +} > + > +static int s5k5baf_clear_error(struct s5k5baf *state) > +{ > + int ret = state->error; > + > + state->error = 0; > + return ret; > +} > + > +static int s5k5baf_hw_set_video_bus(struct s5k5baf *state) > +{ > + u16 en_pkts; > + > + if (state->bus_type == V4L2_MBUS_CSI2) > + en_pkts = EN_PACKETS_CSI2; > + else > + en_pkts = 0; > + > + s5k5baf_write_seq(state, REG_OIF_EN_MIPI_LANES, > + state->nlanes, en_pkts, 1); > + > + return s5k5baf_clear_error(state); > +} > + > +static u16 s5k5baf_get_cfg_error(struct s5k5baf *state) > +{ > + u16 err = s5k5baf_read(state, REG_G_PREV_CFG_ERROR); > + if (err) > + s5k5baf_write(state, REG_G_PREV_CFG_ERROR, 0); > + return err; > +} > + > +static void s5k5baf_hw_set_fiv(struct s5k5baf *state, u16 fiv) > +{ > + s5k5baf_write(state, REG_P_MAX_FR_TIME(0), fiv); > + s5k5baf_hw_sync_cfg(state); > +} > + > +static void s5k5baf_hw_find_min_fiv(struct s5k5baf *state) > +{ > + u16 err, fiv; > + int n; > + > + fiv = s5k5baf_read(state, REG_G_ACTUAL_P_FR_TIME); > + if (state->error) > + return; > + > + for (n = 5; n > 0; --n) { > + s5k5baf_hw_set_fiv(state, fiv); > + err = s5k5baf_get_cfg_error(state); > + if (state->error) > + return; > + switch (err) { > + case CFG_ERROR_RANGE: > + ++fiv; > + break; > + case 0: > + state->fiv = fiv; > + v4l2_info(&state->sd, > + "found valid frame interval: %d00us\n", fiv); > + return; > + default: > + v4l2_err(&state->sd, > + "error setting frame interval: %d\n", err); > + state->error = -EINVAL; > + } > + }; > + v4l2_err(&state->sd, "cannot find correct frame interval\n"); > + state->error = -ERANGE; > +} > + > +static void s5k5baf_hw_validate_cfg(struct s5k5baf *state) > +{ > + u16 err; > + > + err = s5k5baf_get_cfg_error(state); > + if (state->error) > + return; > + > + switch (err) { > + case 0: > + state->apply_cfg = 1; > + return; > + case CFG_ERROR_RANGE: > + s5k5baf_hw_find_min_fiv(state); > + if (!state->error) > + state->apply_cfg = 1; > + return; > + default: > + v4l2_err(&state->sd, > + "error setting format: %d\n", err); > + state->error = -EINVAL; > + } > +} > + > +static void s5k5baf_rescale(struct v4l2_rect *r, const struct v4l2_rect *v, > + const struct v4l2_rect *n, > + const struct v4l2_rect *d) > +{ > + r->left = v->left * n->width / d->width; > + r->top = v->top * n->height / d->height; > + r->width = v->width * n->width / d->width; > + r->height = v->height * n->height / d->height; > +} > + > +static int s5k5baf_hw_set_crop_rects(struct s5k5baf *state) > +{ > + struct v4l2_rect *p, r; > + u16 err; > + int ret; > + > + p = &state->crop_sink; > + s5k5baf_write_seq(state, REG_G_PREVREQ_IN_WIDTH, p->width, p->height, > + p->left, p->top); > + > + s5k5baf_rescale(&r, &state->crop_source, &state->crop_sink, > + &state->compose); > + s5k5baf_write_seq(state, REG_G_PREVZOOM_IN_WIDTH, r.width, r.height, > + r.left, r.top); > + > + s5k5baf_synchronize(state, 500, REG_G_INPUTS_CHANGE_REQ); > + s5k5baf_synchronize(state, 500, REG_G_PREV_CFG_BYPASS_CHANGED); > + err = s5k5baf_get_cfg_error(state); > + ret = s5k5baf_clear_error(state); > + if (ret < 0) > + return ret; > + > + switch (err) { > + case 0: > + break; > + case CFG_ERROR_RANGE: > + /* retry crop with frame interval set to max */ > + s5k5baf_hw_set_fiv(state, S5K5BAF_MAX_FR_TIME); > + err = s5k5baf_get_cfg_error(state); > + ret = s5k5baf_clear_error(state); > + if (ret < 0) > + return ret; > + if (err) { > + v4l2_err(&state->sd, > + "crop error on max frame interval: %d\n", err); > + state->error = -EINVAL; > + } > + s5k5baf_hw_set_fiv(state, state->req_fiv); > + s5k5baf_hw_validate_cfg(state); > + break; > + default: > + v4l2_err(&state->sd, "crop error: %d\n", err); > + return -EINVAL; > + } > + > + if (!state->apply_cfg) > + return 0; > + > + p = &state->crop_source; > + s5k5baf_write_seq(state, REG_P_OUT_WIDTH(0), p->width, p->height); > + s5k5baf_hw_set_fiv(state, state->req_fiv); > + s5k5baf_hw_validate_cfg(state); > + > + return s5k5baf_clear_error(state); > +} > + > +static void s5k5baf_hw_set_config(struct s5k5baf *state) > +{ > + u16 reg_fmt = s5k5baf_formats[state->pixfmt].reg_p_fmt; > + struct v4l2_rect *r = &state->crop_source; > + > + s5k5baf_write_seq(state, REG_P_OUT_WIDTH(0), > + r->width, r->height, reg_fmt, > + PCLK_MAX_FREQ >> 2, PCLK_MIN_FREQ >> 2, > + PVI_MASK_MIPI, CLK_MIPI_INDEX, > + FR_RATE_FIXED, FR_RATE_Q_DYNAMIC, > + state->req_fiv, S5K5BAF_MIN_FR_TIME); > + s5k5baf_hw_sync_cfg(state); > + s5k5baf_hw_validate_cfg(state); > +} > + > + > +static void s5k5baf_hw_set_test_pattern(struct s5k5baf *state, int id) > +{ > + s5k5baf_i2c_write(state, REG_PATTERN_WIDTH, 800); > + s5k5baf_i2c_write(state, REG_PATTERN_HEIGHT, 511); > + s5k5baf_i2c_write(state, REG_PATTERN_PARAM, 0); > + s5k5baf_i2c_write(state, REG_PATTERN_SET, id); > +} > + > +static void s5k5baf_gpio_assert(struct s5k5baf *state, int id) > +{ > + struct s5k5baf_gpio *gpio = &state->gpios[id]; > + > + gpio_set_value(gpio->gpio, gpio->level); > +} > + > +static void s5k5baf_gpio_deassert(struct s5k5baf *state, int id) > +{ > + struct s5k5baf_gpio *gpio = &state->gpios[id]; > + > + gpio_set_value(gpio->gpio, !gpio->level); > +} > + > +static int s5k5baf_power_on(struct s5k5baf *state) > +{ > + int ret; > + > + ret = regulator_bulk_enable(S5K5BAF_NUM_SUPPLIES, state->supplies); > + if (ret < 0) > + goto err; > + > + ret = clk_set_rate(state->clock, state->mclk_frequency); > + if (ret < 0) > + goto err_reg_dis; > + > + ret = clk_prepare_enable(state->clock); > + if (ret < 0) > + goto err_reg_dis; > + > + v4l2_dbg(1, debug, &state->sd, "clock frequency: %ld\n", > + clk_get_rate(state->clock)); > + > + s5k5baf_gpio_deassert(state, STBY); > + usleep_range(50, 100); > + s5k5baf_gpio_deassert(state, RST); > + return 0; > + > +err_reg_dis: > + regulator_bulk_disable(S5K5BAF_NUM_SUPPLIES, state->supplies); > +err: > + v4l2_err(&state->sd, "%s() failed (%d)\n", __func__, ret); > + return ret; > +} > + > +static int s5k5baf_power_off(struct s5k5baf *state) > +{ > + int ret; > + > + state->streaming = 0; > + state->apply_cfg = 0; > + state->apply_crop = 0; > + > + s5k5baf_gpio_assert(state, RST); > + s5k5baf_gpio_assert(state, STBY); > + > + if (!IS_ERR(state->clock)) > + clk_disable_unprepare(state->clock); > + > + ret = regulator_bulk_disable(S5K5BAF_NUM_SUPPLIES, > + state->supplies); > + if (ret < 0) > + v4l2_err(&state->sd, "failed to disable regulators\n"); > + > + return 0; > +} > + > +static void s5k5baf_hw_init(struct s5k5baf *state) > +{ > + s5k5baf_i2c_write(state, AHB_MSB_ADDR_PTR, PAGE_IF_HW); > + s5k5baf_i2c_write(state, REG_CLEAR_HOST_INT, 0); > + s5k5baf_i2c_write(state, REG_SW_LOAD_COMPLETE, 1); > + s5k5baf_i2c_write(state, REG_CMDRD_PAGE, PAGE_IF_SW); > + s5k5baf_i2c_write(state, REG_CMDWR_PAGE, PAGE_IF_SW); > +} > + > +/* > + * V4L2 subdev core and video operations > + */ > + > +static void s5k5baf_initialize_data(struct s5k5baf *state) > +{ > + state->pixfmt = 0; > + state->req_fiv = 10000 / 15; > + state->fiv = state->req_fiv; > + state->valid_auto_alg = 0; > +} > + > +static int s5k5baf_load_setfile(struct s5k5baf *state) > +{ > + struct i2c_client *c = v4l2_get_subdevdata(&state->sd); > + const struct firmware *fw; > + int ret; > + > + ret = request_firmware(&fw, S5K5BAF_FW_FILENAME, &c->dev); > + if (ret < 0) { > + dev_warn(&c->dev, "firmware file (%s) not loaded\n", > + S5K5BAF_FW_FILENAME); > + return ret; > + } > + > + ret = s5k5baf_fw_parse(&c->dev, &state->fw, fw->size / 2, > + (u16 *)fw->data); > + > + release_firmware(fw); > + > + return ret; > +} > + > +static int s5k5baf_set_power(struct v4l2_subdev *sd, int on) > +{ > + struct s5k5baf *state = to_s5k5baf(sd); > + int ret = 0; > + > + mutex_lock(&state->lock); > + > + if (!on != state->power) > + goto out; > + > + if (on) { > + if (state->fw == NULL) > + s5k5baf_load_setfile(state); > + > + s5k5baf_initialize_data(state); > + ret = s5k5baf_power_on(state); > + if (ret < 0) > + goto out; > + > + s5k5baf_hw_init(state); > + s5k5baf_hw_patch(state); > + s5k5baf_i2c_write(state, REG_SET_HOST_INT, 1); > + s5k5baf_hw_set_clocks(state); > + > + ret = s5k5baf_hw_set_video_bus(state); > + if (ret < 0) > + goto out; > + > + s5k5baf_hw_set_cis(state); > + s5k5baf_hw_set_ccm(state); > + > + ret = s5k5baf_clear_error(state); > + if (!ret) > + state->power++; > + } else { > + s5k5baf_power_off(state); > + state->power--; > + } > + > +out: > + mutex_unlock(&state->lock); > + > + if (!ret && on) > + ret = v4l2_ctrl_handler_setup(&state->ctrls.handler); > + > + return ret; > +} > + > +static void s5k5baf_hw_set_stream(struct s5k5baf *state, int enable) > +{ > + s5k5baf_write_seq(state, REG_G_ENABLE_PREV, enable, 1); > +} > + > +static int s5k5baf_s_stream(struct v4l2_subdev *sd, int on) > +{ > + struct s5k5baf *state = to_s5k5baf(sd); > + int ret; > + > + mutex_lock(&state->lock); > + > + if (state->streaming == !!on) { > + ret = 0; > + goto out; > + } > + > + if (on) { > + s5k5baf_hw_set_config(state); > + ret = s5k5baf_hw_set_crop_rects(state); > + if (ret < 0) > + goto out; > + s5k5baf_hw_set_stream(state, 1); > + s5k5baf_i2c_write(state, 0xb0cc, 0x000b); > + } else { > + s5k5baf_hw_set_stream(state, 0); > + } > + ret = s5k5baf_clear_error(state); > + if (!ret) > + state->streaming = !state->streaming; > + > +out: > + mutex_unlock(&state->lock); > + > + return ret; > +} > + > +static int s5k5baf_g_frame_interval(struct v4l2_subdev *sd, > + struct v4l2_subdev_frame_interval *fi) > +{ > + struct s5k5baf *state = to_s5k5baf(sd); > + > + mutex_lock(&state->lock); > + fi->interval.numerator = state->fiv; > + fi->interval.denominator = 10000; > + mutex_unlock(&state->lock); > + > + return 0; > +} > + > +static void s5k5baf_set_frame_interval(struct s5k5baf *state, > + struct v4l2_subdev_frame_interval *fi) > +{ > + struct v4l2_fract *i = &fi->interval; > + > + if (fi->interval.denominator == 0) > + state->req_fiv = S5K5BAF_MAX_FR_TIME; > + else > + state->req_fiv = clamp_t(u32, > + i->numerator * 10000 / i->denominator, > + S5K5BAF_MIN_FR_TIME, > + S5K5BAF_MAX_FR_TIME); > + > + state->fiv = state->req_fiv; > + if (state->apply_cfg) { > + s5k5baf_hw_set_fiv(state, state->req_fiv); > + s5k5baf_hw_validate_cfg(state); > + } > + *i = (struct v4l2_fract){ state->fiv, 10000 }; > + if (state->fiv == state->req_fiv) > + v4l2_info(&state->sd, "frame interval changed to %d00us\n", > + state->fiv); > +} > + > +static int s5k5baf_s_frame_interval(struct v4l2_subdev *sd, > + struct v4l2_subdev_frame_interval *fi) > +{ > + struct s5k5baf *state = to_s5k5baf(sd); > + > + mutex_lock(&state->lock); > + s5k5baf_set_frame_interval(state, fi); > + mutex_unlock(&state->lock); > + return 0; > +} > + > +/* > + * V4L2 subdev pad level and video operations > + */ > +static int s5k5baf_enum_frame_interval(struct v4l2_subdev *sd, > + struct v4l2_subdev_fh *fh, > + struct v4l2_subdev_frame_interval_enum *fie) > +{ > + if (fie->index > S5K5BAF_MAX_FR_TIME - S5K5BAF_MIN_FR_TIME || > + fie->pad != PAD_CIS) > + return -EINVAL; > + > + v4l_bound_align_image(&fie->width, S5K5BAF_WIN_WIDTH_MIN, > + S5K5BAF_CIS_WIDTH, 1, > + &fie->height, S5K5BAF_WIN_HEIGHT_MIN, > + S5K5BAF_CIS_HEIGHT, 1, 0); > + > + fie->interval.numerator = S5K5BAF_MIN_FR_TIME + fie->index; > + fie->interval.denominator = 10000; > + > + return 0; > +} > + > +static int s5k5baf_enum_mbus_code(struct v4l2_subdev *sd, > + struct v4l2_subdev_fh *fh, > + struct v4l2_subdev_mbus_code_enum *code) > +{ > + if (code->pad == PAD_CIS) { > + if (code->index > 0) > + return -EINVAL; > + code->code = V4L2_MBUS_FMT_FIXED; > + return 0; > + } > + > + if (code->index >= ARRAY_SIZE(s5k5baf_formats)) > + return -EINVAL; > + > + code->code = s5k5baf_formats[code->index].code; > + return 0; > +} > + > +static int s5k5baf_enum_frame_size(struct v4l2_subdev *sd, > + struct v4l2_subdev_fh *fh, > + struct v4l2_subdev_frame_size_enum *fse) > +{ > + int i; > + > + if (fse->index > 0) > + return -EINVAL; > + > + if (fse->pad == PAD_CIS) { > + fse->code = V4L2_MBUS_FMT_FIXED; > + fse->min_width = S5K5BAF_CIS_WIDTH; > + fse->max_width = S5K5BAF_CIS_WIDTH; > + fse->min_height = S5K5BAF_CIS_HEIGHT; > + fse->max_height = S5K5BAF_CIS_HEIGHT; > + return 0; > + } > + > + i = ARRAY_SIZE(s5k5baf_formats); > + while (--i) > + if (fse->code == s5k5baf_formats[i].code) > + break; > + fse->code = s5k5baf_formats[i].code; > + fse->min_width = S5K5BAF_WIN_WIDTH_MIN; > + fse->max_width = S5K5BAF_CIS_WIDTH; > + fse->max_height = S5K5BAF_WIN_HEIGHT_MIN; > + fse->min_height = S5K5BAF_CIS_HEIGHT; > + > + return 0; > +} > + > +static void s5k5baf_try_cis_format(struct v4l2_mbus_framefmt *mf) > +{ > + mf->width = S5K5BAF_CIS_WIDTH; > + mf->height = S5K5BAF_CIS_HEIGHT; > + mf->code = V4L2_MBUS_FMT_FIXED; > + mf->colorspace = V4L2_COLORSPACE_JPEG; > + mf->field = V4L2_FIELD_NONE; > +} > + > +static int s5k5baf_try_isp_format(struct v4l2_mbus_framefmt *mf) > +{ > + int pixfmt; > + > + v4l_bound_align_image(&mf->width, S5K5BAF_WIN_WIDTH_MIN, > + S5K5BAF_CIS_WIDTH, 1, > + &mf->height, S5K5BAF_WIN_HEIGHT_MIN, > + S5K5BAF_CIS_HEIGHT, 1, 0); > + > + pixfmt = s5k5baf_find_pixfmt(mf); > + > + mf->colorspace = s5k5baf_formats[pixfmt].colorspace; > + mf->code = s5k5baf_formats[pixfmt].code; > + mf->field = V4L2_FIELD_NONE; > + > + return pixfmt; > +} > + > +static int s5k5baf_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, > + struct v4l2_subdev_format *fmt) > +{ > + struct s5k5baf *state = to_s5k5baf(sd); > + const struct s5k5baf_pixfmt *pixfmt; > + struct v4l2_mbus_framefmt *mf; > + > + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > + mf = v4l2_subdev_get_try_format(fh, fmt->pad); > + fmt->format = *mf; > + return 0; > + } > + > + mf = &fmt->format; > + if (fmt->pad == PAD_CIS) { > + s5k5baf_try_cis_format(mf); > + return 0; > + } > + mf->field = V4L2_FIELD_NONE; > + mutex_lock(&state->lock); > + pixfmt = &s5k5baf_formats[state->pixfmt]; > + mf->width = state->crop_source.width; > + mf->height = state->crop_source.height; > + mf->code = pixfmt->code; > + mf->colorspace = pixfmt->colorspace; > + mutex_unlock(&state->lock); > + > + return 0; > +} > + > +static int s5k5baf_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, > + struct v4l2_subdev_format *fmt) > +{ > + struct v4l2_mbus_framefmt *mf = &fmt->format; > + struct s5k5baf *state = to_s5k5baf(sd); > + const struct s5k5baf_pixfmt *pixfmt; > + int ret = 0; > + > + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > + *v4l2_subdev_get_try_format(fh, fmt->pad) = *mf; > + return 0; > + } > + > + if (fmt->pad == PAD_CIS) { > + s5k5baf_try_cis_format(mf); > + return 0; > + } > + > + mutex_lock(&state->lock); > + > + if (state->streaming) { > + mutex_unlock(&state->lock); > + return -EBUSY; > + } > + > + state->pixfmt = s5k5baf_try_isp_format(mf); > + pixfmt = &s5k5baf_formats[state->pixfmt]; > + mf->code = pixfmt->code; > + mf->colorspace = pixfmt->colorspace; > + mf->width = state->crop_source.width; > + mf->height = state->crop_source.height; > + > + mutex_unlock(&state->lock); > + return ret; > +} > + > +enum selection_rect { R_CIS, R_CROP_SINK, R_COMPOSE, R_CROP_SOURCE, R_INVALID }; > + > +static enum selection_rect s5k5baf_get_sel_rect(u32 pad, u32 target) > +{ > + switch (target) { > + case V4L2_SEL_TGT_CROP_BOUNDS: > + return pad ? R_COMPOSE : R_CIS; > + case V4L2_SEL_TGT_CROP: > + return pad ? R_CROP_SOURCE : R_CROP_SINK; > + case V4L2_SEL_TGT_COMPOSE_BOUNDS: > + return pad ? R_INVALID : R_CROP_SINK; > + case V4L2_SEL_TGT_COMPOSE: > + return pad ? R_INVALID : R_COMPOSE; > + default: > + return R_INVALID; > + } > +} > + > +static int s5k5baf_is_bound_target(u32 target) > +{ > + return (target == V4L2_SEL_TGT_CROP_BOUNDS || > + target == V4L2_SEL_TGT_COMPOSE_BOUNDS); > +} > + > +static int s5k5baf_get_selection(struct v4l2_subdev *sd, > + struct v4l2_subdev_fh *fh, > + struct v4l2_subdev_selection *sel) > +{ > + static enum selection_rect rtype; > + struct s5k5baf *state = to_s5k5baf(sd); > + > + rtype = s5k5baf_get_sel_rect(sel->pad, sel->target); > + > + switch (rtype) { > + case R_INVALID: > + return -EINVAL; > + case R_CIS: > + sel->r = s5k5baf_cis_rect; > + return 0; > + default: > + break; > + } > + > + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { > + if (rtype == R_COMPOSE) > + sel->r = *v4l2_subdev_get_try_compose(fh, sel->pad); > + else > + sel->r = *v4l2_subdev_get_try_crop(fh, sel->pad); > + return 0; > + } > + > + mutex_lock(&state->lock); > + switch (rtype) { > + case R_CROP_SINK: > + sel->r = state->crop_sink; > + break; > + case R_COMPOSE: > + sel->r = state->compose; > + break; > + case R_CROP_SOURCE: > + sel->r = state->crop_source; > + break; > + default: > + break; > + } > + if (s5k5baf_is_bound_target(sel->target)) { > + sel->r.left = 0; > + sel->r.top = 0; > + } > + mutex_unlock(&state->lock); > + > + return 0; > +} > + > +/* bounds range [start, start+len) to [0, max) and aligns to 2 */ > +static void s5k5baf_bound_range(u32 *start, u32 *len, u32 max) > +{ > + if (*len > max) > + *len = max; > + if (*start + *len > max) > + *start = max - *len; > + *start &= ~1; > + *len &= ~1; > + if (*len < S5K5BAF_WIN_WIDTH_MIN) > + *len = S5K5BAF_WIN_WIDTH_MIN; > +} > + > +static void s5k5baf_bound_rect(struct v4l2_rect *r, u32 width, u32 height) > +{ > + s5k5baf_bound_range(&r->left, &r->width, width); > + s5k5baf_bound_range(&r->top, &r->height, height); > +} > + > +static void s5k5baf_set_rect_and_adjust(struct v4l2_rect **rects, > + enum selection_rect first, > + struct v4l2_rect *v) > +{ > + struct v4l2_rect *r, *br; > + enum selection_rect i = first; > + > + *rects[first] = *v; > + do { > + r = rects[i]; > + br = rects[i - 1]; > + s5k5baf_bound_rect(r, br->width, br->height); > + } while (++i != R_INVALID); > + *v = *rects[first]; > +} > + > +static bool s5k5baf_cmp_rect(const struct v4l2_rect *r1, > + const struct v4l2_rect *r2) > +{ > + return !memcmp(r1, r2, sizeof(*r1)); > +} > + > +static int s5k5baf_set_selection(struct v4l2_subdev *sd, > + struct v4l2_subdev_fh *fh, > + struct v4l2_subdev_selection *sel) > +{ > + static enum selection_rect rtype; > + struct s5k5baf *state = to_s5k5baf(sd); > + struct v4l2_rect **rects; > + int ret = 0; > + > + rtype = s5k5baf_get_sel_rect(sel->pad, sel->target); > + if (rtype == R_INVALID || s5k5baf_is_bound_target(sel->target)) > + return -EINVAL; > + > + /* allow only scaling on compose */ > + if (rtype == R_COMPOSE) { > + sel->r.left = 0; > + sel->r.top = 0; > + } > + > + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { > + rects = (struct v4l2_rect * []) { > + &s5k5baf_cis_rect, > + v4l2_subdev_get_try_crop(fh, PAD_CIS), > + v4l2_subdev_get_try_compose(fh, PAD_CIS), > + v4l2_subdev_get_try_crop(fh, PAD_OUT) > + }; > + s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); > + return 0; > + } > + > + rects = (struct v4l2_rect * []) { > + &s5k5baf_cis_rect, > + &state->crop_sink, > + &state->compose, > + &state->crop_source > + }; > + mutex_lock(&state->lock); > + if (state->streaming) { > + /* adjust sel->r to avoid output resolution change */ > + if (rtype < R_CROP_SOURCE) { > + if (sel->r.width < state->crop_source.width) > + sel->r.width = state->crop_source.width; > + if (sel->r.height < state->crop_source.height) > + sel->r.height = state->crop_source.height; > + } else { > + sel->r.width = state->crop_source.width; > + sel->r.height = state->crop_source.height; > + } > + } > + s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); > + if (!s5k5baf_cmp_rect(&state->crop_sink, &s5k5baf_cis_rect) || > + !s5k5baf_cmp_rect(&state->compose, &s5k5baf_cis_rect)) > + state->apply_crop = 1; > + if (state->streaming) > + ret = s5k5baf_hw_set_crop_rects(state); > + mutex_unlock(&state->lock); > + > + return ret; > +} > + > +static const struct v4l2_subdev_pad_ops s5k5baf_cis_pad_ops = { > + .enum_mbus_code = s5k5baf_enum_mbus_code, > + .enum_frame_size = s5k5baf_enum_frame_size, > + .get_fmt = s5k5baf_get_fmt, > + .set_fmt = s5k5baf_set_fmt, > +}; > + > +static const struct v4l2_subdev_pad_ops s5k5baf_pad_ops = { > + .enum_mbus_code = s5k5baf_enum_mbus_code, > + .enum_frame_size = s5k5baf_enum_frame_size, > + .enum_frame_interval = s5k5baf_enum_frame_interval, > + .get_fmt = s5k5baf_get_fmt, > + .set_fmt = s5k5baf_set_fmt, > + .get_selection = s5k5baf_get_selection, > + .set_selection = s5k5baf_set_selection, > +}; > + > +static const struct v4l2_subdev_video_ops s5k5baf_video_ops = { > + .g_frame_interval = s5k5baf_g_frame_interval, > + .s_frame_interval = s5k5baf_s_frame_interval, > + .s_stream = s5k5baf_s_stream, > +}; > + > +/* > + * V4L2 subdev controls > + */ > + > +static int s5k5baf_s_ctrl(struct v4l2_ctrl *ctrl) > +{ > + struct v4l2_subdev *sd = ctrl_to_sd(ctrl); > + struct s5k5baf *state = to_s5k5baf(sd); > + int ret; > + > + v4l2_dbg(1, debug, sd, "ctrl: %s, value: %d\n", ctrl->name, ctrl->val); > + > + mutex_lock(&state->lock); > + > + if (state->power == 0) > + goto unlock; > + > + switch (ctrl->id) { > + case V4L2_CID_AUTO_WHITE_BALANCE: > + s5k5baf_hw_set_awb(state, ctrl->val); > + break; > + > + case V4L2_CID_BRIGHTNESS: > + s5k5baf_write(state, REG_USER_BRIGHTNESS, ctrl->val); > + break; > + > + case V4L2_CID_COLORFX: > + s5k5baf_hw_set_colorfx(state, ctrl->val); > + break; > + > + case V4L2_CID_CONTRAST: > + s5k5baf_write(state, REG_USER_CONTRAST, ctrl->val); > + break; > + > + case V4L2_CID_EXPOSURE_AUTO: > + s5k5baf_hw_set_auto_exposure(state, ctrl->val); > + break; > + > + case V4L2_CID_HFLIP: > + s5k5baf_hw_set_mirror(state); > + break; > + > + case V4L2_CID_POWER_LINE_FREQUENCY: > + s5k5baf_hw_set_anti_flicker(state, ctrl->val); > + break; > + > + case V4L2_CID_SATURATION: > + s5k5baf_write(state, REG_USER_SATURATION, ctrl->val); > + break; > + > + case V4L2_CID_SHARPNESS: > + s5k5baf_write(state, REG_USER_SHARPBLUR, ctrl->val); > + break; > + > + case V4L2_CID_WHITE_BALANCE_TEMPERATURE: > + s5k5baf_write(state, REG_P_COLORTEMP(0), ctrl->val); > + if (state->apply_cfg) > + s5k5baf_hw_sync_cfg(state); > + break; > + > + case V4L2_CID_TEST_PATTERN: > + s5k5baf_hw_set_test_pattern(state, ctrl->val); > + break; > + } > +unlock: > + ret = s5k5baf_clear_error(state); > + mutex_unlock(&state->lock); > + return ret; > +} > + > +static const struct v4l2_ctrl_ops s5k5baf_ctrl_ops = { > + .s_ctrl = s5k5baf_s_ctrl, > +}; > + > +static const char * const s5k5baf_test_pattern_menu[] = { > + "Disabled", > + "Blank", > + "Bars", > + "Gradients", > + "Textile", > + "Textile2", > + "Squares" > +}; > + > +static int s5k5baf_initialize_ctrls(struct s5k5baf *state) > +{ > + const struct v4l2_ctrl_ops *ops = &s5k5baf_ctrl_ops; > + struct s5k5baf_ctrls *ctrls = &state->ctrls; > + struct v4l2_ctrl_handler *hdl = &ctrls->handler; > + int ret; > + > + ret = v4l2_ctrl_handler_init(hdl, 16); > + if (ret < 0) { > + v4l2_err(&state->sd, "cannot init ctrl handler (%d)\n", ret); > + return ret; > + } > + > + /* Auto white balance cluster */ > + ctrls->awb = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTO_WHITE_BALANCE, > + 0, 1, 1, 1); > + ctrls->gain_red = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_RED_BALANCE, > + 0, 255, 1, S5K5BAF_GAIN_RED_DEF); > + ctrls->gain_blue = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BLUE_BALANCE, > + 0, 255, 1, S5K5BAF_GAIN_BLUE_DEF); > + v4l2_ctrl_auto_cluster(3, &ctrls->awb, 0, false); > + > + ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, 0); > + ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, 0); > + v4l2_ctrl_cluster(2, &ctrls->hflip); > + > + ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops, > + V4L2_CID_EXPOSURE_AUTO, > + V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO); > + /* Exposure time: x 1 us */ > + ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE, > + 0, 6000000U, 1, 100000U); > + /* Total gain: 256 <=> 1x */ > + ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN, > + 0, 256, 1, 256); > + v4l2_ctrl_auto_cluster(3, &ctrls->auto_exp, 0, false); > + > + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_POWER_LINE_FREQUENCY, > + V4L2_CID_POWER_LINE_FREQUENCY_AUTO, 0, > + V4L2_CID_POWER_LINE_FREQUENCY_AUTO); > + > + v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_COLORFX, > + V4L2_COLORFX_SKY_BLUE, ~0x6f, V4L2_COLORFX_NONE); > + > + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_WHITE_BALANCE_TEMPERATURE, > + 0, 256, 1, 0); > + > + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0); > + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -127, 127, 1, 0); > + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0); > + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -127, 127, 1, 0); > + > + v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN, > + ARRAY_SIZE(s5k5baf_test_pattern_menu) - 1, > + 0, 0, s5k5baf_test_pattern_menu); > + > + if (hdl->error) { > + v4l2_err(&state->sd, "error creating controls (%d)\n", > + hdl->error); > + ret = hdl->error; > + v4l2_ctrl_handler_free(hdl); > + return ret; > + } > + > + state->sd.ctrl_handler = hdl; > + return 0; > +} > + > +/* > + * V4L2 subdev internal operations > + */ > +static int s5k5baf_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) > +{ > + struct v4l2_mbus_framefmt *mf; > + > + mf = v4l2_subdev_get_try_format(fh, PAD_CIS); > + s5k5baf_try_cis_format(mf); > + > + if (s5k5baf_is_cis_subdev(sd)) > + return 0; > + > + mf = v4l2_subdev_get_try_format(fh, PAD_OUT); > + mf->colorspace = s5k5baf_formats[0].colorspace; > + mf->code = s5k5baf_formats[0].code; > + mf->width = s5k5baf_cis_rect.width; > + mf->height = s5k5baf_cis_rect.height; > + mf->field = V4L2_FIELD_NONE; > + > + *v4l2_subdev_get_try_crop(fh, PAD_CIS) = s5k5baf_cis_rect; > + *v4l2_subdev_get_try_compose(fh, PAD_CIS) = s5k5baf_cis_rect; > + *v4l2_subdev_get_try_crop(fh, PAD_OUT) = s5k5baf_cis_rect; > + > + return 0; > +} > + > +static int s5k5baf_check_fw_revision(struct s5k5baf *state) > +{ > + u16 api_ver = 0, fw_rev = 0, s_id = 0; > + int ret; > + > + api_ver = s5k5baf_read(state, REG_FW_APIVER); > + fw_rev = s5k5baf_read(state, REG_FW_REVISION) & 0xff; > + s_id = s5k5baf_read(state, REG_FW_SENSOR_ID); > + ret = s5k5baf_clear_error(state); > + if (ret < 0) > + return ret; > + > + v4l2_info(&state->sd, "FW API=%#x, revision=%#x sensor_id=%#x\n", > + api_ver, fw_rev, s_id); > + > + if (api_ver != S5K5BAF_FW_APIVER) { > + v4l2_err(&state->sd, "FW API version not supported\n"); > + return -ENODEV; > + } > + > + return 0; > +} > + > +static int s5k5baf_registered(struct v4l2_subdev *sd) > +{ > + struct s5k5baf *state = to_s5k5baf(sd); > + int ret; > + > + ret = v4l2_device_register_subdev(sd->v4l2_dev, &state->cis_sd); > + if (ret < 0) > + v4l2_err(sd, "failed to register subdev %s\n", > + state->cis_sd.name); > + else > + ret = media_entity_create_link(&state->cis_sd.entity, PAD_CIS, > + &state->sd.entity, PAD_CIS, > + MEDIA_LNK_FL_IMMUTABLE | > + MEDIA_LNK_FL_ENABLED); > + return ret; > +} > + > +static void s5k5baf_unregistered(struct v4l2_subdev *sd) > +{ > + struct s5k5baf *state = to_s5k5baf(sd); > + v4l2_device_unregister_subdev(&state->cis_sd); > +} > + > +static const struct v4l2_subdev_ops s5k5baf_cis_subdev_ops = { > + .pad = &s5k5baf_cis_pad_ops, > +}; > + > +static const struct v4l2_subdev_internal_ops s5k5baf_cis_subdev_internal_ops = { > + .open = s5k5baf_open, > +}; > + > +static const struct v4l2_subdev_internal_ops s5k5baf_subdev_internal_ops = { > + .registered = s5k5baf_registered, > + .unregistered = s5k5baf_unregistered, > + .open = s5k5baf_open, > +}; > + > +static const struct v4l2_subdev_core_ops s5k5baf_core_ops = { > + .s_power = s5k5baf_set_power, > + .log_status = v4l2_ctrl_subdev_log_status, > +}; > + > +static const struct v4l2_subdev_ops s5k5baf_subdev_ops = { > + .core = &s5k5baf_core_ops, > + .pad = &s5k5baf_pad_ops, > + .video = &s5k5baf_video_ops, > +}; > + > +static int s5k5baf_configure_gpios(struct s5k5baf *state) > +{ > + static const char const *name[] = { "S5K5BAF_STBY", "S5K5BAF_RST" }; > + struct i2c_client *c = v4l2_get_subdevdata(&state->sd); > + struct s5k5baf_gpio *g = state->gpios; > + int ret, i; > + > + for (i = 0; i < NUM_GPIOS; ++i) { > + int flags = GPIOF_DIR_OUT; > + if (g[i].level) > + flags |= GPIOF_INIT_HIGH; > + ret = devm_gpio_request_one(&c->dev, g[i].gpio, flags, name[i]); > + if (ret < 0) { > + v4l2_err(c, "failed to request gpio %s\n", name[i]); > + return ret; > + } > + } > + return 0; > +} > + > +static int s5k5baf_parse_gpios(struct s5k5baf_gpio *gpios, struct device *dev) > +{ > + static const char * const names[] = { > + "stbyn-gpios", > + "rstn-gpios", > + }; > + struct device_node *node = dev->of_node; > + enum of_gpio_flags flags; > + int ret, i; > + > + for (i = 0; i < NUM_GPIOS; ++i) { > + ret = of_get_named_gpio_flags(node, names[i], 0, &flags); > + if (ret < 0) { > + dev_err(dev, "no %s GPIO pin provided\n", names[i]); > + return ret; > + } > + gpios[i].gpio = ret; > + gpios[i].level = !(flags & OF_GPIO_ACTIVE_LOW); > + } > + > + return 0; > +} > + > +static int s5k5baf_parse_device_node(struct s5k5baf *state, struct device *dev) > +{ > + struct device_node *node = dev->of_node; > + struct device_node *node_ep; > + struct v4l2_of_endpoint ep; > + int ret; > + > + if (!node) { > + dev_err(dev, "no device-tree node provided\n"); > + return -EINVAL; > + } > + > + ret = of_property_read_u32(node, "clock-frequency", > + &state->mclk_frequency); > + if (ret < 0) { > + state->mclk_frequency = S5K5BAF_DEFAULT_MCLK_FREQ; > + dev_info(dev, "using default %u Hz clock frequency\n", > + state->mclk_frequency); > + } > + > + ret = s5k5baf_parse_gpios(state->gpios, dev); > + if (ret < 0) > + return ret; > + > + node_ep = v4l2_of_get_next_endpoint(node, NULL); > + if (!node_ep) { > + dev_err(dev, "no endpoint defined at node %s\n", > + node->full_name); > + return -EINVAL; > + } > + > + v4l2_of_parse_endpoint(node_ep, &ep); > + of_node_put(node_ep); > + state->bus_type = ep.bus_type; > + > + switch (state->bus_type) { > + case V4L2_MBUS_CSI2: > + state->nlanes = ep.bus.mipi_csi2.num_data_lanes; > + break; > + case V4L2_MBUS_PARALLEL: > + break; > + default: > + dev_err(dev, "unsupported bus in endpoint defined at node %s\n", > + node->full_name); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int s5k5baf_configure_subdevs(struct s5k5baf *state, > + struct i2c_client *c) > +{ > + struct v4l2_subdev *sd; > + int ret; > + > + sd = &state->cis_sd; > + v4l2_subdev_init(sd, &s5k5baf_cis_subdev_ops); > + sd->owner = THIS_MODULE; > + v4l2_set_subdevdata(sd, state); > + snprintf(sd->name, sizeof(sd->name), "S5K5BAF-CIS %d-%04x", > + i2c_adapter_id(c->adapter), c->addr); > + > + sd->internal_ops = &s5k5baf_cis_subdev_internal_ops; > + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > + > + state->cis_pad.flags = MEDIA_PAD_FL_SOURCE; > + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; > + ret = media_entity_init(&sd->entity, NUM_CIS_PADS, &state->cis_pad, 0); > + if (ret < 0) > + goto err; > + > + sd = &state->sd; > + v4l2_i2c_subdev_init(sd, c, &s5k5baf_subdev_ops); > + snprintf(sd->name, sizeof(sd->name), "S5K5BAF-ISP %d-%04x", > + i2c_adapter_id(c->adapter), c->addr); > + > + sd->internal_ops = &s5k5baf_subdev_internal_ops; > + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > + > + state->pads[PAD_CIS].flags = MEDIA_PAD_FL_SINK; > + state->pads[PAD_OUT].flags = MEDIA_PAD_FL_SOURCE; > + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV; > + ret = media_entity_init(&sd->entity, NUM_ISP_PADS, state->pads, 0); > + > + if (!ret) > + return 0; > + > + media_entity_cleanup(&state->cis_sd.entity); > +err: > + dev_err(&c->dev, "cannot init media entity %s\n", sd->name); > + return ret; > +} > + > +static int s5k5baf_configure_regulators(struct s5k5baf *state) > +{ > + struct i2c_client *c = v4l2_get_subdevdata(&state->sd); > + int ret; > + int i; > + > + for (i = 0; i < S5K5BAF_NUM_SUPPLIES; i++) > + state->supplies[i].supply = s5k5baf_supply_names[i]; > + > + ret = devm_regulator_bulk_get(&c->dev, S5K5BAF_NUM_SUPPLIES, > + state->supplies); > + if (ret < 0) > + v4l2_err(c, "failed to get regulators\n"); > + return ret; > +} > + > +static int s5k5baf_probe(struct i2c_client *c, > + const struct i2c_device_id *id) > +{ > + struct s5k5baf *state; > + int ret; > + > + state = devm_kzalloc(&c->dev, sizeof(*state), GFP_KERNEL); > + if (!state) > + return -ENOMEM; > + > + mutex_init(&state->lock); > + state->crop_sink = s5k5baf_cis_rect; > + state->compose = s5k5baf_cis_rect; > + state->crop_source = s5k5baf_cis_rect; > + > + ret = s5k5baf_parse_device_node(state, &c->dev); > + if (ret < 0) > + return ret; > + > + ret = s5k5baf_configure_subdevs(state, c); > + if (ret < 0) > + return ret; > + > + ret = s5k5baf_configure_gpios(state); > + if (ret < 0) > + goto err_me; > + > + ret = s5k5baf_configure_regulators(state); > + if (ret < 0) > + goto err_me; > + > + state->clock = devm_clk_get(state->sd.dev, S5K5BAF_CLK_NAME); > + if (IS_ERR(state->clock)) { > + ret = -EPROBE_DEFER; > + goto err_me; > + } > + > + ret = s5k5baf_power_on(state); > + if (ret < 0) { > + ret = -EPROBE_DEFER; > + goto err_me; > + } > + s5k5baf_hw_init(state); > + ret = s5k5baf_check_fw_revision(state); > + > + s5k5baf_power_off(state); > + if (ret < 0) > + goto err_me; > + > + ret = s5k5baf_initialize_ctrls(state); > + if (ret < 0) > + goto err_me; > + > + ret = v4l2_async_register_subdev(&state->sd); > + if (ret < 0) > + goto err_ctrl; > + > + return 0; > + > +err_ctrl: > + v4l2_ctrl_handler_free(state->sd.ctrl_handler); > +err_me: > + media_entity_cleanup(&state->sd.entity); > + media_entity_cleanup(&state->cis_sd.entity); > + return ret; > +} > + > +static int s5k5baf_remove(struct i2c_client *c) > +{ > + struct v4l2_subdev *sd = i2c_get_clientdata(c); > + struct s5k5baf *state = to_s5k5baf(sd); > + > + v4l2_async_unregister_subdev(sd); > + v4l2_ctrl_handler_free(sd->ctrl_handler); > + media_entity_cleanup(&sd->entity); > + > + sd = &state->cis_sd; > + v4l2_device_unregister_subdev(sd); > + media_entity_cleanup(&sd->entity); > + > + return 0; > +} > + > +static const struct i2c_device_id s5k5baf_id[] = { > + { S5K5BAF_DRIVER_NAME, 0 }, > + { }, > +}; > +MODULE_DEVICE_TABLE(i2c, s5k5baf_id); > + > +static const struct of_device_id s5k5baf_of_match[] = { > + { .compatible = "samsung,s5k5baf" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, s5k5baf_of_match); > + > +static struct i2c_driver s5k5baf_i2c_driver = { > + .driver = { > + .of_match_table = s5k5baf_of_match, > + .name = S5K5BAF_DRIVER_NAME > + }, > + .probe = s5k5baf_probe, > + .remove = s5k5baf_remove, > + .id_table = s5k5baf_id, > +}; > + > +module_i2c_driver(s5k5baf_i2c_driver); > + > +MODULE_DESCRIPTION("Samsung S5K5BAF(X) UXGA camera driver"); > +MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>"); > +MODULE_LICENSE("GPL v2"); > -- Sylwester Nawrocki Samsung R&D Institute Poland ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v10 1/2] s5k5baf: add camera sensor driver 2013-12-19 13:54 ` Sylwester Nawrocki @ 2013-12-19 18:33 ` Laurent Pinchart 0 siblings, 0 replies; 5+ messages in thread From: Laurent Pinchart @ 2013-12-19 18:33 UTC (permalink / raw) To: Sylwester Nawrocki Cc: Andrzej Hajda, linux-media, linux-samsung-soc, devicetree, Kyungmin Park Hi Sylwester, On Thursday 19 December 2013 14:54:44 Sylwester Nawrocki wrote: > On 05/12/13 12:38, Andrzej Hajda wrote: > > Driver for Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor > > with embedded SoC ISP. > > The driver exposes the sensor as two V4L2 subdevices: > > - S5K5BAF-CIS - pure CMOS Image Sensor, fixed 1600x1200 format, > > no controls. > > - S5K5BAF-ISP - Image Signal Processor, formats up to 1600x1200, > > pre/post ISP cropping, downscaling via selection API, controls. > > > > Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> > > Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> > > Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> > > Hi Laurent, > > Does this driver look sane to you, at its 10'th version? :) > If so I could send a pull request including it this week. Yes, it does. Sorry for the delay. Please send the pull request. -- Regards, Laurent Pinchart ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v10 2/2] s5k5baf: add DT bindings for camera sensor 2013-12-05 11:38 [PATCH v10 0/2] S5K5BAF camera sensor driver Andrzej Hajda 2013-12-05 11:38 ` [PATCH v10 1/2] s5k5baf: add " Andrzej Hajda @ 2013-12-05 11:38 ` Andrzej Hajda 1 sibling, 0 replies; 5+ messages in thread From: Andrzej Hajda @ 2013-12-05 11:38 UTC (permalink / raw) To: linux-media Cc: Andrzej Hajda, laurent.pinchart, linux-samsung-soc, devicetree, Sylwester Nawrocki, Kyungmin Park, Rob Herring, Pawel Moll, Mark Rutland, Stephen Warren, Ian Campbell, Grant Likely The patch adds the DT bindings documentation for Samsung S5K5BAF Image Sensor. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Rutland <mark.rutland@arm.com> --- v10 - bindings moved to separate patch, - improved clocks description. --- .../devicetree/bindings/media/samsung-s5k5baf.txt | 58 ++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/samsung-s5k5baf.txt diff --git a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt new file mode 100644 index 0000000..1f51e04 --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt @@ -0,0 +1,58 @@ +Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP +-------------------------------------------------------------------- + +Required properties: + +- compatible : "samsung,s5k5baf"; +- reg : I2C slave address of the sensor; +- vdda-supply : analog power supply 2.8V (2.6V to 3.0V); +- vddreg-supply : regulator input power supply 1.8V (1.7V to 1.9V) + or 2.8V (2.6V to 3.0); +- vddio-supply : I/O power supply 1.8V (1.65V to 1.95V) + or 2.8V (2.5V to 3.1V); +- stbyn-gpios : GPIO connected to STDBYN pin; +- rstn-gpios : GPIO connected to RSTN pin; +- clocks : list of phandle and clock specifier pairs + according to common clock bindings for the + clocks described in clock-names; +- clock-names : should include "mclk" for the sensor's master clock; + +Optional properties: + +- clock-frequency : the frequency at which the "mclk" clock should be + configured to operate, in Hz; if this property is not + specified default 24 MHz value will be used. + +The device node should contain one 'port' child node with one child 'endpoint' +node, according to the bindings defined in Documentation/devicetree/bindings/ +media/video-interfaces.txt. The following are properties specific to those +nodes. + +endpoint node +------------- + +- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in + video-interfaces.txt. If present it should be <1> - the device + supports only one data lane without re-mapping. + +Example: + +s5k5bafx@2d { + compatible = "samsung,s5k5baf"; + reg = <0x2d>; + vdda-supply = <&cam_io_en_reg>; + vddreg-supply = <&vt_core_15v_reg>; + vddio-supply = <&vtcam_reg>; + stbyn-gpios = <&gpl2 0 1>; + rstn-gpios = <&gpl2 1 1>; + clock-names = "mclk"; + clocks = <&clock_cam 0>; + clock-frequency = <24000000>; + + port { + s5k5bafx_ep: endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; +}; -- 1.8.3.2 ^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-12-19 18:33 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-12-05 11:38 [PATCH v10 0/2] S5K5BAF camera sensor driver Andrzej Hajda 2013-12-05 11:38 ` [PATCH v10 1/2] s5k5baf: add " Andrzej Hajda 2013-12-19 13:54 ` Sylwester Nawrocki 2013-12-19 18:33 ` Laurent Pinchart 2013-12-05 11:38 ` [PATCH v10 2/2] s5k5baf: add DT bindings for camera sensor Andrzej Hajda
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).