[PATCH v7 0/4] ARM: SoC: add a new platform, UniPhier (arch/arm/mach-uniphier)

[PATCH v7 0/4] ARM: SoC: add a new platform, UniPhier (arch/arm/mach-uniphier)

[Masahiro Yamada]

This is an initial series for supporting Socionext UniPhier SoCs,
based on ARM Cortex-A9, mainly used for digital TVs, video recorders, etc.


Masahiro Yamada (4):
  ARM: UniPhier: add basic support for UniPhier architecture
  ARM: multi_v7_defconfig: enable UniPhier SoC family
  ARM: dts: UniPhier: add support for UniPhier SoCs and boards
  MAINTAINERS: add myself as ARM/UniPhier maintainer

 MAINTAINERS                                  |   7 ++
 arch/arm/Kconfig                             |   2 +
 arch/arm/Makefile                            |   1 +
 arch/arm/boot/dts/Makefile                   |   5 ++
 arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts   |  79 ++++++++++++++++++
 arch/arm/boot/dts/uniphier-ph1-ld4.dtsi      | 110 +++++++++++++++++++++++++
 arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts  |  79 ++++++++++++++++++
 arch/arm/boot/dts/uniphier-ph1-pro4.dtsi     | 117 +++++++++++++++++++++++++++
 arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts  |  80 ++++++++++++++++++
 arch/arm/boot/dts/uniphier-ph1-sld3.dtsi     | 117 +++++++++++++++++++++++++++
 arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts  |  79 ++++++++++++++++++
 arch/arm/boot/dts/uniphier-ph1-sld8.dtsi     | 110 +++++++++++++++++++++++++
 arch/arm/boot/dts/uniphier-support-card.dtsi |  65 +++++++++++++++
 arch/arm/configs/multi_v7_defconfig          |   1 +
 arch/arm/mach-uniphier/Kconfig               |  11 +++
 arch/arm/mach-uniphier/Makefile              |   2 +
 arch/arm/mach-uniphier/platsmp.c             |  90 +++++++++++++++++++++
 arch/arm/mach-uniphier/uniphier.c            |  30 +++++++
 18 files changed, 985 insertions(+)
 create mode 100644 arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
 create mode 100644 arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
 create mode 100644 arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
 create mode 100644 arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
 create mode 100644 arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
 create mode 100644 arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
 create mode 100644 arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
 create mode 100644 arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
 create mode 100644 arch/arm/boot/dts/uniphier-support-card.dtsi
 create mode 100644 arch/arm/mach-uniphier/Kconfig
 create mode 100644 arch/arm/mach-uniphier/Makefile
 create mode 100644 arch/arm/mach-uniphier/platsmp.c
 create mode 100644 arch/arm/mach-uniphier/uniphier.c

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v7 1/4] ARM: UniPhier: add basic support for UniPhier architecture

[Masahiro Yamada]

Initial commit for a new SoC family, UniPhier, developed by
Socionext Inc. (formerly, System LSI Business Division of
Panasonic Corporation).

This commit includes a minimal set of components for booting the
kernel, including SMP support.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

Changes in v7: None
Changes in v6: None
Changes in v5:
  - Move syscon_regmap_lookup_by_compatible() call to smp_prepare_cpus handler

Changes in v4:
  - Access to SMP register with base + offset(0x1208).

Changes in v3:
  - Replace <asm/io.h> with <linux/io.h>
  - Rename uniphier_board_dt_compat to uniphier_dt_compat
  - Move uniphier_secondary_startup into platsmp.c as __naked function
  - Add return before "err:" label (bug fix)
  - Use syscon driver rather than hard-coded register address

Changes in v2:
  - Fix SoC compatible string
    "socionext,ph1-proxstream2" -> "socionext,proxstream2"

 arch/arm/Kconfig                  |  2 +
 arch/arm/Makefile                 |  1 +
 arch/arm/mach-uniphier/Kconfig    | 11 +++++
 arch/arm/mach-uniphier/Makefile   |  2 +
 arch/arm/mach-uniphier/platsmp.c  | 90 +++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-uniphier/uniphier.c | 30 +++++++++++++
 6 files changed, 136 insertions(+)
 create mode 100644 arch/arm/mach-uniphier/Kconfig
 create mode 100644 arch/arm/mach-uniphier/Makefile
 create mode 100644 arch/arm/mach-uniphier/platsmp.c
 create mode 100644 arch/arm/mach-uniphier/uniphier.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 45df48b..b2e0d988 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -937,6 +937,8 @@ source "arch/arm/mach-tegra/Kconfig"
 
 source "arch/arm/mach-u300/Kconfig"
 
+source "arch/arm/mach-uniphier/Kconfig"
+
 source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 985227c..fe8f9ef 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -200,6 +200,7 @@ machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
 machine-$(CONFIG_ARCH_U300)		+= u300
 machine-$(CONFIG_ARCH_U8500)		+= ux500
+machine-$(CONFIG_ARCH_UNIPHIER)		+= uniphier
 machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
 machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
new file mode 100644
index 0000000..a017b1d
--- /dev/null
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -0,0 +1,11 @@
+config ARCH_UNIPHIER
+	bool "Socionext UniPhier SoCs"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GLOBAL_TIMER
+	select ARM_GIC
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD
+	help
+	  Support for UniPhier SoC family developed by Socionext Inc.
+	  (formerly, System LSI Business Division of Panasonic Corporation)
diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
new file mode 100644
index 0000000..60bd226
--- /dev/null
+++ b/arch/arm/mach-uniphier/Makefile
@@ -0,0 +1,2 @@
+obj-y			:= uniphier.o
+obj-$(CONFIG_SMP)	+= platsmp.o
diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c
new file mode 100644
index 0000000..5943e1c
--- /dev/null
+++ b/arch/arm/mach-uniphier/platsmp.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/sizes.h>
+#include <linux/compiler.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <asm/smp.h>
+#include <asm/smp_scu.h>
+
+static struct regmap *sbcm_regmap;
+
+static void __init uniphier_smp_prepare_cpus(unsigned int max_cpus)
+{
+	static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
+	unsigned long scu_base_phys = 0;
+	void __iomem *scu_base;
+
+	sbcm_regmap = syscon_regmap_lookup_by_compatible(
+			"socionext,uniphier-system-bus-controller-misc");
+	if (IS_ERR(sbcm_regmap)) {
+		pr_err("failed to regmap system-bus-controller-misc\n");
+		goto err;
+	}
+
+	if (scu_a9_has_base())
+		scu_base_phys = scu_a9_get_base();
+
+	if (!scu_base_phys) {
+		pr_err("failed to get scu base\n");
+		goto err;
+	}
+
+	scu_base = ioremap(scu_base_phys, SZ_128);
+	if (!scu_base) {
+		pr_err("failed to remap scu base (0x%08lx)\n", scu_base_phys);
+		goto err;
+	}
+
+	scu_enable(scu_base);
+	iounmap(scu_base);
+
+	return;
+err:
+	pr_warn("disabling SMP\n");
+	init_cpu_present(&only_cpu_0);
+	sbcm_regmap = NULL;
+}
+
+static void __naked uniphier_secondary_startup(void)
+{
+	asm("bl		v7_invalidate_l1\n"
+	    "b		secondary_startup\n");
+};
+
+static int uniphier_boot_secondary(unsigned int cpu,
+				   struct task_struct *idle)
+{
+	int ret;
+
+	if (!sbcm_regmap)
+		return -ENODEV;
+
+	ret = regmap_write(sbcm_regmap, 0x1208,
+			   virt_to_phys(uniphier_secondary_startup));
+	if (!ret)
+		asm("sev"); /* wake up secondary CPU */
+
+	return ret;
+}
+
+struct smp_operations uniphier_smp_ops __initdata = {
+	.smp_prepare_cpus	= uniphier_smp_prepare_cpus,
+	.smp_boot_secondary	= uniphier_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(uniphier_smp, "socionext,uniphier-smp",
+		      &uniphier_smp_ops);
diff --git a/arch/arm/mach-uniphier/uniphier.c b/arch/arm/mach-uniphier/uniphier.c
new file mode 100644
index 0000000..9be10ef
--- /dev/null
+++ b/arch/arm/mach-uniphier/uniphier.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/mach/arch.h>
+
+static const char * const uniphier_dt_compat[] __initconst = {
+	"socionext,ph1-sld3",
+	"socionext,ph1-ld4",
+	"socionext,ph1-pro4",
+	"socionext,ph1-sld8",
+	"socionext,ph1-pro5",
+	"socionext,proxstream2",
+	"socionext,ph1-ld6b",
+	NULL,
+};
+
+DT_MACHINE_START(UNIPHIER, "Socionext UniPhier")
+	.dt_compat	= uniphier_dt_compat,
+MACHINE_END
-- 
1.9.1

[PATCH v7 2/4] ARM: multi_v7_defconfig: enable UniPhier SoC family

[Masahiro Yamada]

Add UniPhier, a new citizen in the ARM multi platform.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index dca6983..a80ed4e 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -83,6 +83,7 @@ CONFIG_ARCH_TEGRA_3x_SOC=y
 CONFIG_ARCH_TEGRA_114_SOC=y
 CONFIG_ARCH_TEGRA_124_SOC=y
 CONFIG_TEGRA_EMC_SCALING_ENABLE=y
+CONFIG_ARCH_UNIPHIER=y
 CONFIG_ARCH_U8500=y
 CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
-- 
1.9.1

[PATCH v7 3/4] ARM: dts: UniPhier: add support for UniPhier SoCs and boards

[Masahiro Yamada]

Initial device trees for UniPhier SoCs: PH1-sLD3, PH1-LD4, PH1-Pro4,
and PH1-sLD8.

Signed-off-by: Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
---

Changes in v7:
  - Remove redundant "fifo-size" from the 16550A uart node

Changes in v6:
  - Remove redundant interrupt-parent property from timer nodes.

Changes in v5: None
Changes in v4:
  - Add system-bus-controller-misc node instead of uniphier-smp-reg node

Changes in v3:
  - License under GPL/X11
  - Drop "earlyprintk" kernel-parameter, add "stdout-path" property
  - Add syscon device for SMP boot support in order not to
    hard-code register address in platsmp.c

Changes in v2: None

 arch/arm/boot/dts/Makefile                   |   5 ++
 arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts   |  79 ++++++++++++++++++
 arch/arm/boot/dts/uniphier-ph1-ld4.dtsi      | 110 +++++++++++++++++++++++++
 arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts  |  79 ++++++++++++++++++
 arch/arm/boot/dts/uniphier-ph1-pro4.dtsi     | 117 +++++++++++++++++++++++++++
 arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts  |  80 ++++++++++++++++++
 arch/arm/boot/dts/uniphier-ph1-sld3.dtsi     | 117 +++++++++++++++++++++++++++
 arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts  |  79 ++++++++++++++++++
 arch/arm/boot/dts/uniphier-ph1-sld8.dtsi     | 110 +++++++++++++++++++++++++
 arch/arm/boot/dts/uniphier-support-card.dtsi |  65 +++++++++++++++
 10 files changed, 841 insertions(+)
 create mode 100644 arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
 create mode 100644 arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
 create mode 100644 arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
 create mode 100644 arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
 create mode 100644 arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
 create mode 100644 arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
 create mode 100644 arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
 create mode 100644 arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
 create mode 100644 arch/arm/boot/dts/uniphier-support-card.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 86217db..558b787 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -600,6 +600,11 @@ dtb-$(CONFIG_ARCH_U8500) += \
 	ste-hrefv60plus-tvk.dtb \
 	ste-ccu8540.dtb \
 	ste-ccu9540.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER) += \
+	uniphier-ph1-sld3-ref.dtb \
+	uniphier-ph1-ld4-ref.dtb \
+	uniphier-ph1-pro4-ref.dtb \
+	uniphier-ph1-sld8-ref.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += \
 	versatile-ab.dtb \
 	versatile-pb.dtb
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
new file mode 100644
index 0000000..200b0c9
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
@@ -0,0 +1,79 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD4 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-ld4.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PH1-LD4 Reference Board";
+	compatible = "socionext,ph1-ld4-ref", "socionext,ph1-ld4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serialsc;
+	};
+
+	aliases {
+		serial0 = &serialsc;
+	};
+};
+
+&extbus {
+	ranges = <0 0x00000000 0x0f000000 0x01000000
+		  1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+	interrupts = <0 49 4>;
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
new file mode 100644
index 0000000..6a34c56
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD4 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,ph1-ld4";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	clocks {
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		extbus: extbus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		system-bus-controller-misc@59800000 {
+			compatible = "socionext,uniphier-system-bus-controller-misc",
+				     "syscon";
+			reg = <0x59800000 0x2000>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
new file mode 100644
index 0000000..d891135
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
@@ -0,0 +1,79 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PH1-Pro4 Reference Board";
+	compatible = "socionext,ph1-pro4-ref", "socionext,ph1-pro4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serialsc;
+	};
+
+	aliases {
+		serial0 = &serialsc;
+	};
+};
+
+&extbus {
+	ranges = <0 0x00000000 0x0f000000 0x01000000
+		  1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+	interrupts = <0 50 4>;
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
new file mode 100644
index 0000000..dc63360
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
@@ -0,0 +1,117 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,ph1-pro4";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "socionext,uniphier-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		extbus: extbus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		system-bus-controller-misc@59800000 {
+			compatible = "socionext,uniphier-system-bus-controller-misc",
+				     "syscon";
+			reg = <0x59800000 0x2000>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
new file mode 100644
index 0000000..3ea64ae
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
@@ -0,0 +1,80 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-sld3.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PH1-sLD3 Reference Board";
+	compatible = "socionext,ph1-sld3-ref", "socionext,ph1-sld3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000
+		       0xc0000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serialsc;
+	};
+
+	aliases {
+		serial0 = &serialsc;
+	};
+};
+
+&extbus {
+	ranges = <0 0x00000000 0x0f000000 0x01000000
+		  1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+	interrupts = <0 49 4>;
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
new file mode 100644
index 0000000..248b188
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
@@ -0,0 +1,117 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,ph1-sld3";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "socionext,uniphier-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		extbus: extbus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		timer@20000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20000200 0x20>;
+			interrupts = <1 11 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@20000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20000600 0x20>;
+			interrupts = <1 13 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@20001000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x20001000 0x1000>,
+			      <0x20000100 0x100>;
+		};
+
+		system-bus-controller-misc@59800000 {
+			compatible = "socionext,uniphier-system-bus-controller-misc",
+				     "syscon";
+			reg = <0x59800000 0x2000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
new file mode 100644
index 0000000..dcdc4f7
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
@@ -0,0 +1,79 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD8 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-sld8.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PH1-sLD8 Reference Board";
+	compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serialsc;
+	};
+
+	aliases {
+		serial0 = &serialsc;
+	};
+};
+
+&extbus {
+	ranges = <0 0x00000000 0x0f000000 0x01000000
+		  1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+	interrupts = <0 48 4>;
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
new file mode 100644
index 0000000..baa71e1
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD8 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,ph1-sld8";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	clocks {
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		extbus: extbus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		system-bus-controller-misc@59800000 {
+			compatible = "socionext,uniphier-system-bus-controller-misc",
+				     "syscon";
+			reg = <0x59800000 0x2000>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi
new file mode 100644
index 0000000..da271e3
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-support-card.dtsi
@@ -0,0 +1,65 @@
+/*
+ * Device Tree Source for UniPhier Support Card (Expansion Board)
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&extbus {
+	support_card: support_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ethsc: ethernet@00000000 {
+			compatible = "smsc,lan9118", "smsc,lan9115";
+			reg = <0x00000000 0x1000>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+		};
+
+		serialsc: uart@000b0000 {
+			compatible = "ns16550a";
+			reg = <0x000b0000 0x20>;
+			clock-frequency = <12288000>;
+			reg-shift = <1>;
+		};
+	};
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v7 4/4] MAINTAINERS: add myself as ARM/UniPhier maintainer

[Masahiro Yamada]

Signed-off-by: Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
---

Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 1939513..3c31a27 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1525,6 +1525,13 @@ F:	drivers/rtc/rtc-ab3100.c
 F:	drivers/rtc/rtc-coh901331.c
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
 
+ARM/UNIPHIER ARCHITECTURE
+M:	Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
+L:	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-uniphier/
+N:	uniphier
+
 ARM/Ux500 ARM ARCHITECTURE
 M:	Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
 L:	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org (moderated for non-subscribers)
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v7 0/4] ARM: SoC: add a new platform, UniPhier (arch/arm/mach-uniphier)

[Arnd Bergmann]

On Friday 08 May 2015 13:07:10 Masahiro Yamada wrote:
> This is an initial series for supporting Socionext UniPhier SoCs,
> based on ARM Cortex-A9, mainly used for digital TVs, video recorders, etc.
> 
> 
> Masahiro Yamada (4):
>   ARM: UniPhier: add basic support for UniPhier architecture
>   ARM: multi_v7_defconfig: enable UniPhier SoC family
>   ARM: dts: UniPhier: add support for UniPhier SoCs and boards
>   MAINTAINERS: add myself as ARM/UniPhier maintainer

Applied all four patches, to the next/soc, next/defconfig, next/dt and
next/soc branches respectively.

Welcome as our latest new maintainer. In the future, please send
any follow-up patches for the architecture specific code to
arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org in addition to the normal recipients, once you
consider them ready to be applied.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v7 0/4] ARM: SoC: add a new platform, UniPhier (arch/arm/mach-uniphier)

[Masahiro Yamada]

Hi Arnd,


2015-05-13 0:00 GMT+09:00 Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>:
> On Friday 08 May 2015 13:07:10 Masahiro Yamada wrote:
>> This is an initial series for supporting Socionext UniPhier SoCs,
>> based on ARM Cortex-A9, mainly used for digital TVs, video recorders, etc.
>>
>>
>> Masahiro Yamada (4):
>>   ARM: UniPhier: add basic support for UniPhier architecture
>>   ARM: multi_v7_defconfig: enable UniPhier SoC family
>>   ARM: dts: UniPhier: add support for UniPhier SoCs and boards
>>   MAINTAINERS: add myself as ARM/UniPhier maintainer
>
> Applied all four patches, to the next/soc, next/defconfig, next/dt and
> next/soc branches respectively.

Thanks!
I can see them.


> Welcome as our latest new maintainer. In the future, please send
> any follow-up patches for the architecture specific code to
> arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org in addition to the normal recipients, once you
> consider them ready to be applied.


Please teach me a little more because I am not experienced enough
in this community.


I checked MAINTAINERS, but I could not find arm-DgEjT+Ai2yi4UlQgPVntAg@public.gmane.org
Is it documented somewhere?

I found ARM SUB-ARCHITECTURES entry in that file, but it does not mention
the responsible individuals.
(I assume, you and Olof are the ones.)


ARM SUB-ARCHITECTURES
L:      linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org (moderated for non-subscribers)
S:      Maintained
F:      arch/arm/mach-*/
F:      arch/arm/plat-*/
T:      git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git



I have one more question.

Are you receiving pull requests from each sub-arch maintainer?
Or should every patch be submitted to arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org and
applied by you (or other ARM-SoC maintainers)?

I have not earned enough reputations in this ML, so I know
it is too early for me to handle pull-reqs.

I understand the general development process of Linux, but
the maintainership of the ARM-SoC subsystem looks more hierarchized, so
I just want to know its development process correctly.


-- 
Best Regards
Masahiro Yamada
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v7 0/4] ARM: SoC: add a new platform, UniPhier (arch/arm/mach-uniphier)

[Arnd Bergmann]

On Wednesday 13 May 2015 16:00:21 Masahiro Yamada wrote:
> 2015-05-13 0:00 GMT+09:00 Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>:
> > On Friday 08 May 2015 13:07:10 Masahiro Yamada wrote:
> > Welcome as our latest new maintainer. In the future, please send
> > any follow-up patches for the architecture specific code to
> > arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org in addition to the normal recipients, once you
> > consider them ready to be applied.
> 
> 
> Please teach me a little more because I am not experienced enough
> in this community.
> 
> 
> I checked MAINTAINERS, but I could not find arm-DgEjT+Ai2yi4UlQgPVntAg@public.gmane.org
> Is it documented somewhere?
> 
> I found ARM SUB-ARCHITECTURES entry in that file, but it does not mention
> the responsible individuals.
> (I assume, you and Olof are the ones.)
>

We normally only take patches from subarch maintainers that know who
we are and how it works, but we don't want to be Cc'd on every single
patch, so we don't have an entry in MAINTAINERS directly.
 
> I have one more question.
> 
> Are you receiving pull requests from each sub-arch maintainer?
> Or should every patch be submitted to arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org and
> applied by you (or other ARM-SoC maintainers)?
> 
> I have not earned enough reputations in this ML, so I know
> it is too early for me to handle pull-reqs.
> 
> I understand the general development process of Linux, but
> the maintainership of the ARM-SoC subsystem looks more hierarchized, so
> I just want to know its development process correctly.

No worries, if you are unsure you can always ask us on the mailing
list or on the #armlinux channel on irc.freenode.net.

If you have more than a few patches at once, we'd always appreciate
a pull request, for a couple of patches, emails to arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org plus
linux-arm-kernel are fine as well.

When you do pull requests, please split them up according to larger
topics, e.g. send dts changes separately from code changes, and
separate bug fixes, cleanups and new feature support.

Often when you add a new driver, that will require sending the driver
code to a subsystem maintainer, and the dts changes to us. If everything
goes well, your DT bindings are both forward and backward compatible,
so they can get merged independently. If you ever have interdependencies
between them, talk to us first so we can find a solution.

For sending pull requests, it would be good to have a gpg key that
is signed by other well-known kernel developers. If you have such
a key, you can also request a kernel.org account to host a git tree
there, or you can host a git tree somewhere on your company's domain.
A public hosting service like github is not as good for us, but we
can deal with it when you are still ramping up your infrastructure.
Let me know if you need help finding kernel developers to sign your key.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v7 0/4] ARM: SoC: add a new platform, UniPhier (arch/arm/mach-uniphier)

[Baruch Siach]

Hi Arnd,

On Wed, May 13, 2015 at 09:48:33AM +0200, Arnd Bergmann wrote:
> For sending pull requests, it would be good to have a gpg key that
> is signed by other well-known kernel developers. If you have such
> a key, you can also request a kernel.org account to host a git tree
> there, or you can host a git tree somewhere on your company's domain.
> A public hosting service like github is not as good for us, but we
> can deal with it when you are still ramping up your infrastructure.
> Let me know if you need help finding kernel developers to sign your key.

Is a pull request from a kernel.org repo trusted more than the key itself? In 
other words, if I sign my pull request with a trusted key, why would the git 
repo location make any difference?

baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org - tel: +972.2.679.5364, http://www.tkos.co.il -
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v7 0/4] ARM: SoC: add a new platform, UniPhier (arch/arm/mach-uniphier)

[Arnd Bergmann]

On Wednesday 13 May 2015 11:32:34 Baruch Siach wrote:
> Hi Arnd,
> 
> On Wed, May 13, 2015 at 09:48:33AM +0200, Arnd Bergmann wrote:
> > For sending pull requests, it would be good to have a gpg key that
> > is signed by other well-known kernel developers. If you have such
> > a key, you can also request a kernel.org account to host a git tree
> > there, or you can host a git tree somewhere on your company's domain.
> > A public hosting service like github is not as good for us, but we
> > can deal with it when you are still ramping up your infrastructure.
> > Let me know if you need help finding kernel developers to sign your key.
> 
> Is a pull request from a kernel.org repo trusted more than the key itself? In 
> other words, if I sign my pull request with a trusted key, why would the git 
> repo location make any difference?

The main advantage is higher confidence I have in your pull request if I
don't look at the signature, because I can assume that someone else already
did when you got your account.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v7 0/4] ARM: SoC: add a new platform, UniPhier (arch/arm/mach-uniphier)

[Masahiro Yamada]

Hi Arnd,

2015-05-13 16:48 GMT+09:00 Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>:
> On Wednesday 13 May 2015 16:00:21 Masahiro Yamada wrote:
>> 2015-05-13 0:00 GMT+09:00 Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>:
>> > On Friday 08 May 2015 13:07:10 Masahiro Yamada wrote:
>> > Welcome as our latest new maintainer. In the future, please send
>> > any follow-up patches for the architecture specific code to
>> > arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org in addition to the normal recipients, once you
>> > consider them ready to be applied.
>>
>>
>> Please teach me a little more because I am not experienced enough
>> in this community.
>>
>>
>> I checked MAINTAINERS, but I could not find arm-DgEjT+Ai2yi4UlQgPVntAg@public.gmane.org
>> Is it documented somewhere?
>>
>> I found ARM SUB-ARCHITECTURES entry in that file, but it does not mention
>> the responsible individuals.
>> (I assume, you and Olof are the ones.)
>>
>
> We normally only take patches from subarch maintainers that know who
> we are and how it works, but we don't want to be Cc'd on every single
> patch, so we don't have an entry in MAINTAINERS directly.

I see.



>> I have one more question.
>>
>> Are you receiving pull requests from each sub-arch maintainer?
>> Or should every patch be submitted to arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org and
>> applied by you (or other ARM-SoC maintainers)?
>>
>> I have not earned enough reputations in this ML, so I know
>> it is too early for me to handle pull-reqs.
>>
>> I understand the general development process of Linux, but
>> the maintainership of the ARM-SoC subsystem looks more hierarchized, so
>> I just want to know its development process correctly.
>
> No worries, if you are unsure you can always ask us on the mailing
> list or on the #armlinux channel on irc.freenode.net.
>
> If you have more than a few patches at once, we'd always appreciate
> a pull request, for a couple of patches, emails to arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org plus
> linux-arm-kernel are fine as well.
>
> When you do pull requests, please split them up according to larger
> topics, e.g. send dts changes separately from code changes, and
> separate bug fixes, cleanups and new feature support.
>
> Often when you add a new driver, that will require sending the driver
> code to a subsystem maintainer, and the dts changes to us. If everything
> goes well, your DT bindings are both forward and backward compatible,
> so they can get merged independently. If you ever have interdependencies
> between them, talk to us first so we can find a solution.
>
> For sending pull requests, it would be good to have a gpg key that
> is signed by other well-known kernel developers. If you have such
> a key, you can also request a kernel.org account to host a git tree
> there, or you can host a git tree somewhere on your company's domain.
> A public hosting service like github is not as good for us, but we
> can deal with it when you are still ramping up your infrastructure.
> Let me know if you need help finding kernel developers to sign your key.

For now, I am not handling many patches, so I will send them to the ML.

If I need to send pull-reqs someday, I will ask for help.

Many thanks!!

-- 
Best Regards
Masahiro Yamada
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v7 0/4] ARM: SoC: add a new platform, UniPhier (arch/arm/mach-uniphier)

[Masahiro Yamada]

Hi Arnd,


2015-05-13 16:48 GMT+09:00 Arnd Bergmann <arnd@arndb.de>:
> On Wednesday 13 May 2015 16:00:21 Masahiro Yamada wrote:
>> 2015-05-13 0:00 GMT+09:00 Arnd Bergmann <arnd@arndb.de>:
>> > On Friday 08 May 2015 13:07:10 Masahiro Yamada wrote:
>> > Welcome as our latest new maintainer. In the future, please send
>> > any follow-up patches for the architecture specific code to
>> > arm@kernel.org in addition to the normal recipients, once you
>> > consider them ready to be applied.
>>
>>
>> Please teach me a little more because I am not experienced enough
>> in this community.
>>
>>
>> I checked MAINTAINERS, but I could not find arm@kernel.org.
>> Is it documented somewhere?
>>
>> I found ARM SUB-ARCHITECTURES entry in that file, but it does not mention
>> the responsible individuals.
>> (I assume, you and Olof are the ones.)
>>
>
> We normally only take patches from subarch maintainers that know who
> we are and how it works, but we don't want to be Cc'd on every single
> patch, so we don't have an entry in MAINTAINERS directly.
>
>> I have one more question.
>>
>> Are you receiving pull requests from each sub-arch maintainer?
>> Or should every patch be submitted to arm@kernel.org and
>> applied by you (or other ARM-SoC maintainers)?
>>
>> I have not earned enough reputations in this ML, so I know
>> it is too early for me to handle pull-reqs.
>>
>> I understand the general development process of Linux, but
>> the maintainership of the ARM-SoC subsystem looks more hierarchized, so
>> I just want to know its development process correctly.
>
> No worries, if you are unsure you can always ask us on the mailing
> list or on the #armlinux channel on irc.freenode.net.
>
> If you have more than a few patches at once, we'd always appreciate
> a pull request, for a couple of patches, emails to arm@kernel.org plus
> linux-arm-kernel are fine as well.
>
> When you do pull requests, please split them up according to larger
> topics, e.g. send dts changes separately from code changes, and
> separate bug fixes, cleanups and new feature support.
>
> Often when you add a new driver, that will require sending the driver
> code to a subsystem maintainer, and the dts changes to us. If everything
> goes well, your DT bindings are both forward and backward compatible,
> so they can get merged independently. If you ever have interdependencies
> between them, talk to us first so we can find a solution.
>
> For sending pull requests, it would be good to have a gpg key that
> is signed by other well-known kernel developers. If you have such
> a key, you can also request a kernel.org account to host a git tree
> there, or you can host a git tree somewhere on your company's domain.
> A public hosting service like github is not as good for us, but we
> can deal with it when you are still ramping up your infrastructure.
> Let me know if you need help finding kernel developers to sign your key.
>
>         Arnd


About 7 months have passed since I became a sub-arch maintainer (ARM/UniPhier),
and I am hoping now I deserve to have the gpg key thing you mentioned.

Could you help me get a key and a kernel.org account to host a git tree?

It would make it easier to get SoC-specific things in
without loading you and Olof.



-- 
Best Regards
Masahiro Yamada

Re: [PATCH v7 0/4] ARM: SoC: add a new platform, UniPhier (arch/arm/mach-uniphier)

[Arnd Bergmann]

On Monday 18 January 2016 19:54:08 Masahiro Yamada wrote:
> 2015-05-13 16:48 GMT+09:00 Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>:
> > On Wednesday 13 May 2015 16:00:21 Masahiro Yamada wrote:
> >
> > No worries, if you are unsure you can always ask us on the mailing
> > list or on the #armlinux channel on irc.freenode.net.
> >
> > If you have more than a few patches at once, we'd always appreciate
> > a pull request, for a couple of patches, emails to arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org plus
> > linux-arm-kernel are fine as well.
> >
> > When you do pull requests, please split them up according to larger
> > topics, e.g. send dts changes separately from code changes, and
> > separate bug fixes, cleanups and new feature support.
> >
> > Often when you add a new driver, that will require sending the driver
> > code to a subsystem maintainer, and the dts changes to us. If everything
> > goes well, your DT bindings are both forward and backward compatible,
> > so they can get merged independently. If you ever have interdependencies
> > between them, talk to us first so we can find a solution.
> >
> > For sending pull requests, it would be good to have a gpg key that
> > is signed by other well-known kernel developers. If you have such
> > a key, you can also request a kernel.org account to host a git tree
> > there, or you can host a git tree somewhere on your company's domain.
> > A public hosting service like github is not as good for us, but we
> > can deal with it when you are still ramping up your infrastructure.
> > Let me know if you need help finding kernel developers to sign your key.
> 
> 
> About 7 months have passed since I became a sub-arch maintainer (ARM/UniPhier),
> and I am hoping now I deserve to have the gpg key thing you mentioned.
> 
> Could you help me get a key and a kernel.org account to host a git tree?
> 
> It would make it easier to get SoC-specific things in
> without loading you and Olof.

Getting the kernel.org account should be straightforward once you have
a signed gpg key, see the description in https://www.kernel.org/category/faq.html

If you don't have a gpg key yet, please generate one with 4096 bits
keylength now. It's good to get as many signatures as possible from people
that already have signatures by other kernel contributors. The complication
is that you anyone who signs your key needs to verify your identity, otherwise
the signature method would not be helpful.

I have added three people to Cc that might be able you here: I understand that
you live in Osaka, so Simon Horman would be physically the closest in Kobe.
Takahiro Akashi works at Socionext in Tokyo, and I think you already know Akira
Tsukamoto.

If you happen to be in the same place with one of them, or maybe they have
already signed the key of someone close by.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html