Re: [PATCH v2 02/10] dt-bindings: add documentation for rk1108 cru

[Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>]

Hi Andy,

Am Montag, 14. November 2016, 20:03:01 CET schrieb Andy Yan:
> From: Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> 
> This adds the dt-binding documentation for the clock and reset unit
> found on Rockchip rk1108 SoCs.
> 
> Signed-off-by: Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> Signed-off-by: Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> ---
> 
> Changes in v2: None
> 
>  .../bindings/clock/rockchip,rk1108-cru.txt         | 60
> ++++++++++++++++++++++ 1 file changed, 60 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
> b/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt new file
> mode 100644
> index 0000000..4d2356b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
> @@ -0,0 +1,60 @@
> +* Rockchip RK1108 Clock and Reset Unit
> +
> +The RK1108 clock controller generates and supplies clock to various
> +controllers within the SoC and also implements a reset controller for SoC
> +peripherals.
> +
> +Required Properties:
> +
> +- compatible: should be "rockchip,rk1108-cru"
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +- #clock-cells: should be 1.
> +- #reset-cells: should be 1.
> +
> +Optional Properties:
> +
> +- rockchip,grf: phandle to the syscon managing the "general register files"
> +  If missing pll rates are not changeable, due to the missing pll lock
> status. +
> +Each clock is assigned an identifier and client nodes can use this
> identifier +to specify the clock which they consume. All available clocks
> are defined as +preprocessor macros in the dt-bindings/clock/rk1108-cru.h
> headers and can be +used in device tree sources. Similar macros exist for
> the reset sources in +these files.
> +
> +External clocks:
> +
> +There are several clocks that are generated outside the SoC. It is expected
> +that they are defined using standard clock bindings with following
> +clock-output-names:
> + - "xin24m" - crystal input - required,
> + - "cif_clkout" - output clock for the cif - optional
> + - "mipi_csi_clkout" - output clock for the mipi csi - optional
> + - "pclkin_vip" - external VIP clock - optional
> + - "ext_i2s" - external I2S clock - optional
> + - "ext_gmac" - external GMAC clock - optional
> + - "mac_ref_clkout" - output clock of the pll in the mac phy

we really only want to list the actual input clocks here, not outputs.

Also, the list of actual input clocks seems incomplete (hdmiphy, usbphy) and 
some clocks listed here do not match the clock controller 2 patches later 
(pclkin_vip, ext_gmac [rk1108 only has 10/100], ext_i2s, ...)


Heiko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html