From: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
To: Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>
Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCHv2 27/27] OMAPDSS: connector-analog-tv: Add DT support
Date: Tue, 26 Aug 2014 18:58:45 +0200 [thread overview]
Message-ID: <21704808.AJTjtXoZly@avalon> (raw)
In-Reply-To: <1387205794-32246-28-git-send-email-tomi.valkeinen-l0cyMroinI0@public.gmane.org>
Hi Tomi,
On Monday 16 December 2013 16:56:34 Tomi Valkeinen wrote:
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>
> ---
> .../video/omap2/displays-new/connector-analog-tv.c | 66 ++++++++++++++++++-
> 1 file changed, 65 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/video/omap2/displays-new/connector-analog-tv.c
> b/drivers/video/omap2/displays-new/connector-analog-tv.c index
> ccd9073f706f..ebed25a86487 100644
> --- a/drivers/video/omap2/displays-new/connector-analog-tv.c
> +++ b/drivers/video/omap2/displays-new/connector-analog-tv.c
> @@ -12,6 +12,7 @@
> #include <linux/slab.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> +#include <linux/of.h>
>
> #include <video/omapdss.h>
> #include <video/omap-panel-data.h>
> @@ -42,6 +43,12 @@ static const struct omap_video_timings tvc_pal_timings =
> { .interlace = true,
> };
>
> +static const struct of_device_id tvc_of_match[];
> +
> +struct tvc_of_data {
> + enum omap_dss_venc_type connector_type;
> +};
> +
> #define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
>
> static int tvc_connect(struct omap_dss_device *dssdev)
> @@ -92,7 +99,10 @@ static int tvc_enable(struct omap_dss_device *dssdev)
> in->ops.atv->set_timings(in, &ddata->timings);
>
> in->ops.atv->set_type(in, ddata->connector_type);
> - in->ops.atv->invert_vid_out_polarity(in, ddata->invert_polarity);
> +
> + if (!ddata->dev->of_node)
> + in->ops.atv->invert_vid_out_polarity(in,
> + ddata->invert_polarity);
>
> r = in->ops.atv->enable(in);
> if (r)
> @@ -205,6 +215,35 @@ static int tvc_probe_pdata(struct platform_device
> *pdev) return 0;
> }
>
> +static int tvc_probe_of(struct platform_device *pdev)
> +{
> + struct panel_drv_data *ddata = platform_get_drvdata(pdev);
> + struct device_node *node = pdev->dev.of_node;
> + struct omap_dss_device *in;
> + const struct of_device_id *match;
> + const struct tvc_of_data *data;
> +
> + match = of_match_node(tvc_of_match, pdev->dev.of_node);
> + if (!match) {
> + dev_err(&pdev->dev, "unsupported device\n");
> + return -ENODEV;
> + }
> +
> + data = match->data;
> +
> + in = omapdss_of_find_source_for_first_ep(node);
> + if (IS_ERR(in)) {
> + dev_err(&pdev->dev, "failed to find video source\n");
> + return PTR_ERR(in);
> + }
> +
> + ddata->in = in;
> +
> + ddata->connector_type = data->connector_type;
> +
> + return 0;
> +}
> +
> static int tvc_probe(struct platform_device *pdev)
> {
> struct panel_drv_data *ddata;
> @@ -222,6 +261,10 @@ static int tvc_probe(struct platform_device *pdev)
> r = tvc_probe_pdata(pdev);
> if (r)
> return r;
> + } else if (pdev->dev.of_node) {
> + r = tvc_probe_of(pdev);
> + if (r)
> + return r;
> } else {
> return -ENODEV;
> }
> @@ -263,12 +306,33 @@ static int __exit tvc_remove(struct platform_device
> *pdev) return 0;
> }
>
> +static const struct tvc_of_data tv_svideo_data = {
> + .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
> +};
> +
> +static const struct tvc_of_data tv_composite_video_data = {
> + .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
> +};
> +
> +static const struct of_device_id tvc_of_match[] = {
> + {
> + .compatible = "svideo-connector",
> + .data = &tv_svideo_data,
> + },
> + {
> + .compatible = "composite-video-connector",
I've just noticed that this doesn't match the bindings that document the
compatible value to be "composite-connector".
> + .data = &tv_composite_video_data,
> + },
> + {},
> +};
> +
> static struct platform_driver tvc_connector_driver = {
> .probe = tvc_probe,
> .remove = __exit_p(tvc_remove),
> .driver = {
> .name = "connector-analog-tv",
> .owner = THIS_MODULE,
> + .of_match_table = tvc_of_match,
> },
> };
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-08-26 16:58 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-16 14:56 [PATCHv2 00/27] OMAPDSS: DT support v2 Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 01/27] ARM: OMAP: remove DSS DT hack Tomi Valkeinen
2013-12-16 18:41 ` Tony Lindgren
2013-12-17 6:45 ` Tomi Valkeinen
2013-12-17 15:30 ` Tony Lindgren
2013-12-18 7:12 ` Tomi Valkeinen
2013-12-18 10:21 ` Tomi Valkeinen
2013-12-18 17:33 ` Tony Lindgren
2013-12-18 17:32 ` Tony Lindgren
2013-12-16 14:56 ` [PATCHv2 02/27] OMAPDSS: remove DT hacks for regulators Tomi Valkeinen
2013-12-16 18:42 ` Tony Lindgren
2013-12-17 6:42 ` Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 03/27] ARM: OMAP2+: add omapdss_init_of() Tomi Valkeinen
2013-12-16 18:46 ` Tony Lindgren
2013-12-17 6:20 ` Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 04/27] OMAPDSS: add 'label' support for DT Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 05/27] OMAPDSS: get dssdev->alias from DT alias Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 06/27] OMAPFB: clean up default display search Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 08/27] OMAPDSS: add of helpers Tomi Valkeinen
2013-12-17 7:00 ` Archit Taneja
2013-12-17 7:01 ` Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 09/27] OMAPDSS: Add DT support to DSS, DISPC, DPI and SDI Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 10/27] OMAPDSS: Add DT support to HDMI Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 11/27] OMAPDSS: Add DT support to VENC Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 12/27] OMAPDSS: Add DT support to DSI Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 13/27] ARM: omap3.dtsi: add omapdss information Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 14/27] ARM: omap4.dtsi: " Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 15/27] ARM: omap4-panda.dts: add display information Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 16/27] ARM: omap4-sdp.dts: " Tomi Valkeinen
[not found] ` <1387205794-32246-1-git-send-email-tomi.valkeinen-l0cyMroinI0@public.gmane.org>
2013-12-16 14:56 ` [PATCHv2 07/27] OMAPFB: search for default display with DT alias Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 17/27] ARM: omap3-tobi.dts: add lcd (TEST) Tomi Valkeinen
2013-12-17 17:17 ` Florian Vaussard
2013-12-16 14:56 ` [PATCHv2 18/27] ARM: omap3-beagle.dts: add display information Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 19/27] ARM: omap3-beagle-xm.dts: " Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 20/27] ARM: omap3-igep0020.dts: " Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 21/27] OMAPDSS: panel-dsi-cm: Add DT support Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 22/27] OMAPDSS: encoder-tfp410: " Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 23/27] OMAPDSS: connector-dvi: " Tomi Valkeinen
2013-12-17 7:05 ` Sascha Hauer
2013-12-17 7:15 ` Tomi Valkeinen
2013-12-17 15:15 ` Laurent Pinchart
2013-12-18 10:41 ` Tomi Valkeinen
[not found] ` <52B17BBF.8090003-l0cyMroinI0@public.gmane.org>
2013-12-18 14:02 ` Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 24/27] OMAPDSS: encoder-tpd12s015: " Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 25/27] OMAPDSS: hdmi-connector: " Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 26/27] OMAPDSS: panel-dpi: " Tomi Valkeinen
2013-12-16 14:56 ` [PATCHv2 27/27] OMAPDSS: connector-analog-tv: " Tomi Valkeinen
[not found] ` <1387205794-32246-28-git-send-email-tomi.valkeinen-l0cyMroinI0@public.gmane.org>
2014-08-26 16:58 ` Laurent Pinchart [this message]
2014-08-27 9:37 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=21704808.AJTjtXoZly@avalon \
--to=laurent.pinchart-rylnwiuwjnjg/c1bvhzhaw@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tomi.valkeinen-l0cyMroinI0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox