devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Heiko Stübner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org,
	dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
	eddie.cai-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 6/6] ARM: dts: add rk3288 evaluation board
Date: Wed, 16 Jul 2014 01:02:58 +0200	[thread overview]
Message-ID: <2186895.xqgxh7zegl@diego> (raw)
In-Reply-To: <1471578.ILeMmG2DL6@diego>

There exist 2 variants using either the act8846 or rk808 as pmic, while the
rest of the board stays the same.

Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
---
 arch/arm/boot/dts/rk3288-evb-act8846.dts | 136 +++++++++++++++++++++++++++++++
 arch/arm/boot/dts/rk3288-evb-rk808.dts   |  19 +++++
 arch/arm/boot/dts/rk3288-evb.dtsi        |  77 +++++++++++++++++
 3 files changed, 232 insertions(+)
 create mode 100644 arch/arm/boot/dts/rk3288-evb-act8846.dts
 create mode 100644 arch/arm/boot/dts/rk3288-evb-rk808.dts
 create mode 100644 arch/arm/boot/dts/rk3288-evb.dtsi

diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
new file mode 100644
index 0000000..9b1ef03
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -0,0 +1,136 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+
+/ {
+	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
+};
+
+&i2c0 {
+	hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		status = "okay";
+	};
+};
+
+&act8846 {
+	regulators {
+		vcc_ddr: REG1 {
+			regulator-name = "VCC_DDR";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+		};
+
+		vcc_io: REG2 {
+			regulator-name = "VCC_IO";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vdd_log: REG3 {
+			regulator-name = "VDD_LOG";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		vcc_20: REG4 {
+			regulator-name = "VCC_20";
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-always-on;
+		};
+
+		vccio_sd: REG5 {
+			regulator-name = "VCCIO_SD";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vdd10_lcd: REG6 {
+			regulator-name = "VDD10_LCD";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		vcca_codec: REG7 {
+			regulator-name = "VCCA_CODEC";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vcca_tp: REG8 {
+			regulator-name = "VCCA_TP";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vccio_pmu: REG9 {
+			regulator-name = "VCCIO_PMU";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vdd_10: REG10 {
+			regulator-name = "VDD_10";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		vcc_18: REG11 {
+			regulator-name = "VCC_18";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vcc18_lcd: REG12 {
+			regulator-name = "VCC18_LCD";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
new file mode 100644
index 0000000..c168cb2
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -0,0 +1,19 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+
+/ {
+	compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
+
+};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
new file mode 100644
index 0000000..ff642d4
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -0,0 +1,77 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "rk3288.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	memory {
+		reg = <0x0 0x80000000>;
+	};
+
+	soc {
+		gpio-keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			autorepeat;
+
+			button@0 {
+				gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+				linux,code = <116>;
+				label = "GPIO Key Power";
+				linux,input-type = <1>;
+				gpio-key,wakeup = <1>;
+				debounce-interval = <100>;
+			};
+		};
+
+		i2c0: i2c@ff650000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_xfer>;
+			status = "okay";
+		};
+
+		watchdog@ff800000 {
+			status = "okay";
+		};
+
+		serial@ff180000 {
+			status = "okay";
+		};
+
+		serial@ff190000 {
+			status = "okay";
+		};
+
+		uart2: serial@ff690000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_xfer>;
+			status = "okay";
+		};
+
+		uart3: serial@ff1b0000 {
+			status = "okay";
+		};
+
+		uart4: serial@ff1c0000 {
+			status = "okay";
+		};
+	};
+};
-- 
1.9.0


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2014-07-15 23:02 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-15 22:58 [PATCH 0/6] ARM: rockchip: add initial support for rk3288 Heiko Stübner
2014-07-15 22:59 ` [PATCH 1/6] dt-bindings: arm: add arm,cortex-a12 cpu compatible property Heiko Stübner
2014-07-16  0:56   ` Olof Johansson
2014-07-16  9:03     ` Mark Rutland
2014-07-15 23:00 ` [PATCH 2/6] ARM: rockchip: add debug uart used by rk3288 Heiko Stübner
2014-07-16  4:13   ` Doug Anderson
     [not found]     ` <CAD=FV=W3aWeT3RP5_g9r8kV8ToeHfyn57JY-py2zGVW9DF_7RQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-16  9:11       ` Heiko Stübner
2014-07-16 15:09         ` Doug Anderson
2014-07-15 23:01 ` [PATCH 3/6] ARM: Kconfig: set default gpio number for rockchip SoCs Heiko Stübner
2014-07-16  4:41   ` Doug Anderson
2014-07-15 23:01 ` [PATCH 4/6] ARM: rockchip: enable support for RK3288 SoCs Heiko Stübner
2014-07-16 19:57   ` Doug Anderson
     [not found]     ` <CAD=FV=Vp2GqwEsLt5n5176ZRvDgNLSYFSUC6G+7pV6cuATuFTw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-16 20:22       ` Heiko Stübner
2014-07-17 10:20       ` Will Deacon
2014-07-15 23:02 ` [PATCH 5/6] ARM: dts: rockchip: add core rk3288 dtsi Heiko Stübner
2014-07-16  0:02   ` Doug Anderson
2014-07-16  0:55   ` Olof Johansson
2014-07-16 20:04   ` Doug Anderson
2014-07-15 23:02 ` Heiko Stübner [this message]
2014-07-16  1:00   ` [PATCH 6/6] ARM: dts: add rk3288 evaluation board Olof Johansson
2014-07-16 20:02   ` Doug Anderson
     [not found]     ` <CAD=FV=Vo-J2cmyUZfD6KUdvw=5iaCgANsSvaSKfuJRWz1DCCeg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-16 21:22       ` Heiko Stübner
2014-07-17 10:18 ` [PATCH 0/6] ARM: rockchip: add initial support for rk3288 Will Deacon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2186895.xqgxh7zegl@diego \
    --to=heiko-4mtyjxux2i+zqb+pc5nmwq@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    --cc=eddie.cai-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).