From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Stuebner Subject: Re: [PATCH 0/3] Add leds, ir and fix regulator name on rk3328-rock64 Date: Sun, 03 Mar 2019 14:51:13 +0100 Message-ID: <21871055.QfYpCFHxls@phil> References: Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-rockchip" Errors-To: linux-rockchip-bounces+glpar-linux-rockchip=m.gmane.org-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org To: Jonas Karlman Cc: Mark Rutland , "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org" , Rob Herring , "linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org" List-Id: devicetree@vger.kernel.org Am Samstag, 2. M=E4rz 2019, 17:56:56 CET schrieb Jonas Karlman: > This patchset fixes two regulator names and adds nodes to > enable use of leds and ir on Rock64. > = > Jonas Karlman (3): > arm64: dts: rockchip: fix regulator name on rk3328-rock64 > arm64: dts: rockchip: add leds node on rk3328-rock64 > arm64: dts: rockchip: add ir-receiver node on rk3328-rock64 I've moved the ir-receiver node to its alphabetical position in the file and applied all 3 patches for 5.2 . You might want to check your mail setup though, the mail threading was broken. While all mails did contain In-Reply-To headers these didn't match the message IDs outlook.com set at all. Heiko