From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Tim Harvey <tharvey@gateworks.com>
Cc: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Device Tree Mailing List <devicetree@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>,
Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org>
Subject: Re: (EXT) Re: [PATCH] arm64: dts: imx8mm-venice-gw73xx-0x: add dt overlays for serial modes
Date: Tue, 11 Jan 2022 08:20:01 +0100 [thread overview]
Message-ID: <2226437.ElGaqSPkdT@steina-w> (raw)
In-Reply-To: <CAJ+vNU0U7HknAZcnua39r9to+kJBea6Fg3NiJ9ybZ1xygKoF4g@mail.gmail.com>
Am Dienstag, 11. Januar 2022, 01:00:21 CET schrieb Tim Harvey:
> [SNIP]
> > diff --git a/arch/arm64/boot/dts/freescale/Makefile
> > b/arch/arm64/boot/dts/freescale/Makefile index a14a6173b765..5ec8d59347b6
> > 100644
> > --- a/arch/arm64/boot/dts/freescale/Makefile
> > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > @@ -44,6 +44,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
> >
> > dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
> >
> > +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs232-rts.dtbo
> > +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs422.dtbo
> > +dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtbo
> >
> > dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb
> > dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
> >
> [SNIP]
> I'm mostly interested to see if my approach to dt fragments here and
> the naming of the files makes sense to others.
>
> This patch causes the kernel to build dtbo files for:
> arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtbo
> arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtbo
> arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtbo
>
> The intention is that these files are used by boot firmware (U-Boot)
> to adjust the dtb before passing it to the kernel.
Hi Tim,
do these dtbo actually work? I'm wondering because I was trying to useoverlays
myself and noticed that the had to be compiled with -@ for u-boot to be able
to apply them. Apparently there are 2 possibilities:
* Set "DTC_FLAGS_[dtb] := -@" yourself
See https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
commit/?id=e426d63e752bdbe7d5ba2d872319dde9ab844a07
* Use dedicated overlay target
See https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
commit/?id=15d16d6dadf6947ac7f9a686c615995c5a426ce2
You use neither of them. IIRC just naming the target file .dtbo will not apply
symbols (-Q) during dtc call. Can you verify using 'V=1'
Also I'm wondering which way is the best to go.
Best regards,
Alexander
next prev parent reply other threads:[~2022-01-11 7:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-14 21:36 [PATCH] arm64: dts: imx8mm-venice-gw73xx-0x: add dt overlays for serial modes Tim Harvey
2022-01-11 0:00 ` Tim Harvey
2022-01-11 7:20 ` Alexander Stein [this message]
2022-01-11 17:53 ` (EXT) " Tim Harvey
2022-01-12 6:58 ` (EXT) " Alexander Stein
2022-01-26 7:44 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2226437.ElGaqSPkdT@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=tharvey@gateworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).