[PATCH 0/2] fix rk3066a-rayeager board hang when cpufreq changes

Andy Yan
2016-01-14T12:33:00Z

I found the rayeager board always hang in the system boot
process or when cpufreq change. When check the BSP code[0]
from ChipSpark, I found the current vdd_arm voltage is too
low and so is the vdd_logic voltage, which should be modulated
by PWM3.

So I increase the vdd_arm voltage and enabled pwm3 as a pwm
regulator here.

[0] https://github.com/RockchipOpensourceCommunity/px2-android-kernel-3.0/blob/master/arch/arm/mach-rkpx2/board-rkpx2-sdk.c

Andy Yan (2):
ARM: dts: rockchip: increase vdd_arm voltage for rk3066a-rayeager
board
ARM: dts: rockchip: enable pwm3 as pwm regulator for rk3066a-rayeager
board

arch/arm/boot/dts/rk3066a-rayeager.dts | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html