devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Heiko Stübner" <heiko@sntech.de>
To: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Sam Ravnborg <sam@ravnborg.org>,
	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>,
	Vinod Koul <vkoul@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Serge Semin <fancer.lancer@gmail.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Palmer Dabbelt <palmer@rivosinc.com>,
	linux-riscv@lists.infradead.org
Cc: Thomas Gleixner <tglx@linutronix.de>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Conor Dooley <conor.dooley@microchip.com>,
	Masahiro Yamada <masahiroy@kernel.org>,
	Damien Le Moal <damien.lemoal@opensource.wdc.com>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Niklas Cassel <niklas.cassel@wdc.com>,
	Dillon Min <dillon.minfei@gmail.com>,
	Heng Sia <jee.heng.sia@intel.com>,
	Jose Abreu <joabreu@synopsys.com>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org,
	alsa-devel@alsa-project.org, linux-spi@vger.kernel.org,
	linux-riscv@lists.infradead.org, Conor Dooley <mail@conchuod.ie>
Subject: Re: [PATCH v2 01/16] dt-bindings: display: convert ilitek,ili9341.txt to dt-schema
Date: Tue, 28 Jun 2022 17:04:26 +0200	[thread overview]
Message-ID: <22692709.6Emhk5qWAg@diego> (raw)
In-Reply-To: <3361801.QJadu78ljV@diego>

Am Dienstag, 28. Juni 2022, 17:00:56 CEST schrieb Heiko Stübner:
> Hi Conor,
> 
> Am Montag, 27. Juni 2022, 21:39:49 CEST schrieb Conor Dooley:
> > From: Conor Dooley <conor.dooley@microchip.com>
> > 
> > A dt-schema binding for the Ilitek ili9341 was created as
> > panel/ilitek,ili9341.yaml but the txt binding was ignored in the
> > process. Move the remaining items in the txt binding to the yaml one &
> > delete it.
> > 
> > The example in the txt binding has a spi-max-frequency which disagrees
> > with the yaml replacement (and its own documentation) so change that to
> > conform with the binding. There are no users in tree of the Adafruit
> > yx240qv29 to check against.
> > 
> > Link: https://cdn-learn.adafruit.com/assets/assets/000/046/879/original/SPEC-YX240QV29-T_Rev.A__1_.pdf
> > Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
> 
> in your v1 you already got a [0]
> Reviewed-by: Rob Herring <robh@kernel.org>
> for this patch
> 
> Looking at the diffstat, which didn't change, you should
> include such tags in followup revisions, to prevent
> reviewers from double efforts.

and now I see that the review actually happened _after_ v2 was send ;-)


> [0] https://lore.kernel.org/r/20220627232054.GA3155668-robh@kernel.org
> 
> > ---
> >  .../bindings/display/ilitek,ili9341.txt       | 27 -----------
> >  .../display/panel/ilitek,ili9341.yaml         | 48 +++++++++++++------
> >  2 files changed, 34 insertions(+), 41 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
> > deleted file mode 100644
> > index 169b32e4ee4e..000000000000
> > --- a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
> > +++ /dev/null
> > @@ -1,27 +0,0 @@
> > -Ilitek ILI9341 display panels
> > -
> > -This binding is for display panels using an Ilitek ILI9341 controller in SPI
> > -mode.
> > -
> > -Required properties:
> > -- compatible:	"adafruit,yx240qv29", "ilitek,ili9341"
> > -- dc-gpios:	D/C pin
> > -- reset-gpios:	Reset pin
> > -
> > -The node for this driver must be a child node of a SPI controller, hence
> > -all mandatory properties described in ../spi/spi-bus.txt must be specified.
> > -
> > -Optional properties:
> > -- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
> > -- backlight:	phandle of the backlight device attached to the panel
> > -
> > -Example:
> > -	display@0{
> > -		compatible = "adafruit,yx240qv29", "ilitek,ili9341";
> > -		reg = <0>;
> > -		spi-max-frequency = <32000000>;
> > -		dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
> > -		reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
> > -		rotation = <270>;
> > -		backlight = <&backlight>;
> > -	};
> > diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
> > index 6058948a9764..94ca92878434 100644
> > --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
> > +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
> > @@ -23,6 +23,7 @@ properties:
> >        - enum:
> >            # ili9341 240*320 Color on stm32f429-disco board
> >            - st,sf-tc240t-9370-t
> > +          - adafruit,yx240qv29
> >        - const: ilitek,ili9341
> >  
> >    reg: true
> > @@ -47,31 +48,50 @@ properties:
> >    vddi-led-supply:
> >      description: Voltage supply for the LED driver (1.65 .. 3.3 V)
> >  
> > -additionalProperties: false
> > +unevaluatedProperties: false
> >  
> >  required:
> >    - compatible
> >    - reg
> >    - dc-gpios
> > -  - port
> > +
> > +if:
> > +  properties:
> > +    compatible:
> > +      contains:
> > +        enum:
> > +          - st,sf-tc240t-9370-t
> > +then:
> > +  required:
> > +    - port
> >  
> >  examples:
> >    - |+
> > +    #include <dt-bindings/gpio/gpio.h>
> >      spi {
> >          #address-cells = <1>;
> >          #size-cells = <0>;
> >          panel: display@0 {
> > -                 compatible = "st,sf-tc240t-9370-t",
> > -                              "ilitek,ili9341";
> > -                 reg = <0>;
> > -                 spi-3wire;
> > -                 spi-max-frequency = <10000000>;
> > -                 dc-gpios = <&gpiod 13 0>;
> > -                 port {
> > -                         panel_in: endpoint {
> > -                           remote-endpoint = <&display_out>;
> > -                      };
> > -                 };
> > -             };
> > +            compatible = "st,sf-tc240t-9370-t",
> > +                         "ilitek,ili9341";
> > +            reg = <0>;
> > +            spi-3wire;
> > +            spi-max-frequency = <10000000>;
> > +            dc-gpios = <&gpiod 13 0>;
> > +            port {
> > +                panel_in: endpoint {
> > +                    remote-endpoint = <&display_out>;
> > +                };
> > +            };
> > +        };
> > +        display@1{
> > +            compatible = "adafruit,yx240qv29", "ilitek,ili9341";
> > +            reg = <1>;
> > +            spi-max-frequency = <10000000>;
> > +            dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
> > +            reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
> > +            rotation = <270>;
> > +            backlight = <&backlight>;
> >          };
> > +    };
> >  ...
> > 
> 
> 





  reply	other threads:[~2022-06-28 15:04 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-27 19:39 [PATCH v2 00/16] Canaan devicetree fixes Conor Dooley
2022-06-27 19:39 ` [PATCH v2 01/16] dt-bindings: display: convert ilitek,ili9341.txt to dt-schema Conor Dooley
2022-06-28 15:00   ` Heiko Stübner
2022-06-28 15:04     ` Heiko Stübner [this message]
2022-06-28 16:49       ` Conor.Dooley
2022-06-27 19:39 ` [PATCH v2 02/16] dt-bindings: display: panel: allow ilitek,ili9341 in isolation Conor Dooley
2022-06-27 19:39 ` [PATCH v2 03/16] ASoC: dt-bindings: convert designware-i2s to dt-schema Conor Dooley
2022-06-27 19:39 ` [PATCH v2 04/16] spi: dt-bindings: dw-apb-ssi: update spi-{r,t}x-bus-width Conor Dooley
2022-06-27 20:21   ` Serge Semin
2022-06-28 15:26     ` Rob Herring
2022-06-27 19:39 ` [PATCH v2 05/16] dt-bindings: dma: add Canaan k210 to Synopsys DesignWare DMA Conor Dooley
2022-06-27 21:34   ` Serge Semin
2022-06-27 22:23     ` Conor.Dooley
2022-06-27 19:39 ` [PATCH v2 06/16] dt-bindings: timer: add Canaan k210 to Synopsys DesignWare timer Conor Dooley
2022-06-27 21:13   ` Serge Semin
2022-06-27 21:18     ` Conor Dooley
2022-06-27 19:39 ` [PATCH v2 07/16] dt-bindings: memory-controllers: add canaan k210 sram controller Conor Dooley
2022-06-27 19:39 ` [PATCH v2 08/16] riscv: dts: canaan: fix the k210's memory node Conor Dooley
2022-06-27 19:39 ` [PATCH v2 09/16] riscv: dts: canaan: add a specific compatible for k210's dma Conor Dooley
2022-06-27 19:39 ` [PATCH v2 10/16] riscv: dts: canaan: add a specific compatible for k210's timers Conor Dooley
2022-06-27 19:39 ` [PATCH v2 11/16] riscv: dts: canaan: fix mmc node names Conor Dooley
2022-06-27 19:40 ` [PATCH v2 12/16] riscv: dts: canaan: fix kd233 display spi frequency Conor Dooley
2022-06-27 19:40 ` [PATCH v2 13/16] riscv: dts: canaan: use custom compatible for k210 i2s Conor Dooley
2022-06-27 19:40 ` [PATCH v2 14/16] riscv: dts: canaan: remove spi-max-frequency from controllers Conor Dooley
2022-06-27 19:40 ` [PATCH v2 15/16] riscv: dts: canaan: fix bus {ranges,reg} warnings Conor Dooley
2022-06-27 19:40 ` [PATCH v2 16/16] riscv: dts: canaan: build all devicetress if SOC_CANAAN Conor Dooley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=22692709.6Emhk5qWAg@diego \
    --to=heiko@sntech.de \
    --cc=Eugeniy.Paltsev@synopsys.com \
    --cc=airlied@linux.ie \
    --cc=alsa-devel@alsa-project.org \
    --cc=aou@eecs.berkeley.edu \
    --cc=broonie@kernel.org \
    --cc=conor.dooley@microchip.com \
    --cc=damien.lemoal@opensource.wdc.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dillon.minfei@gmail.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=fancer.lancer@gmail.com \
    --cc=geert@linux-m68k.org \
    --cc=jee.heng.sia@intel.com \
    --cc=joabreu@synopsys.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=mail@conchuod.ie \
    --cc=masahiroy@kernel.org \
    --cc=niklas.cassel@wdc.com \
    --cc=palmer@dabbelt.com \
    --cc=palmer@rivosinc.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).