Re: [PATCH 2/2] arm64: dts: qcom: sm8550-mtp: Add UFS host controller and PHY node

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 16/11/2022 13:51, Abel Vesa wrote:
> Enable UFS host controller and PHY node on SM8550 MTP board.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 22 ++++++++++++++++++++++
>   1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
> index d4c8d5b2497e..fef7793a7dec 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
> @@ -417,3 +417,25 @@ data-pins {
>   &uart7 {
>   	status = "okay";
>   };
> +
> +&ufs_mem_hc {
> +	status = "okay";
Status last, please.

> +
> +	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
> +
> +	vcc-supply = <&vreg_l17b_2p5>;
> +	vcc-max-microamp = <1300000>;
All these -microamp properties are downstream and do not exist in the 
mainline kernel. Remove them.

Konrad
> +	vccq-supply = <&vreg_l1g_1p2>;
> +	vccq-max-microamp = <1200000>;
> +	vccq2-supply = <&vreg_l3g_1p2>;
> +	vccq2-max-microamp = <100>;
> +};
> +
> +&ufs_mem_phy {
> +	status = "okay";
> +
> +	vdda-phy-supply = <&vreg_l1d_0p88>;
> +	vdda-phy-max-microamp = <188000>;
> +	vdda-pll-supply = <&vreg_l3e_1p2>;
> +	vdda-pll-max-microamp = <18300>;
> +};