Re: [PATCH v15 0/7] Enable Bluetooth functionality for WCN3990

[Balakrishna Godavarthi <bgodavar@codeaurora.org>]

Hi Marcel,

On 2018-08-03 18:16, Marcel Holtmann wrote:
> Hi Balakrishna,
> 
>> These patches enables Bluetooth functinalties for new Qualcomm
>> Bluetooth chip wnc3990. As this is latest chip with new features,
>> along with some common features to old chip "qcom,qca6174-bt".
>> we have updated names of functions that are used for both the chips
>> to keep this generic and would help in future when we would have new
>> BT SoC.
>> 
>> The below are difference between new and old chips.
>> 
>> *Power:
>> *New chip: we use voltage regulators to turn on/off the chip and we
>>  must send a command on Tx line to turn on/off the chip completely.
>> *Old chip: We turn on/off by setting a GPIO.
>> 
>> *Note: Turning on sequence differs between two chips.
>> 
>> *Firmware download:
>>  Only firmware file name differ from New and Old chip.
>> 
>>  So we reused some functions/structure/variables which are used for 
>> old
>>  chip to New chip by generic naming (may be future chips may use same 
>> functions).
>> 
>> * As we have multiple changes for functions names,we have tested these 
>> patches
>>   on both chips.
>> 
>> v15:
>> * fixed nit issue in hci_qca.
>> 
>> v13:
>> * Segregated optional and required properties for wcn3990.
>> 
>> v12:
>> * removed iteration loop in qca_init_wcn3990
>> * updated review comments.
>> 
>> v11:
>> * removed regulator current from dtbindings
>> * addressed review comments.
>> 
>> v10:
>> * update current load with actual values of WCN3990.
>> * added support  for itterative connect with BT chip if it fails to 
>> respond to the HOST.
>> * Added regulator current dtbindings.
>> * addressed review comments.
>> 
>> v9:
>> * removed smps regs.
>> * hidded flow control in respective functions.
>> * moved qca_soc_ver to qca_setup
>> * addressed review comments.
>> 
>> v8:
>>  * Squashed [v7 2/8] and [v7 3/8] to one patch.
>>  * updated functions to set and get the UART speeds.
>>  * addressed review comments.
>> 
>> v7:
>>  * Renamed all the possible function of ROME to generic.
>>  * updated with review comments for hci_qca and btqca
>>  * fixed kbuild errors.
>>  * created wrapper functions for re-usable blocks.
>> 
>> v6:
>>  * Hooked up qca_power to qca_serdev.
>>  * renamed all the naming inconsistency functions with qca_*
>>  * leveraged common code of ROME for wcn3990.
>>  * created wrapper functions for re-usable blocks.
>>  * updated function of _*regulator_enable and _*regualtor_disable.
>>  * removed redundant comments and functions.
>>  * add code to derive the firmware files based on ROM Version.
>>  * created new patch for common function of ROME and wcn3990.
>>  * enables Qualcomm chip to operate at 3.2Mbps.
>>  * updated names of functions that are used for both the chips to keep 
>> this generic.
>> 
>> v5:
>>  * updated with review comments for hci_qca and btqca
>> 
>> v4:
>>  * rebased all changes on top of bluetooth-next.
>>  * addressed review comments.
>>  * New patch created for firmware download.
>> 
>> v3:
>>  * Rebased all changes on top of bluetooth-next.
>>  * dt-bindings: net: bluetooth: Add device tree bindings for QTI chip 
>> wcn3990
>>    - added dt-binding snippet for bluetooth chip wcn3990.
>>  * Bluetooth: Add support for wcn3990 soc.
>>    - updated BT_INFO with bt_dev_info, where ever necessary.
>> 
>> v2:
>>   * Add support for wcn3990:
>>    These changes are aligned as per serdev frame work.
>>          We implemented these changes on top of 
>> https://patchwork.kernel.org/patch/10316093/
>>        As this patch enable serdev for one of the Qualcomm BT chip.
>> 
>>        The changes in the patch include.
>>        - Adding support to voting up/down regulators for WCN3990.
>>           - Bluetooth firmware download for wcn3990.
>> 
>>  * Add device tree bindings for Atheros chips:
>>          These changes are on top of 
>> https://patchwork.kernel.org/patch/10316097/.
>>          - Description of device tree bindings.
>> 
>> Balakrishna Godavarthi (7):
>>  dt-bindings: net: bluetooth: Add device tree bindings for QTI chip
>>    wcn3990
>>  Bluetooth: btqca: Rename ROME specific functions to generic functions
>>  Bluetooth: btqca: Redefine qca_uart_setup() to generic function.
>>  Bluetooth: hci_qca: Add wrapper functions for setting UART speed
>>  Bluetooth: hci_qca: Enable 3.2 Mbps operating speed.
>>  Bluetooth: btqca: Add wcn3990 firmware download support.
>>  Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990
>> 
>> .../bindings/net/qualcomm-bluetooth.txt       |  29 +-
>> drivers/bluetooth/btqca.c                     | 117 +++--
>> drivers/bluetooth/btqca.h                     |  22 +-
>> drivers/bluetooth/hci_qca.c                   | 486 +++++++++++++++---
>> 4 files changed, 539 insertions(+), 115 deletions(-)
> 
> all 7 patches have been applied to bluetooth-next tree.
> 
> If we need to fix things, we fix them with additional patches instead
> of respinning the series.
> 
> Regards
> 
> Marcel

Thanks for the update Marcel.

@Matthias, Thanks for reviewing patches.

-- 
Regards
Balakrishna.