* [PATCH] ARM: dts: Add rk808 PMIC to rk3288-evb-rk808
@ 2014-08-26 17:28 Doug Anderson
[not found] ` <1409074123-17449-1-git-send-email-dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
0 siblings, 1 reply; 2+ messages in thread
From: Doug Anderson @ 2014-08-26 17:28 UTC (permalink / raw)
To: Heiko Stuebner
Cc: Chris Zhong, Sonny Rao, Eddie Cai,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, huang lin,
Doug Anderson, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, linux-lFZ/pmaqli7XmaaqVzeoHQ,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
This adds initial support. For now, regulators are always on and we
don't specify the input supply for all of the regulators.
Signed-off-by: huang lin <hl-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Signed-off-by: Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
---
This patch is based on Chris's WIP rk808 series.
arch/arm/boot/dts/rk3288-evb-rk808.dts | 131 +++++++++++++++++++++++++++++++++
1 file changed, 131 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index 9a88b6c..513c88e 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -16,3 +16,134 @@
/ {
compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
};
+
+&i2c0 {
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ clock-output-names = "xin32k", "rk808-clkout2";
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ reg = <0x1b>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+
+ vcc8-supply = <&vcc_18>;
+ vcc9-supply = <&vcc_io>;
+ vcc10-supply = <&vcc_io>;
+ vcc12-supply = <&vcc_io>;
+ vddio-supply = <&vccio_pmu>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd_arm";
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ };
+
+ vccio_pmu: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_pmu";
+ };
+
+ vcc_tp: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_tp";
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ };
+
+ vcc18_lcd: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ };
+
+ vcca_codec: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcca_codec";
+ };
+
+ vcc_wl: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_wl";
+ };
+
+ vcc_lcd: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_lcd";
+ };
+ };
+ };
+};
--
2.1.0.rc2.206.gedb03e5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 2+ messages in thread[parent not found: <1409074123-17449-1-git-send-email-dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>]
* Re: [PATCH] ARM: dts: Add rk808 PMIC to rk3288-evb-rk808 [not found] ` <1409074123-17449-1-git-send-email-dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org> @ 2014-09-09 11:22 ` Heiko Stübner 0 siblings, 0 replies; 2+ messages in thread From: Heiko Stübner @ 2014-09-09 11:22 UTC (permalink / raw) To: Doug Anderson Cc: Chris Zhong, Sonny Rao, Eddie Cai, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, huang lin, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg, galak-sgV2jX0FEOL9JmXXK+q4OQ, linux-lFZ/pmaqli7XmaaqVzeoHQ, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-kernel-u79uwXL29TY76Z2rM5mHXA Am Dienstag, 26. August 2014, 10:28:43 schrieb Doug Anderson: > This adds initial support. For now, regulators are always on and we > don't specify the input supply for all of the regulators. The basic rk808 mfd including the bindings got accepted, so Added to v3.18-next/dts branch with the small modification described below > > Signed-off-by: huang lin <hl-TNX95d0MmH7DzftRWevZcw@public.gmane.org> > Signed-off-by: Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org> > --- > This patch is based on Chris's WIP rk808 series. > > arch/arm/boot/dts/rk3288-evb-rk808.dts | 131 > +++++++++++++++++++++++++++++++++ 1 file changed, 131 insertions(+) > > diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts > b/arch/arm/boot/dts/rk3288-evb-rk808.dts index 9a88b6c..513c88e 100644 > --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts > +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts > @@ -16,3 +16,134 @@ > / { > compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; > }; > + > +&i2c0 { > + status = "okay"; > + > + rk808: pmic@1b { > + compatible = "rockchip,rk808"; > + clock-output-names = "xin32k", "rk808-clkout2"; I moved the clock-output-names below the #clock-cells and the reg from below to here. > + interrupt-parent = <&gpio0>; > + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int>; > + reg = <0x1b>; > + rockchip,system-power-controller; > + wakeup-source; > + #clock-cells = <1>; > + > + vcc8-supply = <&vcc_18>; > + vcc9-supply = <&vcc_io>; > + vcc10-supply = <&vcc_io>; > + vcc12-supply = <&vcc_io>; > + vddio-supply = <&vccio_pmu>; > + > + regulators { > + vdd_cpu: DCDC_REG1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1300000>; > + regulator-name = "vdd_arm"; > + }; > + > + vdd_gpu: DCDC_REG2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <850000>; > + regulator-max-microvolt = <1250000>; > + regulator-name = "vdd_gpu"; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vcc_ddr"; > + }; > + > + vcc_io: DCDC_REG4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc_io"; > + }; > + > + vccio_pmu: LDO_REG1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vccio_pmu"; > + }; > + > + vcc_tp: LDO_REG2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc_tp"; > + }; > + > + vdd_10: LDO_REG3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-name = "vdd_10"; > + }; > + > + vcc18_lcd: LDO_REG4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc18_lcd"; > + }; > + > + vccio_sd: LDO_REG5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vccio_sd"; > + }; > + > + vdd10_lcd: LDO_REG6 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-name = "vdd10_lcd"; > + }; > + > + vcc_18: LDO_REG7 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc_18"; > + }; > + > + vcca_codec: LDO_REG8 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcca_codec"; > + }; > + > + vcc_wl: SWITCH_REG1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vcc_wl"; > + }; > + > + vcc_lcd: SWITCH_REG2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vcc_lcd"; > + }; > + }; > + }; > +}; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-09-09 11:22 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-08-26 17:28 [PATCH] ARM: dts: Add rk808 PMIC to rk3288-evb-rk808 Doug Anderson
[not found] ` <1409074123-17449-1-git-send-email-dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2014-09-09 11:22 ` Heiko Stübner
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).