From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Stuebner Subject: Re: [PATCH v2 1/3] ARM: dts: rockchip: Add support for phyCORE-RK3288 SoM Date: Fri, 07 Apr 2017 00:21:43 +0200 Message-ID: <2316800.SYqXzj6arr@phil> References: <1491483866-18368-1-git-send-email-w.egorov@phytec.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7Bit Return-path: In-Reply-To: <1491483866-18368-1-git-send-email-w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Wadim Egorov Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Am Donnerstag, 6. April 2017, 15:04:24 CEST schrieb Wadim Egorov: > The phyCORE-RK3288 is a SoM (System on Module) containing a RK3288 SoC. > The module can be connected to different carrier boards. > It can be also equipped with different RAM, SPI flash and eMMC variants. > The Rapid Development Kit option is using the following setup: > > - 1 GB DDR3 RAM (2 Banks) > - 1x 4 KB EEPROM > - DP83867 Gigabit Ethernet PHY > - 16 MB SPI Flash > - 4 GB eMMC Flash > > Signed-off-by: Wadim Egorov applied all 3 for 4.12 . One minor change was making the touchscreen node name in patch2 read touchscreen@44 Same rationale as before, nodes should be named after the device-category Heiko -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html