Re: [Upstream] [PATCH v3] arm64: dts: imx8mp-phyboard-pollux-rdk: Add support for PCIe

[Yannic Moog <Y.Moog@phytec.de>]

On Fri, 2024-08-23 at 10:01 +0200, Benjamin Hahn wrote:
> Add support for the Mini PCIe slot.
> 
> Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>

> ---
> Changes in v3:
> - change order of properties for pcie phy node
> - Link to v2:
> https://lore.kernel.org/r/20240821-wip-bhahn-add_pcie_support-v2-1-9c92d8488ab2@phytec.de
> 
> Changes in v2:
> - change pcie regulator to reg_vcc_3v3_sw
> - add wake gpio to pcie pinctrl and order the gpios
> - Link to v1:
> https://lore.kernel.org/r/20240813-wip-bhahn-add_pcie_support-v1-1-c1bb062b4e1f@phytec.de
> ---
>  .../dts/freescale/imx8mp-phyboard-pollux-rdk.dts   | 27 ++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> index 00a240484c25..bea479b5203a 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> @@ -6,6 +6,7 @@
>  
>  /dts-v1/;
>  
> +#include <dt-bindings/phy/phy-imx8-pcie.h>
>  #include <dt-bindings/leds/leds-pca9532.h>
>  #include <dt-bindings/pwm/pwm.h>
>  #include "imx8mp-phycore-som.dtsi"
> @@ -195,6 +196,23 @@ &snvs_pwrkey {
>  	status = "okay";
>  };
>  
> +&pcie_phy {
> +	clocks = <&hsio_blk_ctrl>;
> +	clock-names = "ref";
> +	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
> +	fsl,clkreq-unsupported;
> +	status = "okay";
> +};
> +
> +/* Mini PCIe */
> +&pcie {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pcie0>;
> +	reset-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
> +	vpcie-supply = <&reg_vcc_3v3_sw>;
> +	status = "okay";
> +};
> +
>  &pwm3 {
>  	status = "okay";
>  	pinctrl-names = "default";
> @@ -366,6 +384,15 @@ MX8MP_IOMUXC_SD2_WP__GPIO2_IO20		0x12
>  		>;
>  	};
>  
> +	pinctrl_pcie0: pcie0grp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08     0x40
> +			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10     0x60
> +			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x60 /* open drain, pull up */
> +			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14     0x40
> +		>;
> +	};
> +
>  	pinctrl_pwm3: pwm3grp {
>  		fsl,pins = <
>  			MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT		0x12
> 
> ---
> base-commit: 7c626ce4bae1ac14f60076d00eafe71af30450ba
> change-id: 20240813-wip-bhahn-add_pcie_support-b9bd75fc4d98
> 
> Best regards,