Re: [PATCH] media: Convert to using %pOF instead of full_name

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Sylwester,

On Wednesday 19 Jul 2017 11:41:37 Sylwester Nawrocki wrote:
> On 07/18/2017 11:43 PM, Rob Herring wrote:
> > Now that we have a custom printf format specifier, convert users of
> > full_name to use %pOF instead. This is preparation to remove storing
> > of the full path string for each node.
> > 
> > Signed-off-by: Rob Herring <robh@kernel.org>
> > 
> > ---
> > 
> >   drivers/media/i2c/s5c73m3/s5c73m3-core.c       |  3 +-
> >   drivers/media/i2c/s5k5baf.c                    |  7 ++--
> >   drivers/media/platform/am437x/am437x-vpfe.c    |  4 +-
> >   drivers/media/platform/atmel/atmel-isc.c       |  4 +-
> >   drivers/media/platform/davinci/vpif_capture.c  | 16 ++++----
> >   drivers/media/platform/exynos4-is/fimc-is.c    |  8 ++--
> >   drivers/media/platform/exynos4-is/fimc-lite.c  |  3 +-
> >   drivers/media/platform/exynos4-is/media-dev.c  |  8 ++--
> >   drivers/media/platform/exynos4-is/mipi-csis.c  |  4 +-
> >   drivers/media/platform/mtk-mdp/mtk_mdp_comp.c  |  6 +--
> >   drivers/media/platform/mtk-mdp/mtk_mdp_core.c  |  8 ++--
> >   drivers/media/platform/omap3isp/isp.c          |  8 ++--
> >   drivers/media/platform/pxa_camera.c            |  2 +-
> >   drivers/media/platform/rcar-vin/rcar-core.c    |  4 +-
> >   drivers/media/platform/soc_camera/soc_camera.c |  6 +--
> >   drivers/media/platform/xilinx/xilinx-vipp.c    | 52 ++++++++++----------
> >   drivers/media/v4l2-core/v4l2-async.c           |  4 +-
> >   drivers/media/v4l2-core/v4l2-clk.c             |  3 +-
> >   include/media/v4l2-clk.h                       |  4 +-
> >   19 files changed, 71 insertions(+), 83 deletions(-)
> > 
> > diff --git a/drivers/media/platform/xilinx/xilinx-vipp.c
> > b/drivers/media/platform/xilinx/xilinx-vipp.c index
> > ac4704388920..9233ad0b1b6b 100644
> > --- a/drivers/media/platform/xilinx/xilinx-vipp.c
> > +++ b/drivers/media/platform/xilinx/xilinx-vipp.c
> > @@ -144,9 +144,8 @@ static int xvip_graph_build_one(struct
> > xvip_composite_device *xdev,
> >   		remote = ent->entity;
> >   		if (link.remote_port >= remote->num_pads) {
> > -			dev_err(xdev->dev, "invalid port number %u on %s\n",
> > -				link.remote_port,
> > -				to_of_node(link.remote_node)->full_name);
> > +			dev_err(xdev->dev, "invalid port number %u on %pOF\n",
> > +				link.remote_port, link.remote_node);
> 
> Shouldn't there be to_of_node(link.remote_node) instead of link.remote_node 
?

Good catch, I had missed that one.

> >   			v4l2_fwnode_put_link(&link);
> >   			ret = -EINVAL;
> >   			break;

[snip]

-- 
Regards,

Laurent Pinchart