From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: gregkh@linuxfoundation.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, peter.chen@kernel.org,
Xu Yang <xu.yang_2@nxp.com>
Cc: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, jun.li@nxp.com
Subject: Re: [PATCH v3 5/6] arm64: dts: imx95: add USB2.0 nodes
Date: Thu, 27 Feb 2025 16:15:37 +0100 [thread overview]
Message-ID: <23849030.6Emhk5qWAg@steina-w> (raw)
In-Reply-To: <20250227095348.837223-6-xu.yang_2@nxp.com>
Hi,
Am Donnerstag, 27. Februar 2025, 10:53:47 CET schrieb Xu Yang:
> Add USB2.0 controller and phy nodes.
>
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
I was able to test this in peripheral mode on TQMa95xxSA + MB-SMARC-2.
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa95xxSA
> ---
> Changes in v3:
> - no changes
> Changes in v2:
> - add Rb tag
> ---
> arch/arm64/boot/dts/freescale/imx95.dtsi | 30 ++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
> index 3af13173de4b..48c2033971bf 100644
> --- a/arch/arm64/boot/dts/freescale/imx95.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
> @@ -463,6 +463,13 @@ its: msi-controller@48040000 {
> };
> };
>
> + usbphynop: usbphynop {
> + compatible = "usb-nop-xceiv";
> + clocks = <&scmi_clk IMX95_CLK_HSIO>;
> + clock-names = "main_clk";
> + #phy-cells = <0>;
> + };
> +
> soc {
> compatible = "simple-bus";
> #address-cells = <2>;
> @@ -1579,6 +1586,29 @@ usb3_phy: phy@4c1f0040 {
> status = "disabled";
> };
>
> + usb2: usb@4c200000 {
> + compatible = "fsl,imx95-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
> + reg = <0x0 0x4c200000 0x0 0x200>;
> + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&scmi_clk IMX95_CLK_HSIO>,
> + <&scmi_clk IMX95_CLK_32K>;
> + clock-names = "usb_ctrl_root", "usb_wakeup";
> + iommus = <&smmu 0xf>;
> + phys = <&usbphynop>;
> + power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
> + fsl,usbmisc = <&usbmisc 0>;
> + status = "disabled";
> + };
> +
> + usbmisc: usbmisc@4c200200 {
> + compatible = "fsl,imx95-usbmisc", "fsl,imx7d-usbmisc",
> + "fsl,imx6q-usbmisc";
> + reg = <0x0 0x4c200200 0x0 0x200>,
> + <0x0 0x4c010014 0x0 0x04>;
> + #index-cells = <1>;
> + };
> +
> pcie0: pcie@4c300000 {
> compatible = "fsl,imx95-pcie";
> reg = <0 0x4c300000 0 0x10000>,
>
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
next prev parent reply other threads:[~2025-02-27 15:15 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-27 9:53 [PATCH v3 0/6] add USB2.0 support for i.MX95-19x19 EVK board Xu Yang
2025-02-27 9:53 ` [PATCH v3 1/6] dt-bindings: usb: chipidea: Add i.MX95 compatible string 'fsl,imx95-usb' Xu Yang
2025-02-27 9:53 ` [PATCH v3 2/6] dt-bindings: usb: usbmisc-imx: add support for i.MX95 platform Xu Yang
2025-02-27 9:53 ` [PATCH v3 3/6] usb: chipidea: imx: add wakeup interrupt handling Xu Yang
2025-02-27 9:53 ` [PATCH v3 4/6] usb: chipidea: imx: add HSIO Block Control wakeup setting Xu Yang
2025-02-27 15:12 ` Alexander Stein
2025-02-28 2:33 ` Xu Yang
2025-02-28 7:22 ` Alexander Stein
2025-02-28 9:16 ` Xu Yang
2025-02-28 10:41 ` Alexander Stein
2025-03-03 3:28 ` Xu Yang
2025-02-27 9:53 ` [PATCH v3 5/6] arm64: dts: imx95: add USB2.0 nodes Xu Yang
2025-02-27 15:15 ` Alexander Stein [this message]
2025-02-27 9:53 ` [PATCH v3 6/6] arm64: dts: imx95-19x19-evk: enable USB2.0 node Xu Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=23849030.6Emhk5qWAg@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=imx@lists.linux.dev \
--cc=jun.li@nxp.com \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=peter.chen@kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=xu.yang_2@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox