public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH] ARM: dts: rockchip: set dw_mmc max-freq 150Mhz
@ 2014-12-04  2:49 Addy Ke
       [not found] ` <1417661375-2872-1-git-send-email-addy.ke-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
  0 siblings, 1 reply; 3+ messages in thread
From: Addy Ke @ 2014-12-04  2:49 UTC (permalink / raw)
  To: heiko-4mtYJXux2i+zQB+pC5nmwQ, dianders-F7+t8E8rja9g9hUCZPvPmw,
	amstan-F7+t8E8rja9g9hUCZPvPmw, sonnyrao-F7+t8E8rja9g9hUCZPvPmw,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A, pawel.moll-5wv7dgnIgG8,
	mark.rutland-5wv7dgnIgG8, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
	galak-sgV2jX0FEOL9JmXXK+q4OQ
  Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ, devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	olof-nZhT3qVonbNeoWH0uzbU5w, hj-TNX95d0MmH7DzftRWevZcw,
	kever.yang-TNX95d0MmH7DzftRWevZcw, xjq-TNX95d0MmH7DzftRWevZcw,
	huangtao-TNX95d0MmH7DzftRWevZcw, zyw-TNX95d0MmH7DzftRWevZcw,
	yzq-TNX95d0MmH7DzftRWevZcw, zhenfu.fang-TNX95d0MmH7DzftRWevZcw,
	cf-TNX95d0MmH7DzftRWevZcw, zhangqing-TNX95d0MmH7DzftRWevZcw,
	hl-TNX95d0MmH7DzftRWevZcw, wei.luo-TNX95d0MmH7DzftRWevZcw,
	Addy Ke

All of mmc controllers include SDMMC, SDIO0, SDIO1, and EMMC on RK3288
are limited to 150Mhz. It was mainly caused by two reasons:
- RK3288's IO pad(except DDR IO pad) is generic, which can only support
  the max of 150Mhz.
- Mmc controller was designed at 150Mhz, and the pressure test by IC team
  was based on this freequency point.

Signed-off-by: Addy Ke <addy.ke-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
 arch/arm/boot/dts/rk3288.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index acb6a2f..9c35a1d 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -149,6 +149,7 @@
 
 	sdmmc: dwmmc@ff0c0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 150000000>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x100>;
@@ -159,6 +160,7 @@
 
 	sdio0: dwmmc@ff0d0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 150000000>;
 		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x100>;
@@ -169,6 +171,7 @@
 
 	sdio1: dwmmc@ff0e0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 150000000>;
 		clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x100>;
@@ -179,6 +182,7 @@
 
 	emmc: dwmmc@ff0f0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 150000000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <0x100>;
-- 
1.8.3.2


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH] ARM: dts: rockchip: set dw_mmc max-freq 150Mhz
       [not found] ` <1417661375-2872-1-git-send-email-addy.ke-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
@ 2014-12-04 16:08   ` Doug Anderson
  2014-12-05 21:45   ` Heiko Stübner
  1 sibling, 0 replies; 3+ messages in thread
From: Doug Anderson @ 2014-12-04 16:08 UTC (permalink / raw)
  To: Addy Ke
  Cc: Heiko Stübner, Alexandru Stan, Sonny Rao, Rob Herring,
	Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	open list:ARM/Rockchip SoC..., Olof Johansson, han jiang,
	Kever Yang, Jianqun Xu, Tao Huang, Chris,
	姚智情

Addy,

On Wed, Dec 3, 2014 at 6:49 PM, Addy Ke <addy.ke-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:
> All of mmc controllers include SDMMC, SDIO0, SDIO1, and EMMC on RK3288
> are limited to 150Mhz. It was mainly caused by two reasons:
> - RK3288's IO pad(except DDR IO pad) is generic, which can only support
>   the max of 150Mhz.
> - Mmc controller was designed at 150Mhz, and the pressure test by IC team
>   was based on this freequency point.
>
> Signed-off-by: Addy Ke <addy.ke-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> ---
>  arch/arm/boot/dts/rk3288.dtsi | 4 ++++
>  1 file changed, 4 insertions(+)

Your explanation is reasonable.  The 150MHz rate is also listed in the
latest datasheet.  It's unfortunate that we won't get full speed of
SDR104 or hs200 on this SoC, but correctness certainly outweighs
performance.

Reviewed-by: Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

I have tested that this prevents the speed from going above 150MHz on
rk3288-pinky on SD Cards, so:

Tested-by: Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>

-Doug
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] ARM: dts: rockchip: set dw_mmc max-freq 150Mhz
       [not found] ` <1417661375-2872-1-git-send-email-addy.ke-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
  2014-12-04 16:08   ` Doug Anderson
@ 2014-12-05 21:45   ` Heiko Stübner
  1 sibling, 0 replies; 3+ messages in thread
From: Heiko Stübner @ 2014-12-05 21:45 UTC (permalink / raw)
  To: Addy Ke
  Cc: dianders-F7+t8E8rja9g9hUCZPvPmw, amstan-F7+t8E8rja9g9hUCZPvPmw,
	sonnyrao-F7+t8E8rja9g9hUCZPvPmw, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
	pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
	ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
	galak-sgV2jX0FEOL9JmXXK+q4OQ, linux-lFZ/pmaqli7XmaaqVzeoHQ,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	olof-nZhT3qVonbNeoWH0uzbU5w, hj-TNX95d0MmH7DzftRWevZcw,
	kever.yang-TNX95d0MmH7DzftRWevZcw, xjq-TNX95d0MmH7DzftRWevZcw,
	huangtao-TNX95d0MmH7DzftRWevZcw, zyw-TNX95d0MmH7DzftRWevZcw,
	yzq-TNX95d0MmH7DzftRWevZcw, zhenfu.fang-TNX95d0MmH7DzftRWevZcw,
	cf-TNX95d0MmH7DzftRWevZcw, zhangqing-TNX95d0MmH7DzftRWevZcw,
	hl-TNX95d0MmH7DzftRWevZcw, wei.luo-TNX95d0MmH7DzftRWevZcw

Am Donnerstag, 4. Dezember 2014, 10:49:35 schrieb Addy Ke:
> All of mmc controllers include SDMMC, SDIO0, SDIO1, and EMMC on RK3288
> are limited to 150Mhz. It was mainly caused by two reasons:
> - RK3288's IO pad(except DDR IO pad) is generic, which can only support
>   the max of 150Mhz.
> - Mmc controller was designed at 150Mhz, and the pressure test by IC team
>   was based on this freequency point.
> 
> Signed-off-by: Addy Ke <addy.ke-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

applied to my wip dts branch for 3.20 (on github)


Thanks
Heiko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2014-12-05 21:45 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-12-04  2:49 [PATCH] ARM: dts: rockchip: set dw_mmc max-freq 150Mhz Addy Ke
     [not found] ` <1417661375-2872-1-git-send-email-addy.ke-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2014-12-04 16:08   ` Doug Anderson
2014-12-05 21:45   ` Heiko Stübner

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox