Re: [PATCH v4 5/6] riscv: dts: starfive: Add VisionFive 2 Lite board device tree

[E Shattow <e@freeshell.de>]

On 11/24/25 23:56, Hal Feng wrote:
> VisionFive 2 Lite is a mini SBC based on the StarFive JH7110S SoC.
> 
> Board features:
> - JH7110S SoC
> - 4/8 GiB LPDDR4 DRAM
> - AXP15060 PMIC
> - 40 pin GPIO header
> - 1x USB 3.0 host port
> - 3x USB 2.0 host port
> - 1x M.2 M-Key (size: 2242)
> - 1x MicroSD slot (optional non-removable 64GiB eMMC)
> - 1x QSPI Flash
> - 1x I2C EEPROM
> - 1x 1Gbps Ethernet port
> - SDIO-based Wi-Fi & UART-based Bluetooth
> - 1x HDMI port
> - 1x 2-lane DSI
> - 1x 2-lane CSI
> 
> VisionFive 2 Lite schematics: https://doc-en.rvspace.org/VisionFive2Lite/PDF/VF2_LITE_V1.10_TF_20250818_SCH.pdf
> VisionFive 2 Lite Quick Start Guide: https://doc-en.rvspace.org/VisionFive2Lite/VisionFive2LiteQSG/index.html
> More documents: https://doc-en.rvspace.org/Doc_Center/visionfive_2_lite.html
> 
> Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
> Tested-by: Matthias Brugger <mbrugger@suse.com>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> ---
>  arch/riscv/boot/dts/starfive/Makefile         |  1 +
>  .../jh7110-starfive-visionfive-2-lite.dts     | 20 +++++++++++++++++++
>  2 files changed, 21 insertions(+)
>  create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dts
> 
> diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
> index 62b659f89ba7..2b1e7fcd6f84 100644
> --- a/arch/riscv/boot/dts/starfive/Makefile
> +++ b/arch/riscv/boot/dts/starfive/Makefile
> @@ -13,5 +13,6 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-mars.dtb
>  dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-emmc.dtb
>  dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-lite.dtb
>  dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-pine64-star64.dtb
> +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-lite.dtb
>  dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
>  dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dts
> new file mode 100644
> index 000000000000..b96eea4fa7d5
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dts
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2025 StarFive Technology Co., Ltd.
> + * Copyright (C) 2025 Hal Feng <hal.feng@starfivetech.com>
> + */
> +
> +/dts-v1/;
> +#include "jh7110-starfive-visionfive-2-lite.dtsi"
> +
> +/ {
> +	model = "StarFive VisionFive 2 Lite";

> +	compatible = "starfive,visionfive-2-lite", "starfive,jh7110s";

Add "starfive,jh7110" to the compatible list as the least-compatible
(left-to-right order last item):

compatible = "starfive,visionfive-2-lite", "starfive,jh7110s",
"starfive,jh7110";

or if there is review feedback that no new compatible should be added,
then as usual for new JH-7110 boards:

compatible = "starfive,visionfive-2-lite", "starfive,jh7110";

> +};
> +
> +&mmc0 {
> +	bus-width = <4>;
> +	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_HIGH>;
> +	disable-wp;
> +	cap-sd-highspeed;
> +};

-E