devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Sakari Ailus <sakari.ailus@iki.fi>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	pali.rohar@gmail.com
Subject: Re: [RFC 09/18] omap3isp: Replace mmio_base_phys array with the histogram block base
Date: Sun, 08 Mar 2015 01:28:18 +0200	[thread overview]
Message-ID: <2415325.xPjzqFQXie@avalon> (raw)
In-Reply-To: <1425764475-27691-10-git-send-email-sakari.ailus@iki.fi>

Hi Sakari,

Thank you for the patch.

On Saturday 07 March 2015 23:41:06 Sakari Ailus wrote:
> Only the histogram sub-block driver uses the physical address. Do not store
> it for other sub-blocks.
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/media/platform/omap3isp/isp.c     |    3 ++-
>  drivers/media/platform/omap3isp/isp.h     |    6 +++---
>  drivers/media/platform/omap3isp/isphist.c |    2 +-
>  3 files changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/media/platform/omap3isp/isp.c
> b/drivers/media/platform/omap3isp/isp.c index c045318..68d7edfc 100644
> --- a/drivers/media/platform/omap3isp/isp.c
> +++ b/drivers/media/platform/omap3isp/isp.c
> @@ -2247,7 +2247,8 @@ static int isp_map_mem_resource(struct platform_device
> *pdev, if (IS_ERR(isp->mmio_base[res]))
>  		return PTR_ERR(isp->mmio_base[res]);
> 
> -	isp->mmio_base_phys[res] = mem->start;
> +	if (res == OMAP3_ISP_IOMEM_HIST)
> +		isp->mmio_hist_base_phys = mem->start;
> 
>  	return 0;
>  }
> diff --git a/drivers/media/platform/omap3isp/isp.h
> b/drivers/media/platform/omap3isp/isp.h index b932a6f..9535524 100644
> --- a/drivers/media/platform/omap3isp/isp.h
> +++ b/drivers/media/platform/omap3isp/isp.h
> @@ -138,8 +138,8 @@ struct isp_xclk {
>   * @irq_num: Currently used IRQ number.
>   * @mmio_base: Array with kernel base addresses for ioremapped ISP register
> *             regions.
> - * @mmio_base_phys: Array with physical L4 bus addresses for ISP register
> - *                  regions.
> + * @mmio_hist_base_phys: Physical L4 bus address for ISP hist block
> register + *			 region.
>   * @mapping: IOMMU mapping
>   * @stat_lock: Spinlock for handling statistics
>   * @isp_mutex: Mutex for serializing requests to ISP.
> @@ -175,7 +175,7 @@ struct isp_device {
>  	unsigned int irq_num;
> 
>  	void __iomem *mmio_base[OMAP3_ISP_IOMEM_LAST];
> -	unsigned long mmio_base_phys[OMAP3_ISP_IOMEM_LAST];
> +	unsigned long mmio_hist_base_phys;
> 
>  	struct dma_iommu_mapping *mapping;
> 
> diff --git a/drivers/media/platform/omap3isp/isphist.c
> b/drivers/media/platform/omap3isp/isphist.c index ce822c3..3bb9c4f 100644
> --- a/drivers/media/platform/omap3isp/isphist.c
> +++ b/drivers/media/platform/omap3isp/isphist.c
> @@ -70,7 +70,7 @@ static void hist_dma_config(struct ispstat *hist)
>  	hist->dma_config.sync_mode = OMAP_DMA_SYNC_ELEMENT;
>  	hist->dma_config.frame_count = 1;
>  	hist->dma_config.src_amode = OMAP_DMA_AMODE_CONSTANT;
> -	hist->dma_config.src_start = isp->mmio_base_phys[OMAP3_ISP_IOMEM_HIST]
> +	hist->dma_config.src_start = isp->mmio_hist_base_phys
>  				   + ISPHIST_DATA;
>  	hist->dma_config.dst_amode = OMAP_DMA_AMODE_POST_INC;
>  	hist->dma_config.src_or_dst_synch = OMAP_DMA_SRC_SYNC;

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2015-03-07 23:28 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-07 21:40 [RFC 00/18] Device tree support for omap3isp, N9[50] primary camera Sakari Ailus
2015-03-07 21:40 ` [RFC 02/18] omap3isp: Avoid a BUG_ON() in media_entity_create_link() Sakari Ailus
2015-03-07 23:19   ` Laurent Pinchart
2015-03-07 21:41 ` [RFC 07/18] omap3isp: Rename regulators to better suit the Device Tree Sakari Ailus
2015-03-07 23:26   ` Laurent Pinchart
2015-03-07 21:41 ` [RFC 08/18] omap3isp: Calculate vpclk_div for CSI-2 Sakari Ailus
2015-03-07 23:27   ` Laurent Pinchart
     [not found] ` <1425764475-27691-1-git-send-email-sakari.ailus-X3B1VOXEql0@public.gmane.org>
2015-03-07 21:40   ` [RFC 01/18] omap3isp: Fix error handling in probe Sakari Ailus
2015-03-07 23:17     ` Laurent Pinchart
2015-03-07 21:41   ` [RFC 03/18] omap3isp: Separate external link creation from platform data parsing Sakari Ailus
2015-03-07 23:23     ` Laurent Pinchart
2015-03-07 21:41   ` [RFC 04/18] omap3isp: DT support for clocks Sakari Ailus
2015-03-07 21:41   ` [RFC 05/18] omap3isp: Platform data could be NULL Sakari Ailus
2015-03-07 23:50     ` Laurent Pinchart
2015-03-07 21:41   ` [RFC 06/18] omap3isp: Refactor device configuration structs for Device Tree Sakari Ailus
2015-03-11 23:07     ` Laurent Pinchart
2015-03-07 21:41   ` [RFC 09/18] omap3isp: Replace mmio_base_phys array with the histogram block base Sakari Ailus
2015-03-07 23:28     ` Laurent Pinchart [this message]
2015-03-07 21:41   ` [RFC 10/18] omap3isp: Move the syscon register out of the ISP register maps Sakari Ailus
2015-03-07 23:34     ` Laurent Pinchart
2015-03-07 23:43       ` Sakari Ailus
2015-03-09 15:20         ` Tony Lindgren
2015-03-14 15:00           ` Sakari Ailus
2015-03-16  0:19     ` Laurent Pinchart
2015-03-16 23:21       ` Sakari Ailus
2015-03-07 21:41   ` [RFC 13/18] v4l: of: Read lane-polarity endpoint property Sakari Ailus
2015-03-07 23:49     ` Laurent Pinchart
2015-03-12 22:23       ` Sakari Ailus
     [not found]         ` <20150312222327.GM11954-S+BSfZ9RZZmRSg0ZkenSGLdO1Tsj/99ntUK59QYPAWc@public.gmane.org>
2015-03-12 22:25           ` Sakari Ailus
2015-03-07 21:41   ` [RFC 17/18] arm: dts: n950, n9: Add primary camera support Sakari Ailus
     [not found]     ` <1425764475-27691-18-git-send-email-sakari.ailus-X3B1VOXEql0@public.gmane.org>
2015-03-07 23:56       ` Laurent Pinchart
2015-03-08  0:03         ` Sakari Ailus
2015-03-07 21:41   ` [RFC 18/18] omap3isp: Deprecate platform data support Sakari Ailus
2015-03-07 23:35     ` Laurent Pinchart
     [not found]     ` <1425764475-27691-19-git-send-email-sakari.ailus-X3B1VOXEql0@public.gmane.org>
2015-03-13  9:40       ` Sebastian Reichel
2015-03-13 16:43         ` Tony Lindgren
2015-03-07 21:41 ` [RFC 11/18] omap3isp: Replace many MMIO regions by two Sakari Ailus
2015-03-07 23:43   ` Laurent Pinchart
2015-03-09 15:22     ` Tony Lindgren
2015-03-07 21:41 ` [RFC 12/18] dt: bindings: Add lane-polarity property to endpoint nodes Sakari Ailus
2015-03-07 23:46   ` Laurent Pinchart
2015-03-07 23:57     ` Sakari Ailus
2015-03-07 21:41 ` [RFC 14/18] dt: bindings: Add bindings for omap3isp Sakari Ailus
2015-03-11 23:39   ` Laurent Pinchart
2015-03-12 23:03     ` Sakari Ailus
2015-03-12 23:11       ` Laurent Pinchart
2015-03-12 23:43         ` Sakari Ailus
     [not found]       ` <20150312230320.GO11954-S+BSfZ9RZZmRSg0ZkenSGLdO1Tsj/99ntUK59QYPAWc@public.gmane.org>
2015-03-13  9:34         ` Sebastian Reichel
2015-03-14  0:33           ` Laurent Pinchart
2015-03-14 14:10           ` Sakari Ailus
2015-03-07 21:41 ` [RFC 15/18] omap3isp: Add support for the Device Tree Sakari Ailus
     [not found]   ` <1425764475-27691-16-git-send-email-sakari.ailus-X3B1VOXEql0@public.gmane.org>
2015-03-11 23:48     ` Laurent Pinchart
2015-03-14 14:12       ` Sakari Ailus
2015-03-07 21:41 ` [RFC 16/18] arm: dts: omap3: Add DT entries for OMAP 3 Sakari Ailus
     [not found]   ` <1425764475-27691-17-git-send-email-sakari.ailus-X3B1VOXEql0@public.gmane.org>
2015-03-07 23:51     ` Laurent Pinchart
2015-03-14 14:43       ` Sakari Ailus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2415325.xPjzqFQXie@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=pali.rohar@gmail.com \
    --cc=sakari.ailus@iki.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).